Frigidaire Range Valves

Frigidaire Appliance Parts
Shop By Part Type

Popular Frigidaire Range Valves

Your Price
$45.15
  In Stock
LP Conversion Kit
★★★★★
★★★★★
(2)
PartSelect Number PS3633782
Manufacturer Part Number GRLP4
The LP conversion kit is used in ranges
Installation Instructions
James from KENSINGTON, OH
BAD LIGHT SOCKET
Repaired under warranty Read more...
Your Price
$34.81
  In Stock
Natural Gas to Liquid Propane Conversion Kit
★★★★★
★★★★★
(7)
PartSelect Number PS2351422
Manufacturer Part Number GRLP3
This kit is used to convert your appliance to liquid propane.
Installation Instructions
Denny from Bishop, CA
Bought a new gas oven that did not come with a propane conversion kit.
I followed the simple instructions that were included in the kit. I started by replacing the 5 orifices on the top burners. The orifices are well labeled with numbers and colors. Next, I tightened the broiler burner orifice and the oven burner orifice with a 1/2 inch wrench. I had to tighten them pretty good to get the flame down where it is supposed to be. Then, I checked for leaks and I was then ready to cook. Read more...
Your Price
$17.92
  In Stock
Left Front Orifice - 9.5K
★★★★★
★★★★★
(2)
PartSelect Number PS2332664
Manufacturer Part Number 316527500
Your Price
$22.93
  In Stock
Right Rear Orifice
★★★★★
★★★★★
(1)
PartSelect Number PS2349573
Manufacturer Part Number 316527504
Your Price
$64.44
  In Stock
Front Burner Igniter/Orifice Assembly
★★★★★
★★★★★
(3)
PartSelect Number PS2332312
Manufacturer Part Number 316237805
This igniter and orifice assembly is a legitimate OEM replacement part for your gas stove, and includes the igniter, orifice assembly, and gas tube. This part may need replacing if the igniter fails or the tube is leaking gas. It is a very easy repair. Remove the grates and burners from the range. Unscrew the existing assemblies and pry off the cooktop. Locate the assembly you are replacing and undo the nut holding it in place. Pull out the igniter wire by hand, and install the new one, replacing the rest of the parts in reverse order.
Fixes these symptoms
  • Element will not heat
  • Gas igniter glows, but will not light
  • Will Not Start
  • See more...
Installation Instructions
Steve from NORTH PEKIN, IL
the new burners had no threads for the screws
had to use a tap and cut new threads. Also had to remove the top of the range, and the metal cover under the top. Read more...
Your Price
$39.35
  In Stock
Medium Burner Cap - Black - 9.5k
★★★★★
★★★★★
(1)
PartSelect Number PS439750
Manufacturer Part Number 316213500
Your Price
$73.18
  In Stock
Front Burner
★★★★★
★★★★★
(4)
PartSelect Number PS11770472
Manufacturer Part Number 5304506427
This is a front burner assembly for the stovetop on your range. It delivers the gas to the main cooking area by dividing it through the slots or holes in order to create an evenly burning flame. Take note that this is a front burner assembly. If you are looking to replace your rear burner assembly, see that in the related parts section. This model is roughly 8 inches long, 4 inches wide, and 4 inches thick.
Installation Instructions
PATRICIA from OPA-LOCKA, FL
One of the two front burners was broken and the second was leaking gas.
Unplug the old ones and the new ones snapped into place. Read more...
Your Price
$21.54
  In Stock
Surface Burner Orifice
PartSelect Number PS2364100
Manufacturer Part Number 316527509
Sold individually.
Your Price
$63.74
  In Stock
Sealed Burner Head - 14k
★★★★★
★★★★★
(2)
PartSelect Number PS820297
Manufacturer Part Number 316223400
Fixes these symptoms
  • Gas igniter glows, but will not light
  • Will Not Start
  • See more...
Installation Instructions
Roland from Auburn, ME
The burner would not light by itself, and the flame was lopsided.
The repair was nothing, but the diagnosis was a bit tricky. After carefully looking at the burner head, (cast aluminum) I pretty much figured out that the 4 small cast aluminum bumps that keep the burner cap positioned up in the air the correct amount to allow gas to flow under the cap, were worn down, preventing the gas from exiting properly by the igniter. My guess was correct. The new burner head solved all my problems. I love Parts Select for the ease of finding the correct parts and how fast they ship their orders. Great company, great service. Keep up the good work Read more...
Your Price
$147.99
  Special Order
Front Burner Igniter/Orifice Assembly - 14K
PartSelect Number PS899768
Manufacturer Part Number 316272000
Installation Instructions
Terry from Acton, MA
Right front ignitor would not light
Removed grates and range cover, unscrewed all sheet metal screws and removed cover plate. Disconnect electrical connector and then removed old ignitor/orifice ass and replaced it with the new one. Replaced all screws in cover plate and then reattached range cover and grates. Turned on the gas and it lit after a few sparks took place. Read more...

Related Parts