This filter is made of metal and is intended for use with ranges and cooktops. Grease filters are an important but often neglected part of ranges. If the filter is full, your extractor fan will become...
This bake element is for the bottom of your oven. The bake element supplies heat for baking. If you find there is little to no heat when baking, a burned out bake element, or food is taking too long t...
This long oven sensor is also commonly known as a temperature sensor. It is designed for use with ovens and ranges. It is similar to a thermostat; it measures and regulates the internal temperature of...
This is a leveling leg for your oven, range, or stove. The leveling legs on your oven allow your appliance to sit perfectly flat. The new one may be longer in length than your original, but will work...
This surface burner switch, also known as an infinite switch, controls and regulates the heat output of the burners on a stovetop. The user simply adjusts the knob on the user interface panel, which i...
This is a replacement oven rack and it is designed for use with ranges and ovens. This is a genuine OEM replacement part. The rack provides a level and stable surface for cookware inside of your appli...
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
This is a radiant surface element with limiter, and it works in conjunction with your range. The function of this part is to give heat to the surface directly above it, on cooking area stove top.This ...
The oven door gasket on your range functions as a seal between the warm interior of your oven, and the outside. It prevents heat from fleeing your oven when the door is closed. Before making any repai...
This part is for oven ranges, it connects individual wires and protects the device from electrical surges, voltages, and current. With this part, the house power is connected to the range wire harness...
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Luke
November 15, 2022
The display shows both elements turned on during baking cycle warmup, but the broil element never glows like the baking element. The broil element works fine during broil cycle. Should both elements be on during baking?
For model number JES9800AAB
Hi Luke, thank you for contacting us. Generally, the bake settings use only the lower element. Preheat setting turns on both elements, it is the setting to use for recipes requiring a cold start in the oven. After the warmup, the oven switches to the bake element and maintains the temperature with only the lower element. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Joe
July 12, 2023
Control panel alarms and scrolls F1-1 call authorized dealer when appliance is not in use
For model number JES9800AAB
Hello Joe, thank you for contacting us. The F1-1 error code means that your oven thinks your lower oven sensor is shorted. Power unit down by turning off the circuit breaker(s) for one minute. Power unit up by turning on the circuit breaker(s). Monitor the oven for one minute to ensure the error code does not display again. Verify oven operation. If it does not solve the problem, we recommend replacing the temperature sensor, part number PS1570174. We hope this sorts out your problem!
What is the difference between the AAW and AAB model? I need an ignition switch for my JES9800AAW range.
For model number JES9800AAB
Hello Ardner, thank you for your question. JES9800AAW is a white unit. JES9800AAB is a black unit. The switches for both models would be the same. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Was this helpful?
Thank you for voting!
Patty
February 29, 2024
heat element not getting up to temp. on regular bake. convection roast does
For model number JES9800AAB
Hello Patty, thank you for contacting us. Based on the description that you have provided, we would recommend checking the bake element, part number PS11744404, to solve the problem. We hope this helps.
My vent quit working. What part is needed to fix it?
For model number JES9800AAB
Hi Janet, thank you for contacting us. To fix the issue, we would recommend checking the blower motor, part number PS11750204. We hope this solves your problem!
First, I unplugged the oven. Then, I removed the two screws that hold the element in place. After that, I gently pulled the element toward the front of the oven until the wires were exposed. I disconnected the wires from the old element, removed the old element and then attached the wires to the new baking element. I gently pushed the
... Read more new element back into the screw holes and screwed the new element in place. When I plugged the oven back into the wall I heard a pop and thought I'd blown up the oven! Turns out the breaker popped...after fixing the breaker, I turned the oven on and the element worked just fine. I highly recommend PartSelect.com for their fast shipping and great products. I will be ordering from them again for future appliance parts.
Removed the oven door by opening slightly, then pic door up to remove. Remove 2 screws holding oven sensor in place, gently pull on sensor to remove, had to remove about 8 inches to get at plastic connector. Unplug connector, had to use an adapter cable supplied with the PartSelect kit to install new sensor, push cable back into opening,
... Read morereinstall 2 screws. The oven works fine! Note that due to thermal lag the temperature overshoots to 370 degrees and undershoots to 340 degrees, this appears to be normal oven operation. Putting door back in place was easy.
