Jenn-Air Range Valves
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Jenn-Air Range Valves
Your Price
$59.47
In Stock
Jenn-Air Range Lp Orifice
PartSelect Number PS12070661
Manufacturer Part Number W11087486
This LP orifice is for the bake and broil, 17K & 11K. The LP orifice helps control the gas that comes out of the burner tubes.
Installation Instructions
Andy from LOYALTON, CA
Natural Gas to Liquid Petrolium Conversion
The LP Conversion kit for the 5 surface burners that was supplied with the range are wrong. The oven and broiler orifice jets that came with the range were correct. Order the 5 surface jets to complete your LP conversion.
Read more...
Your Price
$55.29
In Stock
Jenn-Air Range Burner Head - 16k
PartSelect Number PS11754347
Manufacturer Part Number WPW10406878
This part distributes flame evenly to your cookware.
Installation Instructions
Charles from ATLANTA, GA
REPLACING burner head and ignitor
Remove the screw on the front of each side, also there are two screws holding the burner controls. Remove the burner knobs. There are two screws holding the burner head to the top of the burner panel, looking down on the burner head, these will not come out easily. Here's where the drill comes in. Drill the two screws head off, there are two gas line connections that must be removed, be careful not to twist the gas line. Remove the burner head and replace with the new one. When replacing the burner head, screw the gas line to the burner head first, then to the main gas control.
Read more...
Your Price
$47.40
In Stock
Jenn-Air Range Single Outlet Water Valve Kit
I read that this could be caused by a failure of the valve, even though the continuity test indicated that the solenoid was okay.
I ordered the part Friday afternoon. It was delivered Saturday. I did the repair in 10 minutes.
I pulled the fridge away from the wall.
I unplugged the fridge. I closed the water supply valve.
I unscrewed the two mounting screws using a flat head screwdriver.
I pulled the old valve out from refrigerator.
Using an adjustable wrench I detached the water supply from the valve. I detached the hose leading to the ice maker from the valve.
I pulled the electrical connectors from the connectors on the valve.
I attached the hoses to the new valve, attached the electrical connector, screwed the new valve in its place, opened the water supply, plugged the fridge back in, checked for leaks, and waited for a few hours.
My ice maker is working better than it has in at least two years. Read more...
PartSelect Number PS358631
Manufacturer Part Number 4318047
This part is a solenoid-operated switch located at the bottom of the refrigerator. When the water inlet valve is turned on, water is released from the supply line through the water valve and into the compact icemaker mold. The kit includes the mounting hardware and bracket plastic tubing fittings. The retaining nut must be cut off the plastic water line and gently pushed into the new valve. To remove, press down on the ring that the tube slides into. Refer to the installation instructions for further guidance. Please note: the manufacturer has redesigned this part and it can appear different than the original. It has a new quick connection.
Fixes these symptoms
- Ice maker not making ice
- Ice maker won’t dispense ice
- Leaking
- See more...
Installation Instructions
Kevin from Boston, MA
no water getting to ice maker
The ice maker had been slowly dying and one day just stopped making ice. No water was getting to the trays. I read that this could be caused by a failure of the valve, even though the continuity test indicated that the solenoid was okay.
I ordered the part Friday afternoon. It was delivered Saturday. I did the repair in 10 minutes.
I pulled the fridge away from the wall.
I unplugged the fridge. I closed the water supply valve.
I unscrewed the two mounting screws using a flat head screwdriver.
I pulled the old valve out from refrigerator.
Using an adjustable wrench I detached the water supply from the valve. I detached the hose leading to the ice maker from the valve.
I pulled the electrical connectors from the connectors on the valve.
I attached the hoses to the new valve, attached the electrical connector, screwed the new valve in its place, opened the water supply, plugged the fridge back in, checked for leaks, and waited for a few hours.
My ice maker is working better than it has in at least two years. Read more...
Your Price
$54.24
In Stock
Jenn-Air Range Burner Cap
PartSelect Number PS16731145
Manufacturer Part Number W11605759
This burner cap set is designed to restore proper function and appearance to a gas cooktop by replacing caps that are damaged, warped, or missing. The caps sit directly over the burner heads, helping stabilize the flame, promote even heat distribution, and protect internal components from spills and debris. Made from durable, high-heat-resistant material, they are built to withstand everyday cooking conditions. Installation is simple, as the caps typically set into place without tools, and replacement should always be done when the cooktop is cool. Depending on the appliance, the package may include a single cap or multiple caps, so it is recommended to confirm what is needed for your specific model.
Your Price
$69.91
In Stock
Jenn-Air Range Burner Head With Electrode - Small
PartSelect Number PS2085278
Manufacturer Part Number 74007734
This burner assembly is designed for a small burner on a gas range or cooktop and includes the burner head and spark electrode. The burner head directs gas through precision openings to create a steady, controllable flame, while the electrode ignites the gas for reliable operation. A worn or damaged assembly can cause issues such as weak flames, uneven heating, or failure to ignite. Replacing this part restores proper burner performance and ensures safe, efficient cooking. Installation is straightforward—remove the old assembly and secure the new one using existing hardware.
Fixes these symptoms
- Gas igniter glows, but will not light
- Will Not Start
- See more...
Installation Instructions
Michael from South Lake Tahoe, CA
BURNER KNOBS MELTED, Burned out electrode
R&R OLD knobs easy .R&R BURNER W/ ELECTRODE, UNSCREW LIFT OFF, UNPLUG SEECTRODE Reverse procedure easy
Read more...
