My Orders
Jenn-Air Range Cooktops
GET YOUR OFFICIAL Jenn-Air PARTS TO ENSURE VICTORY
Popular Jenn-Air Range Cooktops
Upgrade your cooktop with this easy-to-install electric coil cartridge, perfect for replacing worn-out burners and restoring consistent heat. The sleek stainless steel housing holds two coil burners—one large (2100W) and one small (1250W)—giving you the flexibility to cook everything from quick breakfasts to hearty dinners. Compatible with a variety of ranges, this module is a simple way to refresh your kitchen setup. Sold as a single unit.
Upgrade your cooktop with this easy-to-install electric coil cartridge, perfect for replacing worn-out burners and restoring consistent heat. The sleek stainless steel housing holds two coil burners—one large (2100W) and one small (1250W)—giving you the flexibility to cook everything from quick breakfasts to hearty dinners. Compatible with a variety of ranges, this module is a simple way to refresh your kitchen setup. Sold as a single unit.
Installation Instructions
Laurel from Houma, LA
I have a 26 year old stove top and the electric coils heated intermittantly. I got tired of banging on them to get them to work. I went to various local stores ( Lowe's, appliance stores) and the parts would have been twice the cost and taken a while to come in. I then googled your site and found
I popped out the old burner cartridges and gladly threw them away and popped in the new ones. They work great and no banging! I changed out the old grease filter in the down draft and put the new grill grate on top of the grill in seconds. The timer knob fit well but the burner knobs did not so I had to return those. My "new" stove to
... Read more
p looks basically the same except new. The grill grate being black updates the look somewhat. The best thing is that the burners work. Thanks for everything.
Read less
This stove cartridge assembly, also known as a cooktop module, is a manufacturer-approved replacement part for your stove. It is black in color and comes complete with burner elements. Make sure to shut off power to the unit before replacing this part.
This stove cartridge assembly, also known as a cooktop module, is a manufacturer-approved replacement part for your stove. It is black in color and comes complete with burner elements. Make sure to shut off power to the unit before replacing this part.
Installation Instructions
John from Corfu, NY
Old element was worn out (burst in line)
First, I cut the power to the stove to be sure no electrical current could be conducted. Next, I removed the two screws that hold the heating element to the back of the stove. Then, I removed the oven racks and slowly slid the heating element out until I could see the wires that attached to it. Because the element has the female end o
... Read more
f the wire, I pulled the male ends out of both the left and right side of the element.. This releases the old element and I discarded it. Next, I took the new element, slide the male ends into the new female ends that protruded from both the right and left side of the element. I crimped these slightly with my pliers to make sure that they would stay secure when I pushed the element into place. With the new element securely attached, I slowly slid the element into place, this forces the exposed wires to be retracted out of sight and in the insulated part of the oven. I then took the two screws that I had to removed in the beginning, and used them to fasten this new heating element to the back of the oven. Finally, I turned the power back on and the element worked fine.
Read less
This cooktop burner module assembly is designed to replace two burners on compatible ranges, offering a reliable and efficient cooking solution. Housed in a sleek black frame, it contains the necessary heating elements for everyday use. Measuring approximately 24 inches long, 5.5 inches wide, and 14.5 inches high, it installs easily into your existing cooktop setup. Ideal for restoring performance when burners are no longer functioning properly. Designer Line.
This cooktop burner module assembly is designed to replace two burners on compatible ranges, offering a reliable and efficient cooking solution. Housed in a sleek black frame, it contains the necessary heating elements for everyday use. Measuring approximately 24 inches long, 5.5 inches wide, and 14.5 inches high, it installs easily into your existing cooktop setup. Ideal for restoring performance when burners are no longer functioning properly. Designer Line.
Installation Instructions
Elroy from Golden Valley, AZ
the glass burner top was broke
Unplug old burner assembly and plug in new one
This black Cooktop is an OEM part for some Whirlpool ranges. It serves as the flat surface where cooking is done by using burners or a warming element. The glass-ceramic or stainless steel cooktop provides an attractive and durable cooking area.
This black Cooktop is an OEM part for some Whirlpool ranges. It serves as the flat surface where cooking is done by using burners or a warming element. The glass-ceramic or stainless steel cooktop provides an attractive and durable cooking area.
This sealed-burner gas range cooktop provides a smooth, durable cooking surface designed to contain spills and support grates and burner caps for optimal performance. Its sealed design helps protect internal components while maintaining proper flame patterns for efficient cooking. Ideal for replacing cracked, chipped, or warped tops, this component restores both the appearance and functionality of your range. Installation typically involves removing the old cooktop and securing the new one in place, and professional assistance is recommended for proper fit and safety.
