Range Valves

Your Price

$75.91

LP Conversion Kit

★★★★★

6 Reviews

PartSelect Number PS3633782

Manufacturer Part Number GRLP4

The LP conversion kit is used in ranges

Installation Instructions

James from KENSINGTON, OH

BAD LIGHT SOCKET

Repaired under warranty Read more...

Your Price

$33.33

Burner Cap - 15K

★★★★★

19 Reviews

PartSelect Number PS954107

Manufacturer Part Number WB28K10222

This is a replacement burner cap for your gas range or cooktop. The burner cap is found on the burner head, and prevents debris from getting into the head when it is not in use. The cap is black in color and is sold individually. It is a little more than 4 inches in diameter. To replace the burner cap, simply remove the damaged cap, and replace it with the new one. No tools are required for this repair. This is an OEM part from the manufacturer.

Installation Instructions

Alejandro from Newark, NJ

The Burners and Burner Caps were missing

Very simple repair. I bought the Range without the Burners and Burner Caps. So all I had to do was to purchase the Burners and the Burner Caps and drop them in. Wish everything in life would be that simple. Read more...

Your Price

$29.09

Burner Cap - Black - Medium - 9500 BTU

★★★★★

16 Reviews

PartSelect Number PS954202

Manufacturer Part Number WB29K10023

This burner cap is for your gas range, and acts as a cover for the burner head. It is black in color and just over 3 inches in diameter. If your old burner cap is damaged or missing, this is the part that will replace it. This is an OEM part sourced directly from the manufacturer and is sold individually.

Installation Instructions

John from Simi Valley, CA

Missing burner head and all 4 caps on cook top.

All I needed to do was replace the missing burner head and caps. Cook top is now back in service. Thanks for getting me the parts in a very timely manor! Read more...

Your Price

$20.32

Burner Cap

★★★★★

22 Reviews

PartSelect Number PS954203

Manufacturer Part Number WB29K10024

This is a burner cap for your gas range. The cap acts as a cover for the burner head. If your old burner cap is damaged or missing, this is the part that will replace it. The cap is black in color and about 3 and a half inches in diameter. This is a quality OEM part sourced directly from the manufacturer. This cap is sold individually.

Installation Instructions

John from Simi Valley, CA

Missing burner head and all 4 caps on cook top.

All I needed to do was replace the missing burner head and caps. Cook top is now back in service. Thanks for getting me the parts in a very timely manor! Read more...

Your Price

$18.28

Burner Cap - 5000 BTU - Black

PartSelect Number PS954201

Manufacturer Part Number WB29K10022

This is a burner cap for your gas range. The cap is black in color and about 3 inches in diameter. The cap acts as a cover for the burner head. If your old burner cap is damaged or missing, this is the part that will replace it. This is a quality OEM part sourced directly from the manufacturer. This cap is sold individually.

Installation Instructions

John from Simi Valley, CA

Missing burner head and all 4 caps on cook top.

All I needed to do was replace the missing burner head and caps. Cook top is now back in service. Thanks for getting me the parts in a very timely manor! Read more...

Your Price

$36.67

Natural Gas to Liquid Propane Conversion Kit

★★★★★

7 Reviews

PartSelect Number PS2351422

Manufacturer Part Number GRLP3

This kit is used to convert your appliance to liquid propane.

Installation Instructions

Denny from Bishop, CA

Bought a new gas oven that did not come with a propane conversion kit.

I followed the simple instructions that were included in the kit. I started by replacing the 5 orifices on the top burners. The orifices are well labeled with numbers and colors. Next, I tightened the broiler burner orifice and the oven burner orifice with a 1/2 inch wrench. I had to tighten them pretty good to get the flame down where it is supposed to be. Then, I checked for leaks and I was then ready to cook. Read more...

Your Price

$92.81

Surface Burner Valve - 16K - Left Front & Right Front

★★★★★

18 Reviews

PartSelect Number PS11750353

Manufacturer Part Number WPW10206288

This is a surface burner valve for the left front and right front of your range. Burner valves are attached to the main gas line. When the switch is turned the gas then flows into a tube that mixes with air, creating the appropriate mixture for combustion. The valve monitors and controlsl the gas flow to the surface burner. It is roughly 3 inches long, 1.5 inches high, and about an inch wide. You should consider changing this part if your current one has seized and your range will not start.

Fixes these symptoms

Will Not Start
See more...

Installation Instructions

Steve from Tracy, CA

Burner valve was seized

Lock the oven/stove controls by holding the START button for five seconds. This shuts off gas to the valve. Remove the knobs from the front of the stove using philips screwdriver. Undo the six screws that hold on the front bezel and remove to find the valve. Unscrew the top bracket using philps screwdriver. disconnect the valve using a wrench (I think it was 12mm). Compare the valve to the new one. Installation is reverse. Press the START button for five seconds to unlock the oven/stove. Test fire the burner. Cook a batch of chili. Read more...

Your Price

$32.70

Burner Head - Medium - 9500

★★★★★

9 Reviews

PartSelect Number PS1020327

Manufacturer Part Number WB16K10055

This burner head, or surface burner, is used in ranges and ovens. The burner sends gas through the holes and slots to create an equal flame across the cooking area. If the gas igniter glows but will not light up, or there are heating inconsistencies, replacing the burner head could be the solution to your problem. No tools are required for this installation. To change the burner, first lift the grate and take the burner cap off. Next, lift the burner away from the cooktop. To set the new burner in place correctly, check the locating tab that fits into the V-shaped notch and make sure the igniter fits into the cut-out. Refer to the diagram provided by the manufacturer for further instructions.

Fixes these symptoms

Gas igniter glows, but will not light
Will Not Start
See more...

Installation Instructions

Alejandro from Newark, NJ

The Burners and Burner Caps were missing

Very simple repair. I bought the Range without the Burners and Burner Caps. So all I had to do was to purchase the Burners and the Burner Caps and drop them in. Wish everything in life would be that simple. Read more...

Your Price

$73.57

X-Large Burner Head with Electrode

★★★★★

11 Reviews

PartSelect Number PS2085280

Manufacturer Part Number 74007736

This is the burner head and electrode for your gas range. If your gas igniter glows but will not light, or if the element will not start or heat entirely, you may need to replace the burner head. This burner head is approximately 4¼ inches in diameter and is sold individually. Please note that the mounting screws for this burner head are sold separately. To replace the burner head, simply unscrew the old, defective burner head and screw in the new one.

Fixes these symptoms

Element will not heat
Gas igniter glows, but will not light
Will Not Start
See more...

Installation Instructions

Joe from Saratoga Springs, NY

electrode would not lite burner

Unscrewed burner head and replaced with new burnerhead and electrode. Just like new. Parts cost 128.00 including shipping. Very simple repair. Saved 200.00 in labor. Parts came within 36 hours. Super Fast. Read more...