Gibson Range Hinges

Your Price

$58.49

Hinge - Right Side

★★★★★

(3)

PartSelect Number PS1151517

Manufacturer Part Number 318348800

Fixes these symptoms

Door won’t close
See more...

Installation Instructions

Xavier from Rocky Point, NY

Springs pooped off door hinges, causing hinges to break through door face

Remove decorative side panels on stove to expose backside of hinge and springs;
remove door;
remove old hardware;
since hinge openings were bent, straighten hinge opening in oven face;
attach spring to inside of oven;
slide hinge through opening;
attach spring to hinge;
screw hinges to oven face;
repeat on other side;
attach hinges to door;
while decorative panels are off, vacuum
install decorative panels.
DONE. Read more...

Your Price

$67.77

Door Hinge - Left Side

★★★★★

(1)

PartSelect Number PS1151518

Manufacturer Part Number 318348801

This hinge is located on left side of the oven door.

Fixes these symptoms

Door won’t close
See more...

Installation Instructions

Xavier from Rocky Point, NY

Springs pooped off door hinges, causing hinges to break through door face

Remove decorative side panels on stove to expose backside of hinge and springs;
remove door;
remove old hardware;
since hinge openings were bent, straighten hinge opening in oven face;
attach spring to inside of oven;
slide hinge through opening;
attach spring to hinge;
screw hinges to oven face;
repeat on other side;
attach hinges to door;
while decorative panels are off, vacuum
install decorative panels.
DONE. Read more...

Your Price

$69.72

Hinge - Left Side

PartSelect Number PS2364195

Manufacturer Part Number 316566209

This hinge includes the spring.

Installation Instructions

Mike from CARLSBAD, CA

Oven door would not close...trouble shooting indicated a faulty hinge.

I loosened two screws(one on the left and one on the right) at the inside base of the oven door, then lifting the door off. The hinges are held in place by two screws and a flat metal covering. Remove the faulty hinges. The screw holes on the new hinges have to have some WD40 applied and then screw the screws in and out to widen the holes a bit. Once the screw goes in easily, remove them and insert the hinge into the hole that you removed the old hinges from. Replace the metal covering and insert the screws. tighten the screws. Open the hinges then slip the door back onto the hinges. Reinsert the two screws at the bottom of the door and tighten. I recommend replacing both hinges as there is a plastic insert in the hinge that becomes brittle over time and breaks. Read more...

Your Price

$181.97

Door Hinge with Spring

PartSelect Number PS436470

Manufacturer Part Number 316007002

Sold Individually.

Your Price

$44.82

HINGE

PartSelect Number PS441377

Manufacturer Part Number 318024401

Your Price

$37.68

Hinge - Right Side

PartSelect Number PS2364194

Manufacturer Part Number 316566208

Installation Instructions

Mike from CARLSBAD, CA

Oven door would not close...trouble shooting indicated a faulty hinge.

I loosened two screws(one on the left and one on the right) at the inside base of the oven door, then lifting the door off. The hinges are held in place by two screws and a flat metal covering. Remove the faulty hinges. The screw holes on the new hinges have to have some WD40 applied and then screw the screws in and out to widen the holes a bit. Once the screw goes in easily, remove them and insert the hinge into the hole that you removed the old hinges from. Replace the metal covering and insert the screws. tighten the screws. Open the hinges then slip the door back onto the hinges. Reinsert the two screws at the bottom of the door and tighten. I recommend replacing both hinges as there is a plastic insert in the hinge that becomes brittle over time and breaks. Read more...