My Orders
Whirlpool Range Motors
GET YOUR OFFICIAL Whirlpool PARTS TO ENSURE VICTORY
Popular Whirlpool Range Motors
This OEM drive motor is designed to operate the drum in electric and gas dryers by turning the drive belt, enabling proper rotation during drying cycles. Compatible with most Whirlpool-incorporated dryer brands manufactured before 1996, it includes a pre-attached pulley, which is not available separately. If the motor has shorted out or failed, the drum will no longer spin, and replacement is necessary to restore full functionality. Installation requires disconnecting the dryer from its power source before removing the old motor and installing the new one. This component is sold individually and meets original equipment standards for performance and reliability.
This OEM drive motor is designed to operate the drum in electric and gas dryers by turning the drive belt, enabling proper rotation during drying cycles. Compatible with most Whirlpool-incorporated dryer brands manufactured before 1996, it includes a pre-attached pulley, which is not available separately. If the motor has shorted out or failed, the drum will no longer spin, and replacement is necessary to restore full functionality. Installation requires disconnecting the dryer from its power source before removing the old motor and installing the new one. This component is sold individually and meets original equipment standards for performance and reliability.
Installation Instructions
Mark from Fremont, NE
Wife told me Dryer would make a funny sound, then stop + had an a funny smell as well. The Electric motor that drove the unit was overheating and locking up, It was time to be replace.
The best part of my repair was I had everything back in service in 3 days. And one of these days was to consider just buying a new dryer. Had parts overnited and all parts fit and easy to replace.
1) Removed back - 6 screws
2) Removed dryer vent - 2 screws on top, 3 on bottom
3) Popped the top open
4) Removed Fro ... Read more nt of dryer cabinet - 2 screws
5) Removed Belt
6) Removed Drum
7) Cleaned up all lint
8) Pop off motor retainers front and back
Here is the tricky part for me.
9) Removed vent fan on back of motor.
I did not know that the back of the fan was square, and you could put an open ended wrench on it to hold it while you also have a vice grip on the front motor shaft. Then its a simple left to loosey operation. I first tryed to turn the fan blade to take it off, but proved to be to tight.
10) Repeat backwards to reassemble
While I had it apart I also replaced the Drum support rollers & Installed a new belt. Not that diffucult of a repair Good Luck, was certainly better than buying a new one at + $300.00 at Black Friday rates.
1) Removed back - 6 screws
2) Removed dryer vent - 2 screws on top, 3 on bottom
3) Popped the top open
4) Removed Fro ... Read more nt of dryer cabinet - 2 screws
5) Removed Belt
6) Removed Drum
7) Cleaned up all lint
8) Pop off motor retainers front and back
Here is the tricky part for me.
9) Removed vent fan on back of motor.
I did not know that the back of the fan was square, and you could put an open ended wrench on it to hold it while you also have a vice grip on the front motor shaft. Then its a simple left to loosey operation. I first tryed to turn the fan blade to take it off, but proved to be to tight.
10) Repeat backwards to reassemble
While I had it apart I also replaced the Drum support rollers & Installed a new belt. Not that diffucult of a repair Good Luck, was certainly better than buying a new one at + $300.00 at Black Friday rates.
Read less
This control panel cooling fan is a blower motor assembly designed to regulate airflow within the control panel area of select ranges and ovens. Engineered to prevent overheating, it helps maintain optimal operating temperatures for electronic components, thereby extending their lifespan and ensuring consistent performance. The assembly includes a hall sensor for precise monitoring and is intended to replace older fan models across a variety of compatible units. Common symptoms of a failing fan—such as low-speed errors, stalling, or smoke—can be resolved with this replacement.
This control panel cooling fan is a blower motor assembly designed to regulate airflow within the control panel area of select ranges and ovens. Engineered to prevent overheating, it helps maintain optimal operating temperatures for electronic components, thereby extending their lifespan and ensuring consistent performance. The assembly includes a hall sensor for precise monitoring and is intended to replace older fan models across a variety of compatible units. Common symptoms of a failing fan—such as low-speed errors, stalling, or smoke—can be resolved with this replacement.
What this part fixes:
- Element will not heat
- Little to no heat when baking
- Oven is too hot
Installation Instructions
Richard from EUGENE, OR
FE80 Error, blower motor underperforming
Remove cover under controls, unscrew rangetop (front only). Motor on right side of oven directly under rangetop detaches with 3 screws and remove with care. Swap foam seal to new motor and install. May require contact cement to attach seal to new part.
Explore the whirlpool blower motor assembly, a genuine OEM part compatible with a range of models by Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef. This cooling fan motor assembly plays a crucial role in maintaining the functionality of stoves, ovens, and ranges, circulating air through the oven control area. It ensures all controls, wiring, and other components stay cool during use, thereby optimizing durability and performance. The fan blade measures 45 millimeters in diameter, fitting perfectly into most double ovens and enhancing efficiency. The assembly comes with an insulation strip to prevent air leaks through the back oven panel. Trust in Whirlpool's quality construction and upgrade your appliance with this blower motor assembly today.
