My Orders
Gibson Range Valves
GET YOUR OFFICIAL Gibson PARTS TO ENSURE VICTORY
Popular Gibson Range Valves
This safety valve ensures that no gas is released until the igniter has received the proper voltage needed to ignite the gas range.
This safety valve ensures that no gas is released until the igniter has received the proper voltage needed to ignite the gas range.
Installation Instructions
Ed from Darby, PA
Safety valve would not open
I am an HVAC tech by trade so it wasn't difficult to diagnose problem with safety valve. The hard part was being without an oven for a week. Repair was simple and effective--oven works good as new.
Shut off gas and unplugged oven. Removed floor of oven between broiler and bake section, used wrenches to disconnect gas line from saf ... Read more ety valve in back of oven, used philipps head screwdriver to remove burner assembly and gas valve, reversed process to replace. Checked out operation--OK.
Shut off gas and unplugged oven. Removed floor of oven between broiler and bake section, used wrenches to disconnect gas line from saf ... Read more ety valve in back of oven, used philipps head screwdriver to remove burner assembly and gas valve, reversed process to replace. Checked out operation--OK.
Read less
This is a genuine use wci regulator, which works with ranges.
This is a genuine use wci regulator, which works with ranges.
Installation Instructions
Howard from Lynden, WA
Gas smell and test positive
Pulled gas pressure regulator and used OEM replacement part from this site Fit like a glove.
This valve automatically cuts off the flow of gas at a certain pressure.
This valve automatically cuts off the flow of gas at a certain pressure.
What this part fixes:
- Gas igniter glows, but will not light
- Gas smell
- Little to no heat when baking
Installation Instructions
Albern from Bainbridge IS., WA
Regulator had propane leak past diaphragm
removed two screws disconnected inlet pipe and two outlet pipes, removed regulator. Replaced with new regulator. performed leak Test.
This gas range rear burner assembly delivers a steady and even flame for cooking, helping ensure consistent heat performance on your cooktop. Designed to mount directly to the stovetop surface, it supports reliable ignition and proper gas flow. Replacing a worn or damaged burner can resolve issues such as uneven heating, weak flames, or ignition failure, restoring smooth operation.
This gas range rear burner assembly delivers a steady and even flame for cooking, helping ensure consistent heat performance on your cooktop. Designed to mount directly to the stovetop surface, it supports reliable ignition and proper gas flow. Replacing a worn or damaged burner can resolve issues such as uneven heating, weak flames, or ignition failure, restoring smooth operation.
Installation Instructions
LETICIA from South El Monte, CA
Back & front burners where broken and did not stay in place, Unable to use in regular cooking.
I looked in PARTS SELECT.COM immense inventory of replacements parts, found the right ones, order them, got in with in two days, replaced the old ones with the new parts, Now we are cooking!! Thank you.
This is a front burner assembly for the stovetop on your range. It delivers the gas to the main cooking area by dividing it through the slots or holes in order to create an evenly burning flame. Take note that this is a front burner assembly. If you are looking to replace your rear burner assembly, see that in the related parts section. This model is roughly 8 inches long, 4 inches wide, and 4 inches thick.
This is a front burner assembly for the stovetop on your range. It delivers the gas to the main cooking area by dividing it through the slots or holes in order to create an evenly burning flame. Take note that this is a front burner assembly. If you are looking to replace your rear burner assembly, see that in the related parts section. This model is roughly 8 inches long, 4 inches wide, and 4 inches thick.
Installation Instructions
PATRICIA from OPA-LOCKA, FL
One of the two front burners was broken and the second was leaking gas.
Unplug the old ones and the new ones snapped into place.
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
Used for both bake and broil.
This part makes sure that no gas is released until the igniter gets enough power to ignite the gas range.
Used for both bake and broil.
This part makes sure that no gas is released until the igniter gets enough power to ignite the gas range.
What this part fixes:
- Gas igniter glows, but will not light
- Little to no heat when baking
***No Conversion Kit Required - Adjust On Appliance***
This valve automatically cuts off the flow of a liquid or gas when it reaches a certain pressure.
***No Conversion Kit Required - Adjust On Appliance***
This valve automatically cuts off the flow of a liquid or gas when it reaches a certain pressure.
Installation Instructions
Eloise from Indianapolis, IN
burner cap missing
ordered received and placed it on the stove!! it was that easy!
