Lawn Mower Caps and Lids
Find your partEnter your model number or a part number and click "Search"
Here is an example model number plate:
Popular Lawn Mower Caps and Lids
Cap Axle Black 1 50 x 1 00
PartSelect Number PS9007667
Manufacturer Part Number 532104757This genuine black cap axle, also sometimes known as the dust cap, is around 2 inches in diamater and sold individually. Comprised of plastic, it is designed to keep debris out of the hub and axle of your lawn mower or garden tractor. Over time, your dust cap may become damaged or lost due to wear and tear. If this happens, dirt and debris can freely enter the axle and hub, causing damage. This is an easy repair to make and does not require any tools. Just look for the cap axle on the rim of the wheel to make your repair.
Anthony from OLIVEHILL, TN
Wheel bushings were badRemoved old clip removed rim from tractor, removed grease fitting on rim, took hammer and screw driver knocked out old bushing turned rim over knocked out other bushing. Press in new bushings reinstalled grease fitting slide tire back on tractor, put retaining washers on then locking clip put on dust cover grease at grease fitting. Repeat other side. Read more...
Cover, Dust, Wheel
PartSelect Number PS9982436
Manufacturer Part Number 581840401The Dust Shield is a 6-3/4 inch, black plastic part, used to prevent dust or debris fouling the wheel or axle. It attaches inside of the wheel around the axle. Installation is rated as "Easy" and will require a wrench. If broken, damaged, or worn due to fatigue, you will see visable damage and you may have debris getting caught in the axle. If broken, replace it. Refer to your make, model and diagram to make sure you're choosing the right part. This part comes individually sold.
Boot, Rear Axle, Thick Flange
PartSelect Number PS10001069
Manufacturer Part Number 7075115YPThis rear axle, thick flange boot, also known simply as the boot, protects the rear axle of your riding lawn mower/tractor. It measures 4.75 x 3 inches, and is black and made of plastic. This part can dry out and crack due to fatigue and wear; you may notice a rip in it, and debris entering the hub of your mower. When this occurs, it is time to replace the boot, which our customers rated as a medium-difficulty repair. You will need to attach your new boot to the rear axle of your machine, and the repair will require a screwdriver, pliers, a socket set, wrench set, and snap ring pliers.
PartSelect Number PS9140447
Manufacturer Part Number 796577
PartSelect Number PS9306848
Manufacturer Part Number 795027
PartSelect Number PS9294822
Manufacturer Part Number 692298
PartSelect Number PS9306771
Manufacturer Part Number 792647