Models > 021132-0599-E1

021132-0599-E1 Briggs and Stratton Engine - Overview

Sections of the 021132-0599-E1

[Viewing 3 of 3]
Keep searches simple, eg. "belt" or "pump".
Pulley- Spring Assembly – Part Number: 791499
Pulley- Spring Assembly
PartSelect #: PS9306669
Manufacturer #: 791499
  In Stock
Filter-Air Cleaner Foam – Part Number: 696923
Filter-Air Cleaner Foam
PartSelect #: PS9065516
Manufacturer #: 696923
  In Stock
Fuel Tank – Part Number: 696919
Fuel Tank
PartSelect #: PS9076866
Manufacturer #: 696919
  On Order
Nut (Rewind Starter) – Part Number: 690800
Nut (Rewind Starter)
PartSelect #: PS9064101
Manufacturer #: 690800
  In Stock
Starter Clutch – Part Number: 699871
Starter Clutch
PartSelect #: PS9078308
Manufacturer #: 699871
  Special Order
Gasket-Intake – Part Number: 696868
PartSelect #: PS9065513
Manufacturer #: 696868
  Special Order
Cap-Fuel Tank – Part Number: 696921
Cap-Fuel Tank
PartSelect #: PS9065515
Manufacturer #: 696921
  Special Order
Carburetor – Part Number: 696949
PartSelect #: PS9064769
Manufacturer #: 696949
  Special Order
Grip-Starter Rope – Part Number: 699944
Grip-Starter Rope
PartSelect #: PS9067513
Manufacturer #: 699944
  In Stock
Gasket-Intake – Part Number: 696867
PartSelect #: PS9064766
Manufacturer #: 696867
  Special Order
Spacer-Carburetor – Part Number: 696870
PartSelect #: PS9065089
Manufacturer #: 696870
  Special Order
Sleeve-Fuel Line – Part Number: 699876
Sleeve-Fuel Line
PartSelect #: PS9065644
Manufacturer #: 699876
  In Stock

Questions And Answers for 021132-0599-E1

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
February 21, 2023
With spark plug in it in very hard almost impossible to pull the crank rope, with the spark plug out it pulls very easily. What may be the cause?
For model number 021132-0599-E1
PartSelect logo
Hello Ken, thank you for the great question. According to our research on your model, the starter crank rope can get stuck due to hydraulic lock, which is caused by oil getting trapped in the combustion chamber. You will need to release the compression spring and the oil, so remove the spark plug and then give the cord a tug. Don’t be surprised to see some oil run out through the hole where the spark plug is. We hope this information is useful!

Was this helpful?
Thank you for voting!
  • 1