Models
>
AD25BSS0
AD25BSS0 Whirlpool Dehumidifier - Overview
Sections of the AD25BSS0
[Viewing 3 of 3]Manuals & Care Guides for AD25BSS0
Click to downloadKeep searches simple, eg. "belt" or "pump".
Dryer Screw
PartSelect #: PS11748297
Manufacturer #: WPW10109200
11-16 x 3/4 Sold individually.
$7.95
In Stock
Humidistat Control
PartSelect #: PS11738359
Manufacturer #: WP1168670
The humidistat control, used in dehumidifiers, switches the dehumidifier on and off automatically to maintain humidity. If the switch does not work, the humidifier will not maintain the temperature pr...
$81.09
In Stock
Bucket Water Level Switch
PartSelect #: PS992307
Manufacturer #: 1188814
This part is for your dehumidifier. The bucket water level switch is used to prevent water overflow when the bucket is full. You will not be able to tell if the switch has failed just by looking at it...
$102.77
In Stock
Zip Tie
PartSelect #: PS11753208
Manufacturer #: WPW10339879
A zip tie, also known as a cable tie or a wire tie, is a fastening device that holds wires or tubing together. If a machine has wires or tubing that are easily shifted, you need to hold them tightly t...
$8.04
In Stock
VALVE
PartSelect #: PS403685
Manufacturer #: 978030
This access valve is an authentic manufacturer parts kit used in appliances with a refrigerant such as the refrigerator and air conditioner. This kit includes a valve body, valve core and a valve cap....
$52.72
In Stock
Questions And Answers for AD25BSS0
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The Origional Humidistat Quit Working
The knob one turns to set the humidity level was removed. The two screws holding the top on were removed. The top was lifted and swung to the side. After noting which of the two wires went where on the humidistat the wires were removed. Small flat screwdrivers were used to pry back the plastic retainers on one side of the original fai
... Read more
led humidistat. The new one was put in place, the two wires were reattached. The knob was replaced. The top was positioned and its two retaining screws replaced. A magnetic phillips screwdriver was handy but not necessary. Piece of cake! Someone with ten thumbs could do it!! Thanks for the prompt courteous attention to the returned erroneous part! Dealing with partselect. Com was a pleasure. . . . . . Thanks!! P. S. The dehumidifier works like new now!!
Read less
Parts Used:
-
James from Silver Bay, MN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
9 of 16 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the humidity control broke
Taking the case apart and replacing the control unit was a piece of cake. And the part arrived the very day after I ordered it.
Parts Used:
-
larry from tampa, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
8 of 17 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken plastic wheel on dehumidifier so it wouldn't stand up straight.
I was able to pull the old wheel off and then went to google on the computer and put in whirlpool dehumidifier. I was directed to a website where I could put in the model # of the appliancew and then was able to view pictures of repair parts. I was able to view the actual caster and determine that I was ordering the right one. The part ca
... Read more
me about 3 days later and I was able to snap it on without using any tools. There was alittle plastic guide to hold aside and slide the new caster in place.
Read less
Parts Used:
-
Charles from So. Orleans, MA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
6 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!