This sealed-burner gas range cooktop provides a smooth, durable cooking surface designed to contain spills and support grates and burner caps for optimal performance. Its sealed design helps protect internal components while maintaining proper flame patterns for efficient cooking. Ideal for replacing cracked, chipped, or warped tops, this component restores both the appearance and functionality of your range. Installation typically involves removing the old cooktop and securing the new one in place, and professional assistance is recommended for proper fit and safety.
Installation Instructions
David from MECHANICSVLLE, MD
Replaced old Jenn Air cook top base
Prepare a flat area with newspaper, a screwdriver, and a small bowl for the screws, and a small wire brush (if you want to clean as you go). I also recommend taking photos as you proceed, for reference.
ALSO, take close note of the orientation of the cook top base, one end has a lip that's allows for burner assembly removal. ... Read more
Remove entire two burner assembly, place upside down on newspaper, remove seven Phillips screws, remove assembly bottom.
Remove small screws from gas tubes, pay close attention as you remove the gas tube from the bottom of the burner, to the orientation of the two washers (the washers have an edge).
Remove the burner tubes and washers.
Carefully remove the igniter connectors from igniter.
Remove the end of the assembly.
Grasp the burners, and turn to rotate the burner to a position where the "bumps" on the burner match up with the gaps in the burner cook base. Remove the burners.
The old burner base can be set to the side. At this time i cleaned the burners throughly with a small toothbrush size wire brush.
Assemble the burners to the new top base by aligning the bumps to the opening in the cook top base, turn slightly to keep burner in place. Insert the gas tubes, with the washers (be careful about the washer lip orientation) with the smaller screws, do not overtighten!
Attach the igniter connector to the igniters.
Align the burner/gas tubes with the assembly end. Carefully set the base into place, adjust the tubes as necessary to get the screws aligned with the holes. Install the screws, tighten hand tight.
Install entire assembly into cook top, check igniter and burner operation.
Glass cleaner is great for cleaning the new porcelain surface.
ALSO, take close note of the orientation of the cook top base, one end has a lip that's allows for burner assembly removal. ... Read more
Remove entire two burner assembly, place upside down on newspaper, remove seven Phillips screws, remove assembly bottom.
Remove small screws from gas tubes, pay close attention as you remove the gas tube from the bottom of the burner, to the orientation of the two washers (the washers have an edge).
Remove the burner tubes and washers.
Carefully remove the igniter connectors from igniter.
Remove the end of the assembly.
Grasp the burners, and turn to rotate the burner to a position where the "bumps" on the burner match up with the gaps in the burner cook base. Remove the burners.
The old burner base can be set to the side. At this time i cleaned the burners throughly with a small toothbrush size wire brush.
Assemble the burners to the new top base by aligning the bumps to the opening in the cook top base, turn slightly to keep burner in place. Insert the gas tubes, with the washers (be careful about the washer lip orientation) with the smaller screws, do not overtighten!
Attach the igniter connector to the igniters.
Align the burner/gas tubes with the assembly end. Carefully set the base into place, adjust the tubes as necessary to get the screws aligned with the holes. Install the screws, tighten hand tight.
Install entire assembly into cook top, check igniter and burner operation.
Glass cleaner is great for cleaning the new porcelain surface.
Read less
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
This is just the top portion of the cartridge. All other parts sold separately.
This is just the top portion of the cartridge. All other parts sold separately.
Installation Instructions
Judy from Florence, AL
i needed a new top for my jenair
i just ordered the part and replaced it with stainless steel. i am so glad the saleslady told me about it. my stove looks brand new. my drip pans look so nice with my new cover.
This is just the black glass top - it does not include any other parts.
This is just the black glass top - it does not include any other parts.
Installation Instructions
Mark A. from Paulsbo, WA
Mother-in-law dropped a pan on the ceramic glass top
Turn off the circuit breaker to the oven and put tape over the switch of the circuit breaker so your mother-in-law won't accidently turn it on. Removed the bottom false tray and disconnected the down draft flex hose. Pulled the oven out from the center island. Removed all of the top phillip screws, marked a zip lock bag for each differe
... Read more
nt type of screws. Laid a telephone book and a towell on the top shelf of the oven. Removed the broken glass and carefully laid the new glass in place and reconnected the screws and put the oven back in place and reconnected the flex hose for the down draft. Make notes in disconnecting and reconnecting the front knobs and face plate to the stove (let the wires hang with the front plate) along with some side plates.
Read less
