Frigidaire Washer Panels
Find your part
Enter your model number or a part number and click "Search"Here is an example model number plate:
Popular Frigidaire Washer Panels
Your Price
$89.37
Bottom Panel - White
PartSelect Number PS975731
Manufacturer Part Number 134321702
This is the replacement bottom panel or access panel for your dryer or washer. It is white in color and is approximately 28 inches wide and 10 inches tall. The access panel can be removed from the bottom of your dryer, so you can access the parts behind it. The main reason that you would want to replace the panel is if it is damaged, or it will not stay attached to the dryer. This part is sold individually and is an authentic OEM part sourced directly from the manufacturer.
Fixes these symptoms
- Leaking
- See more...
Your Price
$167.13
Your Price
$140.22
Your Price
$177.84
Your Price
$109.62
Your Price
$143.38
Your Price
$182.81
Top Panel
After I finally got all of the parts (at least the rear brackets and screws) I found that the panel only had one of two holes for the two horizontal screws.
After drilling a new hole in the left rear bracket position, I discovered that the 2 screws could not be threaded into the bracket pilot holes. Theyt froze up at the top of the taper in the threads. I had to increase the size of the hole 1/64" to get the screws in. There also is a trick to getting the bracket through the punched out hole in the panel- you must angle the bracket corner to corner then apply about 10# of preasure to the bracket to force it through the hole.
Other than that, the panel install went pretty well. Now I have to get the front brackets and springs and screws which are on backorder... Read more...
PartSelect Number PS419347
Manufacturer Part Number 134086842
Installation Instructions
RICHARD from RAVENSDALE, WA
No top Panel
(This is reply #2 of 2)After I finally got all of the parts (at least the rear brackets and screws) I found that the panel only had one of two holes for the two horizontal screws.
After drilling a new hole in the left rear bracket position, I discovered that the 2 screws could not be threaded into the bracket pilot holes. Theyt froze up at the top of the taper in the threads. I had to increase the size of the hole 1/64" to get the screws in. There also is a trick to getting the bracket through the punched out hole in the panel- you must angle the bracket corner to corner then apply about 10# of preasure to the bracket to force it through the hole.
Other than that, the panel install went pretty well. Now I have to get the front brackets and springs and screws which are on backorder... Read more...
Related Parts
- All Frigidaire Washer parts
- Frigidaire Washer Belts
- Frigidaire Washer Brackets and Flanges
- Frigidaire Washer Caps and Lids
- Frigidaire Washer Circuit Boards and Touch Pads
- Frigidaire Washer Dispensers
- Frigidaire Washer Doors
- Frigidaire Washer Handles
- Frigidaire Washer Hardware
- Frigidaire Washer Hinges
- Frigidaire Washer Hoses and Tubes
- Frigidaire Washer Knobs
- Frigidaire Washer Latches
- Frigidaire Washer Motors
- Frigidaire Washer Pumps
- Frigidaire Washer Seals and Gaskets
- Frigidaire Washer Springs and Shock Absorbers
- Frigidaire Washer Switches
- Frigidaire Washer Timers
- Frigidaire Washer Valves
