The rack track stop on your dishwasher is designed to stop the dish rack at the appropriate place when opening and closing the rack. If your dishwasher is not cleaning your dishes properly, the rack s...
This part is a door balance link kit, also sometimes known as door cable or door spring cable kit, that helps support the door as it opens and closes by connecting to the dishwasher door hinges. The k...
This upper dish rack wheel mount can be used on either side of your dish rack. It is sold individually. The part includes the wheel and support, which attaches to the dish rack and allows it to slide in and out easily.
The mounting bracket is sold individually, without screws. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking,...
This is a door seal, but you may also know it as a door gasket and it is a part for your dishwasher. It provides a leak proof seal between the tub and the door of your appliance. You will need to repl...
The rubber washer is a part which is specific to dishwashers and should not be substituted by a similar part. It works with the heating element to seal the receptacle opening where the heating element...
This part releases the detergent and rinse aid into the dishwasher.
$90.08
In Stock
Questions And Answers for KUDI01FLSS3
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mike
March 7, 2023
No power to the dishwasher, no lights on and the breakers are working. Tried resetting power but no luck
For model number KUDI01FLSS3
Hi Mike, thank you for your inquiry. First, you may need to check the power cord, part number PS358548. To determine if the power cord is defective, use a multimeter to test it for power. If the power cord is not getting power, you may need to replace it. If there is no issue with the power cord, you may need to check the thermal fuse, part number PS774514. The thermal fuse shuts the dishwasher off if it shorts out or overheats. If the problem persists, then the most probable cause may be a faulty control board, part number PS11746116. You can inspect the board for signs of burning or a shorted-out component. You can also use a multimeter to test the power output terminals on the board. If it is faulty, you may need to replace it. We hope this helps!
Pulled dishwasher from under counter, attached link to spring, hooked spring back into frame/chassis, threaded link through pulleys, attached other end of link onto door, reinstalled dishwasher under counter. All's well. Note-I purchased an extra link anticipating that the other one will fail. They're cheap enough.
This wheel mount broke from normal use and made the upper dish rack disconnect from the sliding arm that extends it outside the dishwasher body so that you can fill it. The part was delivered quickly and was easy to install using just a screwdriver to loosen the retainer clip on the end of the extension slide. Once the retainer clip was r
... Read moreemoved, the new part was slid into place and clipped onto the rack. The install was complete.
I had to fiddle with the mount a bit to get it on the rack properly. Then I pulled back slightly on the inner part of the end piece of the track while also pulling the top of the piece back and released the inner tip of the piece, allowing the end piece to be removed. I placed the new wheel in the track and replaced the end piece.
... Read more Super easy and a small fraction of what a repairman had told me the part would cost.