Models
>
JED8430ADB
JED8430ADB Jenn-Air Cooktop - Overview
Sections of the JED8430ADB
[Viewing 6 of 6]
Manuals & Care Guides for JED8430ADB
Click to downloadKeep searches simple, eg. "belt" or "pump".
Infinite Switch Knob - black
PartSelect #: PS11744334
Manufacturer #: WP74009592
This infinite switch knob is two inches long. It is black in color and is made of plastic. This knob has a white indicator dot. Sold individually.
$26.81
In Stock
Cooktop Downdraft Vent Grease Filter
PartSelect #: PS11757584
Manufacturer #: WPY706012
This is a grease filter, and it works with your range/stove/oven. This part is chrome-colored and measures 16.5 inches long by 9 inches wide. It is made of metal and is intended for use with downdraft...
$48.41
In Stock
Screw, 8/18 x 3/8
PartSelect #: PS11746840
Manufacturer #: WP90767
This screw is sold individually.
$5.42
In Stock
Fan Knob
PartSelect #: PS11744721
Manufacturer #: WP7739P122-60
This knob accepts a D-shaped shaft.
$23.11
In Stock
Surface Burner Switch
PartSelect #: PS12070671
Manufacturer #: W11088181
This is the replacement surface burner switch for your range. It measures approximately 1.5 inches by 1.5 inches, with a shaft that is approximately 1 inch long. The surface burner switch turns the su...
$83.91
In Stock
Dual Surface Burner Switch Kit
PartSelect #: PS2003583
Manufacturer #: 12002125
This switch is used to operate the dual surface burner.
$89.03
In Stock
Cooktop Cleaner
PartSelect #: PS2344170
Manufacturer #: TJ114
Cleans/Polishes all glass, ceramic, porcelain and fiberglass surfaces.
No Longer Available
6 Inch Element with Limiter
PartSelect #: PS11764912
Manufacturer #: W10823704
This element can be used for the left front or right rear.
$268.43
In Stock
Main Range Top
PartSelect #: PS2084686
Manufacturer #: 74007072
This range top is black in color and is made of metal and glass. This top assembly has four holes for burner knobs.
$537.03
In Stock
Questions And Answers for JED8430ADB
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Frank
May 27, 2022
One of the big elements stays on high even if you turn it to low
For model number JED8430ADB
Hello Frank, Thank you for the question. This is an indication the switch that controls the element is faulty and will need to be replaced. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Dual Surface Burner Switch Kit
$89.03
In Stock
Jack
May 8, 2023
push button switch for the fan to turn on and off will not pop up any more
For model number JED8430ADB
Hello Jack, thank you for the query. According to our research, you may need to replace the fan control switch, part number PS11744308, to fix the issue. We hope this solves your problem!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Fan Control Switch
$157.94
In Stock
Kevin
March 5, 2024
Can you reduce 6” exhaust pipe down to 4”
For model number JED8430ADB
Hi Kevin, thank you for contacting us. Based on our research, a side clearance of at least 6 inches is recommended for optimum ventilation. We hope this information helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Annette
March 17, 2024
The front right burner will not turn off on this stovetop
For model number JED8430ADB
Hi Annette, thank you for reaching out. Based on our understanding, the issue could be with the dual burner infinite switch, part number PS2003583. It turns the surface element on and off and controls how much heat the element produces. You may need to replace it to fix the issue. We hope this solves your problem!
Was this helpful?
Thank you for voting!
Related Parts:
Dual Surface Burner Switch Kit
$89.03
In Stock
James
February 10, 2024
NONE OF MY ELEMENTS COME ON. i UNDERSTAND IT COULD BE A SURFACE BURNER SWITCH.
WOULD THAT BE CORRECT?
ALL THE KNOBS LIGHT UP, JUST NO ELEMENTS COME ON.
For model number JED8430ADB
Hello James, Thank you for your inquiry. It could be one of the switches, but where all the elements are not coming on, then it could be a wiring issue. Check for any loose or damaged connections. Good luck with your repair.
Was this helpful?
Thank you for voting!
