Frigidaire Washer Latches

Your Price

$20.46

Frigidaire Washer LATCH

★★★★★

8 Reviews

PartSelect Number PS11766033

Manufacturer Part Number 5304505088

Fixes these symptoms

Lid or door won’t close
Locking Issues
Will Not Start
See more...

Installation Instructions

Kim from LAFAYETTE, CA

latch broke, door wouldn't shut, washer wouldn't run - no fun

I googled the problem, read the recommendation found the part and read that it was an easy fix. Took the broken part off the door and noticed the broke off piece was in the latch on the machine. Ordered the two parts, paid the $30 2-day delivery. Parts arrived and the machine was up and runnning in under 5 minutes Read more...

Videos!

Your Price

$13.76

Frigidaire Washer Door Strike

★★★★★

62 Reviews

PartSelect Number PS890617

Manufacturer Part Number 131763310

The door strike on your washing machine allows your washer door to lock properly, and operate efficiently. If you notice that your washer door will not open or close, leaks or the washer will not start or spin, you may need to replace the door strike. This part is for front load washers and is white in color. The part is made of plastic and is roughly 2 inches in length. To complete this repair, you will only need a Phillips screwdriver. Most of our customers found this repair to be easy and took less than 15 minutes to complete it. This part is sold individually, not as a part of a kit, and is a genuine part approved by the original manufacturer.

Fixes these symptoms

Door latch failure
Door won’t close
Leaking
See more...

Installation Instructions

Joy from Columbia, MO

Broken Door Catch

This was one of the simpliest repairs I have ever done taking less than 5 minutes to complete. On the inner door I removed the two screws that hold the plastic catch in place. I then removed the broken catch and put the new catch in place. Finally I replaced the two screws that hold the catch in place and it was done. Read more...

Videos!

Your Price

$20.16

Frigidaire Washer Door Striker

★★★★★

18 Reviews

PartSelect Number PS2378364

Manufacturer Part Number 131763302

This is a door striker, it is gray in color and is a part found on your washer. The purpose of the striker is to keep your washer door closed for usage. This piece will attach to your appliance lid and will activate the door switch when your lid is closed. The most common reasons for needing to replace this part are if your lid will not consistently open or close, and your washer will not consistently start. The only tool you will need to complete this installation is a Phillips screwdriver.

Fixes these symptoms

Door won’t close
Lid or door won’t close
Locking Issues
See more...

Installation Instructions

Paul from Grinnell, IA

Door Striker broke which was a result of the hinge problem.

Removed the screws holding the door. (One was stuck a little so used an air drill with Phillips head to get the torque needed but someone with a strong grip could have done it as it came out very easily). I removed most of the screws holding the front to back of door to exchange the hinge. There was a problem with the old hinge slopping around and not allowing the door to align properly when shutting it. The new hinge works better. See note*** below on doorframe. I pretty much was able to get the door back together and make it work. I then exchanged the door striker with no problem. It has a built in key so you cannot attach it incorrectly. The next thing was to just reattach the door to the machine and it worked right off the bat. ------------- *** Unfortunately, there were two screw mounts in the Outer Door Frame - Chrome Part Number: PS3495258 that were broken. This doorframe is listed as a $200+ chrome part whereas it is actually a plastic material that is extremely over priced for what it is. Like I mentioned two of the screw mounts had broken off so those screws are just "decoration" now. (These are screws that basically hold the back cover to the front cover). If this becomes a problem, I will simply modify what I have and make the screws fit before I spend $200+ on that part. (It looks like this could be drilled out and a long screw and nut run through to make it work. TELL THE WASHER OPERATOR… just be careful opening and closing the unit (don't slam the door but carefully close it) and it should work a lot longer. I might investigate the make up of a washer the next time I buy one … but the chrome vs. plastic is a hard one to spot. I hope this helps. Read more...

Your Price

$73.51

Frigidaire Washer Pedestal Latch

★★★★★

9 Reviews

PartSelect Number PS2349356

Manufacturer Part Number 137006200

This latch attaches to the pedestal cabinet and engages the drawer strike to keep the drawer closed. If your drawer is not closing properly or your latch is damaged, this is the part you will need to replace. This part is white in color, and it made entirely of plastic. This part is 1-1/2 inches in length and 2 inches in width. This is an OEM part sourced directly from the manufacturer. This part is sold individually. To complete this repair, you will need to take the drawer off the sliders. At this point, you will be able to access the latch and swap it out.

Fixes these symptoms

Door won’t close
Lid or door won’t close
See more...

Installation Instructions

Suzanne from PALM SPRINGS, CA

The Pedestal Latch Broke

I found the right part by looking at YouTube videos. Ordered from PartSelect and it arrived within a week. I looked at directions PartSelect had given to others and I also re-watched the videos. To remove the pedestal drawer you need a Phillips screwdriver and an adjustable wrench or the exact size spanner or a socket set (if you have straight-on access which I didn't). I didn't feel like going out to the hardware store so I used my Felco Pruners to remove and reinstall the pedestal drawer. I just held the nut gently in the jaws of the pruners and it worked great for the removal and not quite as well for the reinstall of the drawer, but still ok under the circumstances. The most valuable piece of advice that PartSelect gave someone else is which side of the pedestal latch goes up. It's the side that has an extra indentation. Now that I've put in the new pedestal latch, I'm never using the pedestal drawers again. I've moved all my laundry supplies to baskets on the counter, because I read reports from others that these latches break all the time and I don't relish replacing a $55 part every year or so. However, I'm grateful to PartSelect for having the part, providing instructions, and shipping in a timely manner. Read more...

Your Price

$24.24

Frigidaire Washer Door Catch

★★★★★

13 Reviews

PartSelect Number PS417389

Manufacturer Part Number 131279001

This washer door catch is a replacement from the original. This is only available in black.

Fixes these symptoms

Door latch failure
Leaking
Lid or door won’t close
See more...

Installation Instructions

Maryann from Sandy Hook, CT

The door catch broke and the door would not close.

First, I had to remove 2 screws to take off the 2 broken pieces of the door catch. Then I put the new one on using the same 2 screws. The door is now able to close, but does not lock properly. In order to make it work, I put a thin piece of rubber into the place where the door meets the machine. This causes the lock to engage and the machine to work. I don't know how much longer it will work since the repairman claims that the main bearing is going, but hopefully it will last a bit longer.

Part Select got the part to me in one day using the standard shipping, which was impressive. I just wish that I hadn't wasted money on calling a repairman only to have him tell me that he didn't have the part. He charged for the visit anyway even though I told him ahead of time the problem and the model of my machine. Read more...