If you are having trouble opening your drawer easily or it has been damaged/broken, replacing the rear drawer glide could be the solution. The glide attaches to the rear of the oven drawer and supports the sides of the drawer. This allows the drawer to slide in and out of range without difficulty. Only one tool is needed for this repair, a flat blade screw driver. Make sure to unplug the oven and wear gloves before repair to protect hands in case range is not cooled before repairing. This an OEM part sourced directly from the manufacturer.
The front drawer glide is designed to help the bottom drawer on your range slide in and out smoothly. If the drawer is not operating as intended, or the drawer will not close all the way, the front drawer glide may require changing. Luckily this is a very easy repair, all you need is a flat head screwdriver. Simply snap the old drawer glide out, and snap the new one in. Use the flat head screwdriver to pop out a stubborn old drawer glide. The front door glide differs in shape from the rear drawer glide, so ensure you have the correct part prior to installation. This product is sold individually.
This draw channel is used for drawers in a baking oven. It works as a rail for the drawer to glide on easily. If you are having trouble gliding your drawer in and out, it is best to replace it. It is 30.5 inches in length, 10.25 inches in width, 3.75 inches in height, and weighs 4.15 pounds. Refer to the manual provided by the manufacturer for installation instructions. As a safety precaution, remember to unplug your appliance from the power source before starting the repair.