Related Parts:
Surface Burner Switch
$83.91
In Stock
Dual Surface Burner Switch Kit
$89.03
In Stock
Surface Burner Switch
$79.55
In Stock
- < Prev
- 1
- Next >
Common Symptoms of the JED8430ADB
[Viewing 2 of 2]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Outer element of dual element burner didn't work
Remove Ceran Galss top by removing hex screws below the rim. Also remove the two opposing screws in the center of the downdraft opening. Ceran top comes off easily now.
The instructions with the new switch were very poorly written, so here is how I got the new switch to work:
Attach the black wire(s) from the old switch (termi ... Read more nal 2) to the new switch terminal P1. Also attach the jumper cable to P1 and "jump" it to S1.
Attach the orange wire (old switch terminal 5) to S2
Attach the yellow wire (old switch terminal 4) to 4a
Attach the tan/(white?) wire (old switch terminal 3) to terminal 4 on the new switch
Attach the single red wire from the right front element to terminal 2 on the new switch.
Attach the 'compound' red wires (the ones that come from the left rear/outlet connection and is also attached to the right rear switch) to terminal P2 on the new switch.
There is no need to seperate the compound red wires as the instructions might lead you to believe.
Good Luck
The instructions with the new switch were very poorly written, so here is how I got the new switch to work:
Attach the black wire(s) from the old switch (termi ... Read more nal 2) to the new switch terminal P1. Also attach the jumper cable to P1 and "jump" it to S1.
Attach the orange wire (old switch terminal 5) to S2
Attach the yellow wire (old switch terminal 4) to 4a
Attach the tan/(white?) wire (old switch terminal 3) to terminal 4 on the new switch
Attach the single red wire from the right front element to terminal 2 on the new switch.
Attach the 'compound' red wires (the ones that come from the left rear/outlet connection and is also attached to the right rear switch) to terminal P2 on the new switch.
There is no need to seperate the compound red wires as the instructions might lead you to believe.
Good Luck
Read less
Parts Used:
-
Michael from Collierville, TN
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Socket set
137 of 178 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The repair itself was very easy. “How to connect” was very hard to get.
The repair itself was very easy. “How to connect” was very hard to get.
To get access to the switch, unscrew 2 screws from each side of front panel and then 4 screws from the bottom of it (open the door first). Have a box or a small table about 30” high to use it as support for the front panel.
The end result ... Read more (colors for the Right Front- R.F.- burner) : Old label -> New label
1. Double RED: N -> P2 (incoming power, Line 1)
2. Single RED: N -> 2 (to Inner AND Outer heating elements common wire)
3. Single BLK: L1 -> P1 (incoming power, Line 2)
4. Single TAN: H1 -> 4 (to the Inner heating element)
5. Single YEL: H2-> 4a (to the Inner heating element)
6. Single BLK: P -> S2 (to the R.F. indicator control light)
7. Attach jumper black wire (included with new switch) from P1 (P1 has two connectors close together) to S1.
Done.
To get access to the switch, unscrew 2 screws from each side of front panel and then 4 screws from the bottom of it (open the door first). Have a box or a small table about 30” high to use it as support for the front panel.
The end result ... Read more (colors for the Right Front- R.F.- burner) : Old label -> New label
1. Double RED: N -> P2 (incoming power, Line 1)
2. Single RED: N -> 2 (to Inner AND Outer heating elements common wire)
3. Single BLK: L1 -> P1 (incoming power, Line 2)
4. Single TAN: H1 -> 4 (to the Inner heating element)
5. Single YEL: H2-> 4a (to the Inner heating element)
6. Single BLK: P -> S2 (to the R.F. indicator control light)
7. Attach jumper black wire (included with new switch) from P1 (P1 has two connectors close together) to S1.
Done.
Read less
Parts Used:
-
Igor from Campbell, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers, Screw drivers
51 of 60 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old switch had shorted and burned out
This was a range top. i removed the 12 hex machine scews holding on the top, then removed the two star screws holding the old switch. there were fore wire that had fitted on tabs. Hooked them to the new swtch and reassembeld. Easy repair since i could lift the unit out without disconnecting main cables. Replacement range would have
... Read more
been oveer $1000. Psrt was under $40 and delivered in a matter of days.
Read less
Parts Used:
-
Larry from Hampton Cove, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
37 of 50 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!