Gibson Range Trim
Popular Gibson Range Trim
Gibson Range TRIM KIT-DOOR
2. Remove 2 top screws holding vent cover and carefully remove
cover
3. Open door all the way and lift, door will come of the microwave
4. Set door on a flat surface facing down
5. You will need a flat screwdriver,carefully set the screwdriver
between the door and the black plastic and pry out completely
6. Remove screws holding handle. (This will be a good time to clean
the inside of this door)
7. Attach new handle tighten screws
8. Put black plastic back in door and press on all around make sure
that is set in place
9. Re-install door and vent. Read more...
PartSelect Number PS2364260
Manufacturer Part Number 5303935318
Installation Instructions
Robert from WATERTOWN, MA
Broken Handle
1. Order part2. Remove 2 top screws holding vent cover and carefully remove
cover
3. Open door all the way and lift, door will come of the microwave
4. Set door on a flat surface facing down
5. You will need a flat screwdriver,carefully set the screwdriver
between the door and the black plastic and pry out completely
6. Remove screws holding handle. (This will be a good time to clean
the inside of this door)
7. Attach new handle tighten screws
8. Put black plastic back in door and press on all around make sure
that is set in place
9. Re-install door and vent. Read more...
Gibson Range Door Trim Kit - White
PartSelect Number PS470226
Manufacturer Part Number 5303935192
This trim kit included the bottom and side trims.
Related Gibson Range Parts
- All Gibson Range parts
- Gibson Range Brackets and Flanges
- Gibson Range Drawers and Glides
- Gibson Range Drip Bowls
- Gibson Range Elements and Burners
- Gibson Range Handles
- Gibson Range Hardware
- Gibson Range Hinges
- Gibson Range Insulations
- Gibson Range Insulations
- Gibson Range Knobs
- Gibson Range Lights and Bulbs
- Gibson Range Panels
- Gibson Range Racks
- Gibson Range Seals and Gaskets
- Gibson Range Switches
- Gibson Range Valves