Whirlpool Range Valves
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Whirlpool Range Valves
Whirlpool Range Surface Burner Valve - 16k Left Front & Right
PartSelect Number PS11750353
Manufacturer Part Number WPW10206288
This is a surface burner valve for the left front and right front of your range. Burner valves are attached to the main gas line. When the switch is turned the gas then flows into a tube that mixes with air, creating the appropriate mixture for combustion. The valve monitors and controlsl the gas flow to the surface burner. It is roughly 3 inches long, 1.5 inches high, and about an inch wide. You should consider changing this part if your current one has seized and your range will not start.
Fixes these symptoms
- Gas smell
- Will Not Start
- See more...
Installation Instructions
Steve from Tracy, CA
Burner valve was seized
Lock the oven/stove controls by holding the START button for five seconds. This shuts off gas to the valve. Remove the knobs from the front of the stove using philips screwdriver. Undo the six screws that hold on the front bezel and remove to find the valve. Unscrew the top bracket using philps screwdriver. disconnect the valve using a wrench (I think it was 12mm). Compare the valve to the new one. Installation is reverse. Press the START button for five seconds to unlock the oven/stove. Test fire the burner. Cook a batch of chili.
Read more...
Whirlpool Range Burner Valve - Left And Right Rear
PartSelect Number PS11750352
Manufacturer Part Number WPW10206287
This surface burner gas valve is designed to regulate the flow of gas to individual burners on compatible cooktops and ranges. It allows for precise control of heat levels during cooking and plays a critical role in safe and efficient operation. If a burner fails to light, produces low heat, or has an unstable flame, a faulty valve may be the cause. Made from durable materials, this replacement part is compatible with a wide range of models across major brands.
Fixes these symptoms
- Will Not Start
- See more...
Installation Instructions
John from BEAUMONT, CA
Gas valve to grill burner locked closed.
1. Pulled range out from its cabinet setting and turned off the gas and unplugged the electric cord. 2. Removed all knobs (and soft pads) to burners. 3. Removed curved cover that covers the burners gas valves, gas manifold and igniter harness. 4. Removed a part that could be referred to as a flange or riser that is attached to the top of the range front at the burner level which the top of the curved piece is attached to. 5.The igniter attachments to the gas valves come off by pulling them away from the valve. I pulled away the one for the grill. 6. With these parts removed, eye sight and 1/2" open end wrench access is given to where the gas valve is attached to the burner gas line. 7. Disconnected the valve from the burner line. 8.Removed the bracket that holds the valve in place, thus removing the valve. 9. Installed new valve and bracket and attached valve to burner line. 10. Reattached the igniter part to the valve, then attached the flange (#4), then the curved cover, then the burner knobs (and soft pads). 11.Reconnected the electric cord and opened the gas valve. 12 Pushed the range back into its cabinet place and pushed the 'Cancel:' mark as directed by the digital read-out on the range's back riser control panel. Checked for gas leak. None. It took a bit of scrutiny to see what to remove and in what sequence.
Read more...
Whirlpool Range Lp Orifice
PartSelect Number PS12070661
Manufacturer Part Number W11087486
This LP orifice is for the bake and broil, 17K & 11K. The LP orifice helps control the gas that comes out of the burner tubes.
Installation Instructions
Andy from LOYALTON, CA
Natural Gas to Liquid Petrolium Conversion
The LP Conversion kit for the 5 surface burners that was supplied with the range are wrong. The oven and broiler orifice jets that came with the range were correct. Order the 5 surface jets to complete your LP conversion.
Read more...
Whirlpool Range Lp Conversion Kit
PartSelect Number PS11749494
Manufacturer Part Number WPW10170516
This LP surface burner conversion kit is designed to convert select gas ranges from natural gas to liquid propane (LP). It includes five precision-sized orifices that replace the original burner spuds, ensuring proper flame characteristics for LP fuel. This kit is compatible with various models and helps maintain safe and efficient burner operation. Please note that this kit is intended for surface burners only; oven conversion may require separate components. Always verify compatibility with your specific range model before installation.
Installation Instructions
Andy from LOYALTON, CA
Natural Gas to Liquid Petrolium Conversion
The LP Conversion kit for the 5 surface burners that was supplied with the range are wrong. The oven and broiler orifice jets that came with the range were correct. Order the 5 surface jets to complete your LP conversion.
Read more...
Whirlpool Range Burner Head - 16k
PartSelect Number PS11754347
Manufacturer Part Number WPW10406878
This part distributes flame evenly to your cookware.
