My Orders
Jenn-Air Range Ignitions
GET YOUR OFFICIAL Jenn-Air PARTS TO ENSURE VICTORY
Popular Jenn-Air Range Ignitions
This part may differ in appearance, but functions same as original part. : This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
This part may differ in appearance, but functions same as original part. : This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
What this part fixes:
- Element will not heat
- Gas igniter glows, but will not light
- Will Not Start
Installation Instructions
jonathan from Bryson City, NC
No spark at top burners, first one then eventually all 4.
Most of the repair time was spent researching the problem online, locating the spark module inside the range, and selecting the part online. Installation was easy. Key troubleshooting info for me was, if there is no clicking, the spark unit is probably worn-out. I traced the ignition wires from the burners down to the spark module, locate
... Read more
d inside a 2x3" metal housing next to the bottom drawer. I removed 2 screws and out it came. The replacement unit pictured on the PartSelect site was not identical to the original but had the same number of contacts. I ordered the part and it arrived a few days later. The old connectors slipped easily onto the new pins, and I screwed the new unit into the range using the new metal housing. All 4 burners now spark up quickly, and we saved at least $100 on a service call. It was well worth the time and effort -- thanks!
Read less
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
What this part fixes:
- Element will not heat
- Gas igniter glows, but will not light
- Will Not Start
Installation Instructions
scott from centreville, VA
top burners on stove won't ignite ,no clicking noise
remove small panel on right side of stove,then un clip moduke and put wires from old module to new one.
Exact fit nomproblems.
Exact fit nomproblems.
Sold individually. This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
Sold individually. This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
Installation Instructions
John from Lewes, DE
No spark to large burner
Switched spark module from one of the other burners to see if it would work and it did (presto)process of elimination and being in the propane business for 32 years helped
This spark module is designed to ignite the gas burners on a range or cooktop, delivering a precise electric spark for reliable ignition. It restores proper functionality when burners fail to start, light inconsistently, or produce insufficient heat. Engineered for durability, this component ensures safe and efficient operation. Installation requires disconnecting power, removing the old module, and securing the new one using existing connections. A dependable solution for maintaining optimal performance in your gas range.
This spark module is designed to ignite the gas burners on a range or cooktop, delivering a precise electric spark for reliable ignition. It restores proper functionality when burners fail to start, light inconsistently, or produce insufficient heat. Engineered for durability, this component ensures safe and efficient operation. Installation requires disconnecting power, removing the old module, and securing the new one using existing connections. A dependable solution for maintaining optimal performance in your gas range.
This is the part that substitutes for the spark module and also the transformer. It is now all in one board.
This is the part that substitutes for the spark module and also the transformer. It is now all in one board.
Installation Instructions
HERBERT from ISELIN, NJ
stove will not start no spark or gas
part did not fix the problem, may be gas regulater ,well if you are changing this part,not to bad .remove the knobs bottom screws and two side screws front cover flips up and off ,the ignition control is in front of you right side ,remove the one screw that is looking at and everything slides out .i turned off the gas and elec and removed
... Read more
the gas line and carefully laid the stove on it back.made it easier ,good luck
Read less
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
This is a 4-point re-ignition spark module. NOTE: This part has been redesigned by the manufacture, it may appear different but will still function the same.
This is a 4-point re-ignition spark module. NOTE: This part has been redesigned by the manufacture, it may appear different but will still function the same.
Installation Instructions
Robert from Ranchos de Taos, NM
Burners kept clicking after ignited
This problem was driving me crazy for months. Of course, after I bought and installed the part and it still was not fixed I finally found a website that told me how to fix the clicking. The problem is that the removable head burners (#8 on the top assembly diagram) are not making good electrical contact with the base burners (#22). What I
... Read more
did was grab the head burners and grind them back and forth into the base burners with the weight on the heal of my hand. Steel wool or sandpaper would work too--you just want to clean the surfaces to restore electrical contact.
If you still want to know how to replace the spark module start by removing #24. This will allow the removal of #9 (after you take the knobs off). You may have to do some fiddling cause the rubber gasket is sticky. Next there are 2 obvious regular screws for #14 and 2 not so obvious star screws in the space where the burner valves are. After #14 is off there are 2 screws on the spark module to be removed and one that you can't loosen that is in a slot. You wriggle the module out of that one.
If you still want to know how to replace the spark module start by removing #24. This will allow the removal of #9 (after you take the knobs off). You may have to do some fiddling cause the rubber gasket is sticky. Next there are 2 obvious regular screws for #14 and 2 not so obvious star screws in the space where the burner valves are. After #14 is off there are 2 screws on the spark module to be removed and one that you can't loosen that is in a slot. You wriggle the module out of that one.
Read less
This spark module is for ranges.
Spark module controls the spark for lighting the range's surface burners.
Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.
This spark module is for ranges.
Spark module controls the spark for lighting the range's surface burners.
Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.
The oven burner spark module ignites an oven burner.
The oven burner spark module ignites an oven burner.
This spark module is an essential component for gas ranges, responsible for generating the high-voltage spark that ignites the surface burners. It ensures reliable ignition when you turn the control knob and helps maintain smooth operation of your cooktop. A failing spark module can cause issues such as burners not lighting, intermittent ignition, or a persistent clicking sound from the igniters.
This spark module is an essential component for gas ranges, responsible for generating the high-voltage spark that ignites the surface burners. It ensures reliable ignition when you turn the control knob and helps maintain smooth operation of your cooktop. A failing spark module can cause issues such as burners not lighting, intermittent ignition, or a persistent clicking sound from the igniters.