This is a single roller and it is a part for multiple appliances in your household. You may also know this as a bearing roller or a wheel assembly. It is roughly one inch by one inch in size, and is s...
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bruce
March 7, 2020
I am looking for a pivot arm to make the hood rise on my downdraft hood.
For model number ZVB36SB3SS
Hello Bruce, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS223612. I looked up the part and it is listed as No Longer Available/Discontinued sorry. There are no part substitutions listed. Our suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. We hope this helps.
Disconnected power and removed electrical cover Disconnected wires from old controller one a time and connected to new controller as to not mismatch wire connections. Left new controller hanging off wires. Raised vent and held using wood blocks to expose gap to use 1/4 inch wrench to undo screws from the inside (poor design for
... Read more replacing the controller - this was the bulk of my time.) if this didn't work, I would have had to disassemble more of the downdraft. Installed new controller. Removed chocks, enabled power and tested...after verified, re-installed electrical cover.
