Models > 030214

030214 ((1984)) Cub Cadet Tiller - Overview

Sections of the 030214

[Viewing 1 of 1]
Diagram and Parts List for (1984) Cub Cadet Tiller
Keep searches simple, eg. "belt" or "pump".
Grommet – Part Number: 692189
Grommet
★★★★★
★★★★★
(1)
PartSelect #: PS9294797
Manufacturer #: 692189
This OEM grommet, also called a 90-degree breather tube, is sold individually. Black in color and made of rubber, this is a 90-degree elbow for the crankcase breather tube of your mower engine. If you...
$5.34
  In Stock
Grommet – Part Number: 692187
Grommet
★★★★★
★★★★★
(2)
PartSelect #: PS9064851
Manufacturer #: 692187
This grommet is an OEM part that is a 45-degree elbow for the crankcase breather tube of your mower engine. That is why it is also known as a 45-degree breather tube. The part is made of rubber and ...
$5.34
  In Stock
Diaphragm-Carburetor – Part Number: 270026
Diaphragm-Carburetor
★★★★★
★★★★★
(3)
PartSelect #: PS8937201
Manufacturer #: 270026
This is a carburetor diaphragm, which is an OEM part that pumps fuel from the tank to the engine. It is roughly 1x2 inches and black in color. Sold individually, this part can fail due to fatigue and ...
$3.99
  In Stock
Gasket-Fuel Tank – Part Number: 692241
Gasket-Fuel Tank
PartSelect #: PS9294811
Manufacturer #: 692241
$5.60
  In Stock
Clutch-Starter – Part Number: 399671
Clutch-Starter
★★★★★
★★★★★
(2)
PartSelect #: PS8968281
Manufacturer #: 399671
$37.32
  In Stock
Gasket-Breather – Part Number: 27549S
Gasket-Breather
PartSelect #: PS8943888
Manufacturer #: 27549S
The Breather Gasket is OEM and used to provide an airtight seal for the breather assembly. It is a gray part, attached between the breather cap and engine. Installation is rated "Easy" and will requir...
$4.99
  In Stock
Screw – Part Number: 692198
Screw
PartSelect #: PS9294799
Manufacturer #: 692198
$6.52
  On Order
Cap-Fuel Tank – Part Number: 494559
Cap-Fuel Tank
PartSelect #: PS8988296
Manufacturer #: 494559
$16.80
  In Stock
Screw – Part Number: 690953
Screw
PartSelect #: PS9073131
Manufacturer #: 690953
  No Longer Available
Armature-Magneto – Part Number: 591420
Armature-Magneto
★★★★★
★★★★★
(1)
PartSelect #: PS9035906
Manufacturer #: 591420
$61.65
  In Stock
Cap-Spring – Part Number: 690766
Cap-Spring
PartSelect #: PS9294523
Manufacturer #: 690766
$4.99
  In Stock
Ball-Clutch – Part Number: 691604
Ball-Clutch
PartSelect #: PS9064356
Manufacturer #: 691604
The clutch ball allows the center part of the ratchet to turn backwards freely but catch when turned forward in your engine. This is an OEM part that is made of metal, and it is silver in color. Thi...
$4.99
  On Order
View More
Back to Top

Questions And Answers for 030214

Be the first to ask our experts a question about this model!

Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Could not keep an aftermarket muffler on the engine.
Once I determined what OEM muffler I needed, installation was relatively easy. I have a 1982 4hp Briggs on my Snapper tiller. There was a 90* galvanized elbow coming out of the exhaust port, with a bezel nut to lock it down. Do not remove the elbow, even though it appears that you should. If you install the muffler without the elbow the muffler will parallel the the vacuum for the carburetor and can melt the rubber couplers. Use the elbow to direct the heat away from the carburetor. Use a pipe wrench to lock down the bezel nut because the weight of the muffler, especially under vibration, can work loose and fall down on the tine belt cover and melt it. The bezel nut that comes with the muffler should also be used to lock down the muffler to the threaded intake bracket that comes with the muffler, not to replace the bezel nut for the elbow.
Read less
Parts Used:
Muffler
  • Richard from KERNERSVILLE, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Wrench set
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top