My Orders
Frigidaire Range Caps and Lids
GET YOUR OFFICIAL Frigidaire PARTS TO ENSURE VICTORY
Popular Frigidaire Range Caps and Lids
The surface Meduim 9.5K burner cap is located on the top of the burner head and is used in ranges and ovens. The burner cap helps spread out the burner flame for even heating, and protects the burner head from cooking spills. Without the cap you can have a burning gas torch. If your cap is missing or is discolored, replacing this part can solve the issue. This part comes in the color black. Remember to unplug your range from the power source and allow surface to cool before installing this part. Refer to the manual provided by the manufacturer for further installation instructions.
The surface Meduim 9.5K burner cap is located on the top of the burner head and is used in ranges and ovens. The burner cap helps spread out the burner flame for even heating, and protects the burner head from cooking spills. Without the cap you can have a burning gas torch. If your cap is missing or is discolored, replacing this part can solve the issue. This part comes in the color black. Remember to unplug your range from the power source and allow surface to cool before installing this part. Refer to the manual provided by the manufacturer for further installation instructions.
This OEM waveguide cover in your microwave is a heat-resistant component that prevents food, grease, and moisture from entering the waveguide. It is typically located on the side or top wall of the cooking chamber. If the cover is broken, you may notice cracks, charring, or burns, and potentially see arcing or sparks during operation. Not replacing a damaged cover can lead to short circuits and the risk of electrical components touching your food. To remove the cover, start by disconnecting the microwave from its power source before opening its door. The waveguide cover is slotted or snapped into place, so gently slide or apply pressure to release it from the clips or slots. Please note that the cover is sold individually.
This OEM waveguide cover in your microwave is a heat-resistant component that prevents food, grease, and moisture from entering the waveguide. It is typically located on the side or top wall of the cooking chamber. If the cover is broken, you may notice cracks, charring, or burns, and potentially see arcing or sparks during operation. Not replacing a damaged cover can lead to short circuits and the risk of electrical components touching your food. To remove the cover, start by disconnecting the microwave from its power source before opening its door. The waveguide cover is slotted or snapped into place, so gently slide or apply pressure to release it from the clips or slots. Please note that the cover is sold individually.
Installation Instructions
Christopher from CARY, NC
Cover needs replacing
You have to be very careful because the wave guide cover is very brittle. It needs to be bent very gently in order to fit the four ends into each slot. I would highly recommend buying two just in case the first one breaks.
Sold individually. This part helps the flame to spread for even heat. Also protects your burner head from spills.
Sold individually. This part helps the flame to spread for even heat. Also protects your burner head from spills.
This black burner cap is a genuine OEM part made of a durable material capable of reaching 14,000-BTU, with an approximately 3-inch diameter. It is compatible with various models of ranges and cooktops, where it helps to distribute heat evenly and protects the burner assembly from thermal damage. Since this cap is sold as an individual part, consider how many caps you need to replace on your stovetop before ordering. Burner caps often need to be replaced if they are damaged or worn, no longer providing even heat distribution, or if they simply no longer look good. To replace this cap, make sure the stovetop is cool, and then simply lift any necessary grates to get access to the cap. Then lift and swap out the old cap for the new one, making sure it is settled properly on the burner before you reseat the grate(s).
This black burner cap is a genuine OEM part made of a durable material capable of reaching 14,000-BTU, with an approximately 3-inch diameter. It is compatible with various models of ranges and cooktops, where it helps to distribute heat evenly and protects the burner assembly from thermal damage. Since this cap is sold as an individual part, consider how many caps you need to replace on your stovetop before ordering. Burner caps often need to be replaced if they are damaged or worn, no longer providing even heat distribution, or if they simply no longer look good. To replace this cap, make sure the stovetop is cool, and then simply lift any necessary grates to get access to the cap. Then lift and swap out the old cap for the new one, making sure it is settled properly on the burner before you reseat the grate(s).
A cracked or warped burner cap can interfere with flame shape and cooking performance. This replacement sits on the burner head, helping distribute the flame evenly while protecting the openings below from spills. Check for food buildup, blocked ports, moisture, and incorrect cap placement before deciding a replacement is needed. Verify fit using the complete appliance model because burner caps may look alike but differ in size or output. Turn every control off and wait until the cooktop is completely cool before installation. Place the clean, dry cap flat over the correct burner. Stop using the appliance if you smell unburned gas.
A cracked or warped burner cap can interfere with flame shape and cooking performance. This replacement sits on the burner head, helping distribute the flame evenly while protecting the openings below from spills. Check for food buildup, blocked ports, moisture, and incorrect cap placement before deciding a replacement is needed. Verify fit using the complete appliance model because burner caps may look alike but differ in size or output. Turn every control off and wait until the cooktop is completely cool before installation. Place the clean, dry cap flat over the correct burner. Stop using the appliance if you smell unburned gas.
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
This genuine OEM large surface burner cap is designed to sit securely over the burner head, helping distribute the gas flame evenly for consistent cooking results. Finished in durable black, it also protects the burner components from spills and debris during use. Ideal for replacing a worn or damaged cap, it helps restore proper flame performance and safe, reliable operation of your cooktop.
This genuine OEM large surface burner cap is designed to sit securely over the burner head, helping distribute the gas flame evenly for consistent cooking results. Finished in durable black, it also protects the burner components from spills and debris during use. Ideal for replacing a worn or damaged cap, it helps restore proper flame performance and safe, reliable operation of your cooktop.
This part goes over the top of the oven door glass. The door handle also attaches to the door cap.
This part goes over the top of the oven door glass. The door handle also attaches to the door cap.
Installation Instructions
Barbara from Lagrange, IN
oven door would not stay closed tightly lost of heat
I replaced the door hinges and put a new handle on the oven door. I can not remember what was done exactly because I had a 2 and 4 yr old helping me. But I can tell you that the instructions included with the kit made the job easy. There were a few problems with the type of bit used to get the screws off (I needed a star type of bit, b
... Read more
ut used my phillips because that's what I had on hand). It worked fine, but it would have been better with the star tip screwdriver. There were helpfull hints that told me to prethread the new screws going into the oven door and frame. That was a big help instead of trying to hold the part and start the self threading screws. All in all I would order the parts again and attempt to do another repair on my oven, because it saved me a lot of money. Good luck to all the other first time repairers out there.
Read less
This cap is a small but essential component used to seal, cover, or protect an opening within an appliance. It helps maintain proper function by preventing leaks, contamination, or exposure of internal parts.
This cap is a small but essential component used to seal, cover, or protect an opening within an appliance. It helps maintain proper function by preventing leaks, contamination, or exposure of internal parts.
This genuine OEM brass surface burner cap is designed to sit securely over the burner head, helping distribute heat evenly for consistent cooking results. Made from durable brass, it withstands high temperatures while protecting internal burner components from spills and debris. Ideal for replacing a worn or damaged cap, it helps restore proper flame performance and reliable operation on your cooktop.
This genuine OEM brass surface burner cap is designed to sit securely over the burner head, helping distribute heat evenly for consistent cooking results. Made from durable brass, it withstands high temperatures while protecting internal burner components from spills and debris. Ideal for replacing a worn or damaged cap, it helps restore proper flame performance and reliable operation on your cooktop.