Frigidaire Range Seals and Gaskets

Videos!

Your Price

$108.68

Frigidaire Range Oven Door Seal with Clips

★★★★★

3 Reviews

PartSelect Number PS440011

Manufacturer Part Number 316239700

Also known as gasket.

Installation Instructions

CHERYL from PERRYVILLE, AR

Gasket missing

I took the brads that were left from the old gasket off with needle nose pliers. Then I put the new one on. It was very easy. Read more...

Your Price

$79.60

Frigidaire Range SEAL

PartSelect Number PS11700217

Manufacturer Part Number 5304498835

Installation Instructions

Connie from CANYON LAKE, TX

The seal around the oven door had frayed on the end and come loose.

We carefully pulled the old seal out of the door ( staples hold it in place).Then took the replacement and laid it around the door. Starting at one side we adjusted the seal and pushed the staples into place. Making sure we folded the ends, we used a spoon to push them into the slots. Read more...

Your Price

$24.29

Frigidaire Range Burner Pan Gasket

PartSelect Number PS442167

Manufacturer Part Number 318053901

Your Price

$110.59

Frigidaire Range GASKET

★★★★★

3 Reviews

PartSelect Number PS442156

Manufacturer Part Number 318053103

This oven door gasket prevents heat from escaping the oven cavity when in use. It contains all of the attaching clips needed for installation.

Installation Instructions

Vicki from Warrenton, MO

the gasket around the oven door was severly scorced and hard. Would no longer seal door.

Easier than painting my toenails!! The gasket came out easily just by pulling with my hands. Replacing it with the new one was even simpler. The clips are already attached to the gasket and easily slip into the holes on the door. I used the end of a tupperware orange peeler to push the unfinished ends of the gasket into a slot at the bottom and that was it! A new, perfect seal and it looks and works great! Read more...

Videos!

38% OFF

Your Price

$89.10

$143.25

Frigidaire Range Door Seal

PartSelect Number PS977704

Manufacturer Part Number 316405000

Installation Instructions

Frank from PALM COAST, FL

My oven door seal was worn and did not seat properly. It leaked heat.The infinite burner was not warming in the low heat positions

I followed two very good videos on how to do the repairs. It took longer to clean all the disassembled parts and the glass than it did to actually do the repair.
A word of caution: Be sure to lock the door hinges in the open position before you lift out the door. They must be locked open to put the door back on. It's difficult to lock them open once the door is removed. Also when you replace the screws get them all aligned in the holes before you lock everything down.
The infinite burner switch was pretty easy to replace but watch out for sheet metal cuts when you are removing the back of the stove. I recommend gloves. My stove has a 12 inch infinite burner, but the parts list only mentions a 10 inch burner. Before I ordered it, I had to call the company to verify that it could be used for the 12 inch burner as well. Read more...