My Orders
Whirlpool Range Trim
GET YOUR OFFICIAL Whirlpool PARTS TO ENSURE VICTORY
Popular Whirlpool Range Trim
NOTE: The trim has been re-designed and no longer requires the screws. The dimples on the bottom hold them in place instead.
NOTE: The trim has been re-designed and no longer requires the screws. The dimples on the bottom hold them in place instead.
Installation Instructions
William from HADLEY, PA
Broken Trim Pieces
Remove vent trim from oven and set oven glass to the side. Next remove handle from vent trim (two screws). Next place handle on new vent trim. Place glass in place, (it is held in place by bottom of oven door and vent trim). next place side trim in place and place that side of the vent trim and loosely tighten screw holding trim into
... Read more
place at top of the glass. Next place the other trim into place under the vent trim and tighten the screws on both sides.
Read less
NOTE: The trim has been re-designed and no longer requires the screws. The dimples on the bottom hold them in place instead.
NOTE: The trim has been re-designed and no longer requires the screws. The dimples on the bottom hold them in place instead.
Installation Instructions
William from HADLEY, PA
Broken Trim Pieces
Remove vent trim from oven and set oven glass to the side. Next remove handle from vent trim (two screws). Next place handle on new vent trim. Place glass in place, (it is held in place by bottom of oven door and vent trim). next place side trim in place and place that side of the vent trim and loosely tighten screw holding trim into
... Read more
place at top of the glass. Next place the other trim into place under the vent trim and tighten the screws on both sides.
Read less
This white right-hand side oven door trim is a functional and aesthetic component designed to frame the outer edge of the oven door. Positioned along the door’s right side, it enhances insulation, helps retain heat, and protects the glass panel from damage. Its durable construction ensures long-term performance while contributing to a clean, finished appearance. Replacing a cracked or damaged trim restores the door’s structural integrity and visual appeal. Installation requires partial disassembly of the oven door and may involve removing screws or panels to access the mounting points.
This white right-hand side oven door trim is a functional and aesthetic component designed to frame the outer edge of the oven door. Positioned along the door’s right side, it enhances insulation, helps retain heat, and protects the glass panel from damage. Its durable construction ensures long-term performance while contributing to a clean, finished appearance. Replacing a cracked or damaged trim restores the door’s structural integrity and visual appeal. Installation requires partial disassembly of the oven door and may involve removing screws or panels to access the mounting points.
Installation Instructions
Philip from Vandalia, MI
Replace shattered outer door glass
This is not the best design. You'll need to have an extra set of hands to hold the trim pieces in place. Remember the glass is positioned outside [on top of]the trim pieces. Be careful as the trim pieces are rather brittle and can be hard to locate in their proper position. Position glass in the holding tabs at the bottom, hold glass ag
... Read more
ainst the trim pieces and gently position door handle over glass and trim.The handle holds everything together. No instructions are shipped w/ parts.
Read less
Screws are not included with the trim. Must order screws separately.
Screws are not included with the trim. Must order screws separately.
Installation Instructions
Philip from Vandalia, MI
Replace shattered outer door glass
This is not the best design. You'll need to have an extra set of hands to hold the trim pieces in place. Remember the glass is positioned outside [on top of]the trim pieces. Be careful as the trim pieces are rather brittle and can be hard to locate in their proper position. Position glass in the holding tabs at the bottom, hold glass ag
... Read more
ainst the trim pieces and gently position door handle over glass and trim.The handle holds everything together. No instructions are shipped w/ parts.
Read less
Trim only in white. Screws not included.
Trim only in white. Screws not included.
Installation Instructions
Jeffrey from Orange, CA
Rusted lower trim
Tried to do it myself and broke the left trim piece. Use two people!
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
Installation Instructions
Elijah from Killeen, TX
I had several broken appilances broken with parts to be replaced.
I had ordered the parts from Part Select and came with in a week. I ahd a Whrilpool microwave that had a door panel and vent grille that needed to be replaced and that was rplced with ease took less that five minutes to do. My Maytag refridgerator had it kickplate grille replace along with the pivot block that took all of about two minut
... Read more
es. The longest job that took about 5 minutes was my Whirlpool glass oven door that needed to be replaced, but that was pretty ease to replace also with an extra hand from my son. I just didn't want to break another glass door or I would have done it myself plus I was teaching him how to do self reparts.
Read less
Does your GE freezer seem to be not cooling as efficiently as it used to? The issue might be with the evaporator fan cover in your freezer. It's an unsung hero that assists in maintaining the right temperature within your freezer, keeping your food perfectly chilled. The GE Freezer Fan Cover, designed specifically for your GE appliance, protects the crucial evaporator fan. Managing consistent air circulation, this part plays a key role in the refrigeration cycle. By making sure the air is circulating correctly, it helps your freezer doing its job, keeping your food safe and well-preserved. Before installing, remember to unplug your refrigerator. Also ensure your food remains stored in a proper place so that it doesn?t go bad. While making the fix, it's a good idea to wear some work gloves for safety. Prove you've got this by choosing the GE Freezer Fan Cover. It's a high-quality part designed just for GE appliances, enhancing your freezer's performance and helping it work like new again. Experience the satisfaction of a well-performing freezer, and say goodbye to thawed ice cream and underchilled meats. With the GE Freezer Fan Cover, you're in control of your appliance's health and efficiency.
Does your GE freezer seem to be not cooling as efficiently as it used to? The issue might be with the evaporator fan cover in your freezer. It's an unsung hero that assists in maintaining the right temperature within your freezer, keeping your food perfectly chilled. The GE Freezer Fan Cover, designed specifically for your GE appliance, protects the crucial evaporator fan. Managing consistent air circulation, this part plays a key role in the refrigeration cycle. By making sure the air is circulating correctly, it helps your freezer doing its job, keeping your food safe and well-preserved. Before installing, remember to unplug your refrigerator. Also ensure your food remains stored in a proper place so that it doesn?t go bad. While making the fix, it's a good idea to wear some work gloves for safety. Prove you've got this by choosing the GE Freezer Fan Cover. It's a high-quality part designed just for GE appliances, enhancing your freezer's performance and helping it work like new again. Experience the satisfaction of a well-performing freezer, and say goodbye to thawed ice cream and underchilled meats. With the GE Freezer Fan Cover, you're in control of your appliance's health and efficiency.
This door trim is bisque in color.
This door trim is bisque in color.
Installation Instructions
Djinnee from Jupiter, FL
the screw came out of the oven door and the snapped the side molding in half
Well I had my oven door ducked taped together. I Am a 51 yr old female and I laid on the floor on my back to see if I could get the rest of the molding out without having to take off the entire oven door. I was able yo pop out the rest of the broken molding. I wasn't able to snap in the put it under the front of the oven door hold it to
... Read more
gether and screw in my new screw on the inside of the oven door. IT WORKED!! If I can do this so can you.
Read less
Sold individually.
Sold individually.