Parts That Fix General Electric Washer WDSR2080D5WW Will Not Start
Will Not Start is a commonly reported symptom for the WDSR2080D5WW General Electric Washer, and we have put together a full guide on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your WDSR2080D5WW General Electric Washer that will fix Will Not Start. We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!
This timer knob or control knob assembly is designed for a washing machine, and comes with a retaining clip. It attaches to your timer dial and allows you to turn the timer. The main reason you would need to replace the timer knob, is if the teeth on the inside of it are worn, and will not allow you to adjust the timer. This part is sold separately from the timer dial. To complete this repair, you will need a pair of needle nose pliers to disconnect the old retaining clip.
Used in conjunction with the timer dial knob assembly.
This part is a replacement knob dial for your washer. The knob dial rotates and allows you to select your desired settings. It is a round piece of white plastic with a small, triangular gray arrow on it. The knob dial is 3 inches in diameter and is sold individually. The control knob that attaches to it is sold separately. If your knob dial is worn, loose, or damaged, it may need to be replaced.
This clip ensures that the knob is securely fastened to the control shaft, allowing you to properly select the correct time and setting for your dryer. If your dryer will not start or shut off, the timer will not advance, or the dryer shuts off too soon, the issue may be the control knob itself. This clip is sold individually. Although this part fits with some different brands, be sure to check the list of brands below to make sure it fits with your dryer unit. Refer to the manual provided by the manufacturer for further installation instructions.
This knob accepts a D-shaped shaft.
This part increases the voltage to the drive motor to help start it.