Your Price
$62.60
In Stock
Jenn-Air Range Burner Cap - Left And Right Front
PartSelect Number PS11749752
Manufacturer Part Number WPW10183368
This burner cap sits on top of the burner base. Sold individually.
Installation Instructions
Barbara from PORTSMOUTH, VA
The stove was missing the left front right Cap Burner
I installed the Cap-Burner on the left front right, and then the gas ignited and I was able to use the stove.
Read more...
Your Price
$135.40
In Stock
Jenn-Air Range Regulator
PartSelect Number PS12070643
Manufacturer Part Number W11087445
Your Whirlpool blender or mixer plays an important role in your kitchen, right? So, when it stops working effectively, it?s a real hassle. Luckily, the Whirlpool Collar with Cutting Blade is here to get you back to blending and mixing smoothly. This part isn't just any replacement? it's a genuine OEM part. It's designed specifically for certain models of Whirlpool blenders and mixers (to check if yours is compatible, take a glance at your owner's manual before installing). The collar fits perfectly at the base of the container, functioning like a charm to blend or chop up your food just how you like it. But why is the collar so important? It's responsible for holding the cutter blade at the proper level. Without it, you can say goodbye to well-mixed smoothies, salsas, or cake batters. And no one wants that! Proudly living up to Whirlpool standards, this part promises performance, value, and style, meaning it?s not just practical?it?s going to look good in your appliance too. So, let's keep your kitchen running smoothly. Get back to making those perfect blends and mixtures with the Whirlpool Collar with Cutting Blade.
Installation Instructions
Josh from Yucaipa, CA
Bad regulator
We were building a house and had a very tight budget. We wanted our cabinets and granite to fit high end appliances so we wouldn't have to do a complete remodel to upgrade appliances. We got our appliances used but it good shape. We cleaned them up and replaced anything that looked worn. I saw our same appliances at the hardware store. The oven was $1800 and the range was $800. We paid $500 for both and around $100 in parts. The appliances work perfect and look brand new. No one knows they were used appliances and we got to spend the savings on the nicer granite!
Read more...
Your Price
$65.73
In Stock
Jenn-Air Range Lp Conversion Kit (surface Burner Orifices)
PartSelect Number PS11766764
Manufacturer Part Number W10909678
This genuine OEM liquid propane (LP) conversion kit, also known as a spud-orifice kit, includes the necessary orifices and fittings to safely convert a natural gas range to operate on liquid propane. Designed for precision and durability, it ensures proper gas flow and optimal performance after conversion. Professional installation is required, as improper setup can lead to fire or explosion hazards.
Your Price
$28.42
In Stock
Jenn-Air Range Burner Head 6k
PartSelect Number PS11754341
Manufacturer Part Number WPW10406243
This is the Right Rear Burner Head.
Installation Instructions
Charles from ATLANTA, GA
REPLACING burner head and ignitor
Remove the screw on the front of each side, also there are two screws holding the burner controls. Remove the burner knobs. There are two screws holding the burner head to the top of the burner panel, looking down on the burner head, these will not come out easily. Here's where the drill comes in. Drill the two screws head off, there are two gas line connections that must be removed, be careful not to twist the gas line. Remove the burner head and replace with the new one. When replacing the burner head, screw the gas line to the burner head first, then to the main gas control.
Read more...
Your Price
$48.45
In Stock
Jenn-Air Range Burner Head 12k
PartSelect Number PS11754345
Manufacturer Part Number WPW10406797
This part distributes flame evenly to your cookware.
Installation Instructions
Charles from ATLANTA, GA
REPLACING burner head and ignitor
Remove the screw on the front of each side, also there are two screws holding the burner controls. Remove the burner knobs. There are two screws holding the burner head to the top of the burner panel, looking down on the burner head, these will not come out easily. Here's where the drill comes in. Drill the two screws head off, there are two gas line connections that must be removed, be careful not to twist the gas line. Remove the burner head and replace with the new one. When replacing the burner head, screw the gas line to the burner head first, then to the main gas control.
Read more...
Related Jenn-Air Range Parts
- All Jenn-Air Range parts
- Jenn-Air Range Brackets and Flanges
- Jenn-Air Range Caps and Lids
- Jenn-Air Range Circuit Boards and Touch Pads
- Jenn-Air Range Cooktops
- Jenn-Air Range Doors
- Jenn-Air Range Drawers and Glides
- Jenn-Air Range Drip Bowls
- Jenn-Air Range Ducts and Vents
- Jenn-Air Range Elements and Burners
- Jenn-Air Range Fans and Blowers
- Jenn-Air Range Fuses
- Jenn-Air Range Grates
- Jenn-Air Range Handles
- Jenn-Air Range Hardware
- Jenn-Air Range Hinges
- Jenn-Air Range Igniters
- Jenn-Air Range Ignitions
- Jenn-Air Range Insulations
- Jenn-Air Range Knobs
- Jenn-Air Range Legs and Feet
- Jenn-Air Range Lights and Bulbs
- Jenn-Air Range Motors
- Jenn-Air Range Panels
- Jenn-Air Range Racks
- Jenn-Air Range Seals and Gaskets
- Jenn-Air Range Sensors
- Jenn-Air Range Switches
- Jenn-Air Range Trims
- Jenn-Air Range Wire Plugs and Connectors