Installation Instructions
Charles from ATLANTA, GA
REPLACING burner head and ignitor
Remove the screw on the front of each side, also there are two screws holding the burner controls. Remove the burner knobs. There are two screws holding the burner head to the top of the burner panel, looking down on the burner head, these will not come out easily. Here's where the drill comes in. Drill the two screws head off, there are two gas line connections that must be removed, be careful not to twist the gas line. Remove the burner head and replace with the new one. When replacing the burner head, screw the gas line to the burner head first, then to the main gas control.
Read more...
Whirlpool Range Burner Tube - Right Front
PartSelect Number PS11731644
Manufacturer Part Number W10861724
Upgrade your Whirlpool appliance with the hardy and reliable Right Front Burner Tube. This essential component is designed with an integrated orifice, ensuring precise control and improved efficiency of your burner. Notably, it features a first-rate VENTURI system to guarantee an optimal mix of air and gas, boosting your appliance's performance while keeping energy use to a minimum. Crafted for longevity and superior performance, this Whirlpool Burner Tube is a high-quality replacement part dedicated to enhancing your cooking experience. Trust in Whirlpool's reputation for quality appliances and parts and ensure your kitchen functions at its best.
Whirlpool Range Burner Head
PartSelect Number PS12745735
Manufacturer Part Number W11435630
This gas range burner head is a durable metal component designed to distribute flame evenly for consistent heat during cooking. It sits above the cooktop burner and helps maintain proper flame control and reliable performance. This part is commonly replaced when the burner produces uneven flames or shows signs of wear. Installation involves placing the burner head onto the burner base and requires no tools, ensuring the appliance is powered off and cool before replacement.
Whirlpool Range Liquid Propane Conversion Kit
PartSelect Number PS11756781
Manufacturer Part Number WPW10619560
This liquid propane conversion kit is supplied directly by the manufacturer for use in gas ranges. Each kit includes orifices that fit onto the burner valves. The kit allows a range originally configured for natural gas to be converted to use liquid propane as its fuel source. This conversion is important for homes or locations where natural gas is not available, as it allows the range to be used with an alternative fuel source. Be sure to select the correct conversion kit for your make and model as using the incorrect kit is extremely dangerous.
Whirlpool Range Burner Cap (black)
PartSelect Number PS11747514
Manufacturer Part Number WP98017461
Sold individually.
Installation Instructions
George from CASTROVILLE, CA
Whirlpool Range Orifice Holder - Right Front
PartSelect Number PS11775329
Manufacturer Part Number W11050487
This genuine OEM Orifice Holder - Right Front Surface Burner from Whirlpool is the perfect part for repairing your range. Functioning as both an orifice holder and igniter, it directs gas flow to the burner head and ignites the gas using a spark produced by the igniter electrode. Before installing this part, ensure your range is unplugged and the gas supply is turned off. It's also advisable to wear work gloves to protect your hands during the installation. It's important to verify that this part correctly fits your model before purchase, as shapes and sizes may slightly vary. Trust in Whirlpool's dependable and high-quality appliance repair parts for your kitchen needs.
Related Whirlpool Range Parts
- All Whirlpool Range parts
- Whirlpool Range Brackets and Flanges
- Whirlpool Range Caps and Lids
- Whirlpool Range Circuit Boards and Touch Pads
- Whirlpool Range Cooktops
- Whirlpool Range Doors
- Whirlpool Range Drawers and Glides
- Whirlpool Range Drip Bowls
- Whirlpool Range Ducts and Vents
- Whirlpool Range Elements and Burners
- Whirlpool Range Fans and Blowers
- Whirlpool Range Filters
- Whirlpool Range Fuses
- Whirlpool Range Grates
- Whirlpool Range Grilles and Kickplates
- Whirlpool Range Handles
- Whirlpool Range Hardware
- Whirlpool Range Hinges
- Whirlpool Range Hoses and Tubes
- Whirlpool Range Igniters
- Whirlpool Range Ignitions
- Whirlpool Range Insulations
- Whirlpool Range Knobs
- Whirlpool Range Latches
- Whirlpool Range Legs and Feet
- Whirlpool Range Lights and Bulbs
- Whirlpool Range Manuals and Literatures
- Whirlpool Range Motors
- Whirlpool Range Panels
- Whirlpool Range Power Cords
- Whirlpool Range Racks
- Whirlpool Range Seals and Gaskets
- Whirlpool Range Sensors
- Whirlpool Range Springs and Shock Absorbers
- Whirlpool Range Switches
- Whirlpool Range Thermostats
- Whirlpool Range Trims
- Whirlpool Range Wire Plugs and Connectors