What it does. Why it matters. Everything you need to know for an easy fix.
RING-TUB Specifications
This top load washer tub ring fits along the top edge of the outer tub to help prevent water from splashing out during wash cycles. It also supports proper tub movement to reduce shaking and noise. Made from durable plastic, this part can help restore normal washer operation if issues like leaking, excessive movement, or unusual sounds are occurring.
Part #W10849477
Manufactured by
Whirlpool
for Whirlpool, Maytag, Kenmore, Admiral
OEM stands for Original Equipment Manufacturer. This means that the company who made your appliance is also supplying the replacement part.
Features
OEM
Generic
Genuine brand name
Guaranteed to fit
Superior Quality
Long term value
About this fix
Common problems and models this part fixes.
Works with the following products:
Washer
Part# W10849477 replaces these:
W10578859
DIY Questions and Expert Answers
7 questions answered by our Repair Experts.
Ask our experts a question about this part and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
William - For model number 11025132410
July 27, 2021
What does this part do? Will it stop a leak coming out the bottom of the machine wetting the gear case the washing machine pulley?
Hello William, Thank you for the question. The Tub Ring helps align the Tub and keep it balance. It will not prevent or cause a leak. This issue sounds like a worn Outer Tub Seal. The Seal was only sold as part of the Outer Tub. We looked up the part and it is listed as No Longer Available/Discontinued sorry. There are no part substitutions listed. Our suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers and contact us back with he updated substitution number. We hope this helps!
My machine is ready for takeoff jumping all over and I ordered the hangers but believe they are okay. There is about 3/8 of an inch movement from side to side on the tub. Is the tub ring more likely my problem?
Hello Carl, thank you for contacting us. According to our research, the issue is most probably related to faulty suspension, part number PS12347546, and if they are fine then the drive hub kit, part number PS6012095, is the most likely cause. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
Is this ring supposed to be fluid filled like a conventional balance ring? My washer still shakes badly after hub change, spring changes, and being set level. In the service mode I had it empty and set to low rpm spin and it went off balance immediately.
Hi John, thank you for contacting us. According to our research, the tub ring helps align the tub and keep it balance. It snaps over the top of the tub and creates a splash shield. It is a conventional balance ring. We hope this information helps!
Was this helpful?
Thank you for voting!
Britleigh - For model number WTW5000DW2
August 26, 2023
I have already replaced the suspension rods, and the washer is fine during the wash and rinse cycles now. However, once it starts the spin cycle, it becomes off balanced. It is loud and the drum sounds like it’s banging against the machine as it jumps. Is this the part we need to replace?
Hi Britleigh, thank you for contacting us. If you have already replaced the suspension rods and the washer still shakes during the spin cycle, then you may need to replace the drive hub kit, part number PS6012095, as it is most likely worn out or damaged. We hope this solves your problem!
Hi Roy, thank you for your inquiry. The tub ring you mentioned snaps over the top of the tub, helps to align the tub and keep it balance. It also creates a splash shield. We hope this information is useful!
Was this helpful?
Thank you for voting!
James - For model number WTW5000DW1
January 2, 2024
Hello I’m wondering what parts I need for a minor issue I’m having. When the washer is on spin cycle, it sounds like the drum is rubbing on bear metal almost as if a bearings are seized or felt is missing and something is rubbing directly on the drum. Please let me know what you think. Thank you.
Hi James, thank you for your inquiry. Based on the description, the issue is possibly with the clutch kit, part number PS10057144. We would recommend replacing the clutch kit to fix the issue. We hope this helps, good luck with this repair!
Hi
Is there a way of determining if the damper ring is faulty?
Are you supposed to hear a liquid in it when it’s moved?
Hi Steve,
Thank you for your question. There is no liquid in the tub ring, it is a standard tub ring used to stabilize the washer tub. If it shows signs of damage or wear, it will need to be replaced. We hope this helps!
Was this helpful?
Thank you for voting!
Prev
1
Next
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Item is in stock and is estimated to be delivered in 2-3 business days via Standard Shipping.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Washer","title":"Washer","url":"/Washer-Parts.htm"},{"position":2,"name":"Drum or Tub","title":"Drum or Tub","url":"/Washer-Drums-and-Tubs.htm"},{"position":3,"name":"W10849477","title":"W10849477","url":""}]
My Orders
