This splutch cam kit is a genuine replacement assembly designed for select Whirlpool, Maytag, and affiliated brand washing machines. It plays a critical role in the wash and spin cycles by engaging the drive motor to rotate the washer basket. The kit includes the clutch assembly, cam ring, spring, basket drive gear, pulley, and mounting n...Read moreut. Replacing this component can resolve issues such as noisy operation, slow or failed spinning, poor agitation, and excessive moisture in clothes after a cycle. In some cases, a burning smell may also indicate a failing clutch. Installation requires basic tools and should be performed with the appliance disconnected from power. Compatibility should be confirmed using your washer’s model number.
This genuine OEM suspension rod kit is designed to support the inner tub of your washing machine and minimize vibrations during wash and spin cycles. If your washer has started making loud banging or knocking noises, it could be a sign that the suspension rods are worn or damaged. Replacing them helps prevent the drum from hitting the cab...Read moreinet and extends the life of your appliance. Each kit includes four suspension rods, springs, and suspension ball cups. It’s recommended to replace all four at once, as they generally wear out at the same rate. This kit fits various washing machine models and offers a reliable fix for noise and stability issues.
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installation, you will need a flat head screw driver to replace the clamp and a drill to access the screws to remove the front of the washer. Be care...Read moreful if you do not have specific clamp pliers as the clamp could fly off. Once the front of the washer has been removed, take a quick look for water damage or any obvious signs of where the leak is coming from. If it is not obvious, run water to test.
This is an impact absorber, also known as a sound dampening pad, for washing machines. This sound dampening pad attaches to the top of your washing machine drum to reduce the severity and harshness of vibrations and movement during the washing and spinning cycle, to produce a quieter laundry experience. If your washer is shaking excessive...Read morely during operation, this pad may be worn out or simply missing, and in need of replacement. To replace this pad, you will need a screwdriver or wrench to access the inner portion of your washing machine and remove the old one and install the new one. This OEM pad measures 5-inches by 3-inches and is sold individually.
This drive belt connects the washing machine’s motor to the system, helping spin the basket. If the washer is having trouble spinning, the belt may need replacement. Ensure compatibility before ordering and unplug the washer before installation.
The tub-to-pump hose carries the water from the tub to the drain pump. Unplug the washer and shut off the water supply before installing this part. Wear work gloves to protect your hands
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
3
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Amanda - For model number MVW4505MW1
September 7, 2025
Water dripping from top into basket constantly . What part do I need to replace
Hi Amanda, thank you for reaching out. It seems the water inlet valve is leaking, and you may need to replace it to fix the issue. The part number is PS16543460. We hope this information is useful!
Washer will only run cold water on all temperature settings. Had this problem before and suggested turning down hot water tank and did so. Now doing again.
Hi Cynthia, thank you for contacting us. We would suggest checking the hot water inlet hose for any blockage first. If it is fine, the issue could be with the water inlet valve, part number PS16543460. You may need to replace it to fix the issue. We hope this solves your problem!
Hi Randy, thank you for reaching out. Ensure that the water supply valves are fully open and that there are no kinks in the hoses. Check the water inlet valve for any fault as well. If it is fine, the issue could be the main control board, part number PS16763212. You may need to replace it to fix the issue. We hope this solves your problem!
i've replace the lid switch ,tart doing the diagnostic and it just got stuck in the middle of it.. just after checking infill valves, they worked.
the problem is that the lid is now locked and i'm not able to do anything. i have to mention that there was a water in the drum ...
Hello Marc, thank you for writing in. We recommend replacing the the lid switch PS17215992. The lid switch is a safety device that prevents the washer from agitating or spinning when the lid is raised. If it is faulty, the washer will not run. We hope this helps.
Washer will not drain have replaced the lid lock mechanism runs fine till it needs to drain an spin
Hi Roger,
Thank you for your question. If the washer will not drain, check the drain hose to see if is clogged or kinked. If it is clogged, clean or replace it and if it is kinked reposition it. If the drain pump is clogged or shows signs of damage, it will need to be replaced. We hope this helps!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Noise, grinding sounds. Wash tub stopped turning but motor and cycles kept functioning. Process of elimination, must be the clutch assembly.
71 of 107 peoplefound this instruction helpful.
David from BLOOMINGTON, IN
Easy
30 - 60 mins
Screw drivers, Socket set
Easy, just followed the repair video. Recommend also ordering the drive belt. Bought one locally during my repair.
Was this helpful?
Thank you for voting!
Washer wobble during spin cycle.
35 of 38 peoplefound this instruction helpful.
Jesusa from JEFFERSON CTY, MO
Easy
1- 2 hours
Nutdriver, Screw drivers
Watched a video to get a general idea. Moved washer to garage. Raised lid, supported with s-hook and light chain. Front springs were easy, except no hole for the rod to hang in so used chain and small screwdriver through mounting hole. Back springs were not as easy. Finally removed the back panel to get to the rods. Bingo, much easier an
... Read mored only took 5 min to remove the back panel. reassemble and she works like a charm. Suggest to find a video reflecting your particular brand and model as all are similar but uniquely different. Easy project though.
Read less
Was this helpful?
Thank you for voting!
Replacing shock absorbers on Maytag washer
28 of 32 peoplefound this instruction helpful.
William from JAX BCH, FL
Really Easy
30 - 60 mins
Nutdriver, Screw drivers
Used video provided,but while reinstalling shocks pull the shock absorbers thru holes in washer deck using a stiff wire or a metal coat hanger will also work. This made installation so much easier!
My Orders