Explore the whirlpool blower motor assembly, a genuine OEM part compatible with a range of models by Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef. This cooling fan motor assembly plays a crucial role in maintaining the functionality of stoves, ovens, and ranges, circulating air through the oven control area. It ensures all controls, wiring, and other components stay cool during use, thereby optimizing durability and performance. The fan blade measures 45 millimeters in diameter, fitting perfectly into most double ovens and enhancing efficiency. The assembly comes with an insulation strip to prevent air leaks through the back oven panel. Trust in Whirlpool's quality construction and upgrade your appliance with this blower motor assembly today.
Installation Instructions
Joseph from North Grosvenordale, CT
The original blower squirrel cage failed out balance.
Safety first , I shut off the circuit breaker . I removed the racks from inside the wall oven . I removed the the wall oven from the niche .Then removed the three sheet metal panels in the rear of the oven exposing the mounting screws that hold the blower down .I removed the wires from the blower motor and then the blower assembly ,then I
... Read more
removed the small duct affixed to the blower assembly by a single sheet metal screw and transferred it to the new blower assembly . I installed the adhesive backed foam strip that is a vibration dampener and reassembled in reverse order.Once the over was returned to its original position in the wall mounting I turned the breakers back on and tested the oven ...AAAAAAAAA++++++++++++ To be fair i must admit that I am not a novice at this 15 years of my working career revolved around HVAC and appliance repair ,still however a novice that is mechanically inclined can perform the same task in about 70 to 80 minutes as opposed to my 35 . That is all there is to it.
Read less
This cooling fan motor assembly is engineered to regulate internal temperatures within ranges and wall ovens by actively circulating air. Positioned to draw in cooler air and expel heated air, it plays a critical role in maintaining consistent cooking performance and protecting sensitive components such as the control board and wiring. By preventing overheating, it ensures the longevity of internal electronics and helps avoid issues like a hot control panel or erratic oven behavior. The assembly is typically housed near the rear or top of the appliance and may produce noticeable noise when failing, including grinding or loud humming. Installation requires disconnecting power, accessing the rear panel, and securing the new motor in place using existing mounts and connectors. Dimensions and mounting specifics may vary slightly depending on the oven model, but the unit is designed to fit standard configurations.
This cooling fan motor assembly is engineered to regulate internal temperatures within ranges and wall ovens by actively circulating air. Positioned to draw in cooler air and expel heated air, it plays a critical role in maintaining consistent cooking performance and protecting sensitive components such as the control board and wiring. By preventing overheating, it ensures the longevity of internal electronics and helps avoid issues like a hot control panel or erratic oven behavior. The assembly is typically housed near the rear or top of the appliance and may produce noticeable noise when failing, including grinding or loud humming. Installation requires disconnecting power, accessing the rear panel, and securing the new motor in place using existing mounts and connectors. Dimensions and mounting specifics may vary slightly depending on the oven model, but the unit is designed to fit standard configurations.
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
Used with down-draft models. This part helps draw the steam and odors through the vent when the fan switch is activated.
Used with down-draft models. This part helps draw the steam and odors through the vent when the fan switch is activated.
Installation Instructions
Marla from Newtown, PA
Blower died
Getting at the part was difficult. The top and both side panels had to be removed to reach the blower. Once they were off, it was fairly easy to swap out the blower. The repair guy wanted $140 for the part and $160 to insall. I did it myself for $94! If you do it yourself, keep a good record of what screws came from where as you go. This
... Read more
makes re-assembly much easier.
Read less
This fan motor drives airflow for cooling or ventilation as required. Proper air movement helps maintain stable operation and efficiency. Replacing a failing motor restores quiet, reliable airflow.
This fan motor drives airflow for cooling or ventilation as required. Proper air movement helps maintain stable operation and efficiency. Replacing a failing motor restores quiet, reliable airflow.
This fan motor assembly is a genuine OEM replacement designed for ranges and ovens, ensuring proper air circulation during operation. Its primary role is to rotate the convection or cooling fan blade, which helps maintain stable temperatures for even cooking and prevents overheating of essential electronic components. By promoting consistent airflow, this part supports optimal performance and reliability. For safety, always disconnect power before installation and follow the manufacturer’s instructions.
This fan motor assembly is a genuine OEM replacement designed for ranges and ovens, ensuring proper air circulation during operation. Its primary role is to rotate the convection or cooling fan blade, which helps maintain stable temperatures for even cooking and prevents overheating of essential electronic components. By promoting consistent airflow, this part supports optimal performance and reliability. For safety, always disconnect power before installation and follow the manufacturer’s instructions.