Whirlpool Range Switches | Replacement Parts & Accessories | PartSelect

Popular Whirlpool Range Switches

Your Price
$49.44
Surface Burner Element Switch - 8 Inch
PartSelect Number PS11740783
Manufacturer Part Number WP3149400
This surface burner element switch is for an 8-inch surface burner on an oven, stove, or range. The element switch controls the heat of the surface burner. Disconnect power to your range before completing this repair because you will be working closely with electrical circuits. Remove the screws from back panel and the console, and remove the console to expose the switch. It is recommended to check for overheating or arcing on the wiring harness in case they need to be replaced as well. The harness that connects to the switch features a slip-on terminal for easy installation.
Fixes these symptoms
Element will not heat
Oven is too hot
Will Not Start

See more...
Installation Instructions
chaz from fairplay, CO says,

the element did not turn compleatly off, the on light stayed on.
removed the screws holding the back metal panel, this exposed the wires to the switch. tested the wires to find that they were live when the switch was in the off position. ordered a new switch. UNPLU...read more

Your Price
$27.16
Lid Switch
PartSelect Number PS11723153
Manufacturer Part Number W10820036
This 3 prong lid switch is used for washing machines that do not have a tub light.
Fixes these symptoms
Pumps but will not spin
Timer will not advance
Will not agitate

See more...
Installation Instructions
Peter from Westbury, NY says,

washer would not start
To see if the lid switch was the problem I first jumped it out and tried to start the washer. That was the problem. I removed the main controll so I could get to the lid switch. I made the mistake of ...read more

Your Price
$49.95
Range Infinite Burner Switch - 8 Inch
PartSelect Number PS11744487
Manufacturer Part Number WP7403P239-60
This infinite switch is for 8-inch range burners. When an element is unable to produce any heat on a modern oven, the problem may lie with the infinite switch. This switch is responsible for sending power to the surface elements. Check the element and terminal block to ensure they are working properly. If they are in working order, check the infinite switch at the control panel for any wires that have overheated, or broken terminals to or from the infinite switch. If the infinite switch is damaged or malfunctioning, it will need to be replaced. Remember to unplug your range before beginning this repair.
Fixes these symptoms
Element will not heat


Installation Instructions
Dennis from Hagerstown, MD says,

The Burner was getting too hot and you could not regular the tempature
Moved the Appliance out unplugged it and removed the backing plate then Remove the Knob and unscrew the infinite switch then marking the 5 wires to know where the go on the new switch, removing and ...read more

Your Price
$53.07
Infinite Switch - 8"
PartSelect Number PS11740775
Manufacturer Part Number WP3148953
This switch controls the stove top surface burner.
Fixes these symptoms
Element will not heat


Installation Instructions
RON from KAUFMAN, TX says,

The burner would keep heating after turning off the switch
Start by turning off the power to the range.
It was fairly easy to take the "Control Deck" off the top of the range by removing about 8 screws. I leaned the deck forward without removing any wir...read more

Your Price
$67.52
Dual Infinite Control Switch
PartSelect Number PS11754687
Manufacturer Part Number WPW10434452
This switch controls the stove top surface burner.
Fixes these symptoms
Element will not heat


Your Price
$42.58
Infinite Control Switch
PartSelect Number PS11740785
Manufacturer Part Number WP3149404
This switch controls the stove top 6" surface burner.
Fixes these symptoms
Element will not heat


Installation Instructions
Bruce from Pasadena, MD says,

The old switch broke off.
Removed two screws that held the unit in then pulled out a few inches so I could see where the 5 wires were. Then I replaced one at a time till done. then replaced the retaining screws....read more

Your Price
$26.80
SWITCH-INF
PartSelect Number PS12070192
Manufacturer Part Number W10900107
Fixes these symptoms
Element will not heat


Installation Instructions
Edward from Malvern, AR says,

Burner would not heat
First i shut off the power since this is an electric cook top/range. I then removed the knob and the two screws that hold the burner switch in place. I removed the wires one at a time and connected ...read more

Your Price
$55.76
Infinite Switch - 6"
PartSelect Number PS11740774
Manufacturer Part Number WP3148952
This part carries 5.2-6.6 amps.
Fixes these symptoms
Element will not heat


Installation Instructions
Mikhail from Iowa City, IA says,

One of the heat elements in my oven would not heat
1. Disconnected power from my oven.
2. Removed several screws that held the control block
3. Removed two screws that held the switch itself disconnected wires and removed switch
4. Rec...read more

Your Price
$68.20
Infinite Switch
PartSelect Number PS11747215
Manufacturer Part Number WP9758060
This switch controls the stove top surface burner.
Fixes these symptoms
Element will not heat


Installation Instructions
Peter from Myerstown, PA says,

burner would immediately go to high and stay there no matter what temp setting was selected
unplugged the range, removed 5 screws from the back cover and removed the knob and two screws holding the switch to the range. oriented the new switch to the old one and changed over the wires one at ...read more

Your Price
$61.85
Infinite Switch - 8"
PartSelect Number PS11744412
Manufacturer Part Number WP74010824
Sold individually.
Fixes these symptoms
Element will not heat


Installation Instructions
Pete from Longwood, FL says,

center element of triple burner was not working.
I pulled the unit out from the wall. Took the screws out along the sides. Removed screw holding the front controls loose. First I changed the control switch which was very easy. Two screws and a coup...read more