This OEM 40 watt appliance light bulb is used for some ranges, refrigerators, freezers, and microwaves. Simply locate the existing bulb, unscrew it from its socket, and replace with new light bulb. If...
The oven temperature sensor for your range may also be called a probe. The quick connect on this part may differ than your original piece. If the temperature sensor does not fit you will have to cut o...
This OEM broiler pan and grate insert are cooking accessories used in your oven to broil food. The pan catches drippings and prevents them from falling into the appliance, while the grate insert ensur...
The oven light socket allows you to screw in a light bulb so that you can see the inside of your oven. The light socket is located in the back of your oven, so you will need to remove the back panel t...
This flat glow bar igniter is designed for gas ovens. The function of the part is to ignite the gas to light the oven burner. If your gas igniter does not glow, or if it glows but will not light, you ...
This oven rack is a genuine OEM part that measures approximately 18 1/4 by 15 inches. It acts as a shelf for placing food while it cooks or bakes in your oven. You will find it inside the oven cavity,...
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Diane
February 4, 2020
Does this gas or propane wall oven need to be vented to the roof of home? Thanks
For model number FGB24L2ASA
Hello, Thank you for your question. I apologize but we do not have a vent listed for your model. Usually that means that there is not a vent for it. Thank you for your inquiry, good luck with this repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Amanda
March 7, 2020
My oven wont heat up. What could be wrong?
For model number FGB24L2ASA
Hi Amanda, thank you for your question. There are a few parts that could cause this issue in your appliance. First I would say test your elements with a multi meter to see if they are working correctly or not. They should be reading between 0 - 50 ohms to be working correctly. The other part you should check would be your oven temperature sensor. That can also be tested with a multi meter and should be reading between 1000 - 1100 ohms. If those three parts are fine however, then the issue may be in your control board. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Abdol
September 13, 2021
When I turn on the oven it takes some time before it comes on and it smell gas continually. What is your recommendation?
For model number FGB24L2ASA
Hello Abdol, Thank you for the question. This is normally caused by a weak Glow Bar Igniter. It should draw 3.2 to 3.6 amps or produce 3.2 to 3.6 VAC at the oven safety valve terminals while the igniter is glowing. You can test the igniter with a multimeter to determine if it is defective. The flat glow bar igniter is in the back of your gas oven. You will need to remove the access panel on the back of your oven to disconnect the igniter. Be sure that the gas source to the oven is shut off before you begin this repair. We hope this helps!
When I turn oven on, it will light and flame up, but then goes out. Is this just a dirty flame sensor
For model number FGB24L2ASA
Hello James, thank you for asking. According to our research, we would recommend checking the following parts to fix your issue: temperature sensor, part number PS820208, igniter, part number PS444179, burner, part number PS456669, and safety valve, part number PS446294. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!
Hi Linda,
Thank you for your question. The F1 error code means that there is an electronics failure within the oven. This failure can occur within the keypad itself, the electronic oven control or the oven temperature sensor. For your model, the keypad and the electronic control board are one part. The error may also occur if the oven thermostat overheats, as the sensors in the oven cannot calibrate correctly when the thermostat is not functioning properly. The error can also indicate that you have a faulty electronic control board. Try pressing the cancel button to see if this will remove the error code. If it goes away, reset the oven to its previous settings. If the error code remains, cut the power to the wall oven for 5 minutes. If the error code returns after restoring power to the oven, there is an issue with the electronic control board and it will need to be replaced. We hope this helps. Thank you and have a great day.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Replaced clock control by removing surface burner control knobs and plastic nuts, and then the cover over the oven control. Two screw hold the clock in place, after removal and disconnecting the plug-in you can reinstall the new clock control. The Heat Sensor inside the oven will also need to be replaced. It is located inside the oven
... Read moreand attached with two screws; the back of the oven will need to be removed to unplug. Reverse removal procedure and turn the power back on to the stove.
Turned power off at electrical panel. Pulled oven away from wall. Removed back cover (6 screws), then unplugged wires from old receptacle. I had to pull the squeeze clips backwards & break them to remove the old receptacle - couldn't squeeze them enough to remove them otherwise. The old receptacle came out through the inside of the oven,
... Read moreand the new one snapped in easily from inside the oven as well. Replaced wiring, installed new bulb, restored power & tested. Replaced back cover. Good time to vacuum under/behind where the oven usually lives before sliding it back to the wall.