This splutch cam kit is a genuine replacement assembly designed for select Whirlpool, Maytag, and affiliated brand washing machines. It plays a critical role in the wash and spin cycles by engaging the drive motor to rotate the washer basket. The kit includes the clutch assembly, cam ring, spring, basket drive gear, pulley, and mounting n...Read moreut. Replacing this component can resolve issues such as noisy operation, slow or failed spinning, poor agitation, and excessive moisture in clothes after a cycle. In some cases, a burning smell may also indicate a failing clutch. Installation requires basic tools and should be performed with the appliance disconnected from power. Compatibility should be confirmed using your washer’s model number.
This genuine OEM suspension rod kit is designed to support the inner tub of your washing machine and minimize vibrations during wash and spin cycles. If your washer has started making loud banging or knocking noises, it could be a sign that the suspension rods are worn or damaged. Replacing them helps prevent the drum from hitting the cab...Read moreinet and extends the life of your appliance. Each kit includes four suspension rods, springs, and suspension ball cups. It’s recommended to replace all four at once, as they generally wear out at the same rate. This kit fits various washing machine models and offers a reliable fix for noise and stability issues.
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is an 18 ml, or.6 fluid ounces, bottle of touch-up paint. It also features a brush for easy application. This quick-drying, long-lasting paint...Read more is perfect for fixing any nicks, scratches, or chips on the exterior of your appliance. This paint is white in color, and provides a durable finish.
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installation, you will need a flat head screw driver to replace the clamp and a drill to access the screws to remove the front of the washer. Be care...Read moreful if you do not have specific clamp pliers as the clamp could fly off. Once the front of the washer has been removed, take a quick look for water damage or any obvious signs of where the leak is coming from. If it is not obvious, run water to test.
Affresh Washing Machine Cleaner includes three slow-dissolving tablets that help remove odor-causing residue from inside the washer. Suitable for all washer brands, including high-efficiency (HE) machines, the formula is also septic-safe. Place one tablet directly in the empty wash basket and run the Clean Washer cycle, or use a normal cycle with hot water. Use monthly or every 30 wash cycles for best results.
This is a shift actuator, and is designed for use in washing machines. This shift actuator is made to change the mode of the motor between spin and agitate, as well as communicate with the control board how fast the washer is spinning. If the shift actuator in your washer is broken or bad, it can lead to the washer not spinning or agitati...Read moreng correctly and may even show an error code related to that. This shift actuator is made mostly of plastic but does feature a 120V/60HZ/2.8W motor. This actuator is an OEM part and is sold individually.
This is an impact absorber, also known as a sound dampening pad, for washing machines. This sound dampening pad attaches to the top of your washing machine drum to reduce the severity and harshness of vibrations and movement during the washing and spinning cycle, to produce a quieter laundry experience. If your washer is shaking excessive...Read morely during operation, this pad may be worn out or simply missing, and in need of replacement. To replace this pad, you will need a screwdriver or wrench to access the inner portion of your washing machine and remove the old one and install the new one. This OEM pad measures 5-inches by 3-inches and is sold individually.
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to give a fresh new look to any handles or areas that have discoloring due to wear. Make sure to clean the area before you begin and wear a pr...Read moreotective mask for safety. Give the can a good shake and spray a few inches away from the surface. Apply the paint until the area is fully covered as desired. Wait until the paint has dried before using the appliance.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Faye - For model number MVW5035MW0
March 15, 2024
my washer wont start because the lock is broken what can i do to bypass this or fix it
Hello Faye, thank you for contacting us. Based on our research, the broken door lock prevents the washer from starting. In order to fix this, you may need to replace the lid lock assembly, part number PS16543458. Glad to be of assistance!
When I press washer to start the sensor lights up , stays on for a minute then washer just switches to done and washer won't start
Hi Michelle, thank you for contacting us. We would suggest checking the water supply first. If it is fine, the issue could be with the lid lock assembly, part number PS16543458. You may need to replace it to fix the issue. We hope this solves your problem!
Hi Mike, thank you for contacting us. The issue could be with the bearings. They come attached to the gear case, part number PS16730207. You may need to replace it to fix the issue. We hope this solves your problem!
Done light and lid lock light stay on. Lid is not actually locked. When you unplugged the machine for 24 hours, it goes right back to that state. Power button stopped working a few months ago, but could get washer to work by turning middle knob.
Hi Charles, thank you for the question. Based on your description, the washer likely has a faulty lid lock assembly, part number PS16543458. If the machine thinks the lid is locked when it isn't, the sensor inside the lock has likely failed. This prevents the cycle from starting or completing. You may need to replace it to fix the issue. We hope this solves your problem!
Washer will not lock the lid to engage the cycle. Sensing light just blinks. Just replaced the lid lock actuator. Washer is only a couple years old. Any advice will be appreciated.
Hello Chad, thank you for getting in touch. The control board often needs to recognize the new part. With the washer empty, turn the cycle selector one full rotation (360°) counter-clockwise, then three clicks clockwise, one click back, and one click clockwise. All status lights will blink. Turn the knob until only "Done" or "Rinse" is lit, then press Start. Also, check the lid strike, part number PS16543459. This strike component helps secure your appliance door in place, ensuring proper closure and safe operation. We hope this helps.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Noise, grinding sounds. Wash tub stopped turning but motor and cycles kept functioning. Process of elimination, must be the clutch assembly.
71 of 107 peoplefound this instruction helpful.
David from BLOOMINGTON, IN
Easy
30 - 60 mins
Screw drivers, Socket set
Easy, just followed the repair video. Recommend also ordering the drive belt. Bought one locally during my repair.
Was this helpful?
Thank you for voting!
Washer wobble during spin cycle.
35 of 38 peoplefound this instruction helpful.
Jesusa from JEFFERSON CTY, MO
Easy
1- 2 hours
Nutdriver, Screw drivers
Watched a video to get a general idea. Moved washer to garage. Raised lid, supported with s-hook and light chain. Front springs were easy, except no hole for the rod to hang in so used chain and small screwdriver through mounting hole. Back springs were not as easy. Finally removed the back panel to get to the rods. Bingo, much easier an
... Read mored only took 5 min to remove the back panel. reassemble and she works like a charm. Suggest to find a video reflecting your particular brand and model as all are similar but uniquely different. Easy project though.
Read less
Was this helpful?
Thank you for voting!
Replacing shock absorbers on Maytag washer
28 of 32 peoplefound this instruction helpful.
William from JAX BCH, FL
Really Easy
30 - 60 mins
Nutdriver, Screw drivers
Used video provided,but while reinstalling shocks pull the shock absorbers thru holes in washer deck using a stiff wire or a metal coat hanger will also work. This made installation so much easier!
My Orders
