EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

MVW4505MW2 Maytag Washer - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Washer Drive Pulley – Part Number: W10721967
$38.96
In Stock
Washer Drive Pulley
★★★★★
★★★★★
(23)
Part #W10721967
This splutch cam kit is a genuine replacement assembly designed for select Whirlpool, Maytag, and affiliated brand washing machines. It plays a critical role in the wash and spin cycles by engaging the drive motor to rotate the washer basket. The kit includes the clutch assembly, cam ring, spring, basket drive gear, pulley, and mounting nut. Replacing this component can resolve issues such as noisy operation, slow or failed spinning, poor agitation, and excessive moisture in clothes after a cycle. In some cases, a burning smell may also indicate a failing clutch. Installation requires basic tools and should be performed with the appliance disconnected from power. Compatibility should be confirmed using your washer’s model number.
Suspension Rod Kit – Part Number: W11130362
$90.17
In Stock
Suspension Rod Kit
★★★★★
★★★★★
(41)
Part #W11130362
This genuine OEM suspension rod kit is designed to support the inner tub of your washing machine and minimize vibrations during wash and spin cycles. If your washer has started making loud banging or knocking noises, it could be a sign that the suspension rods are worn or damaged. Replacing them helps prevent the drum from hitting the cabinet and extends the life of your appliance. Each kit includes four suspension rods, springs, and suspension ball cups. It’s recommended to replace all four at once, as they generally wear out at the same rate. This kit fits various washing machine models and offers a reliable fix for noise and stability issues.
Touch-Up Paint - White – Part Number: 72017
No Longer Available
Touch-Up Paint - White
★★★★★
★★★★★
(7)
Part #72017
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is an 18 ml, or.6 fluid ounces, bottle of touch-up paint. It also features a brush for easy application. This quick-drying, long-lasting paint is perfect for fixing any nicks, scratches, or chips on the exterior of your appliance. This paint is white in color, and provides a durable finish.
Washer D-Shaped Knob Insert – Part Number: WP8536939
$9.62
In Stock
Washer D-Shaped Knob Insert
★★★★★
★★★★★
(2)
Part #WP8536939
This insert is sold individually. Knob not included. Knob is sold separately.
Hose Clamp – Part Number: WP285655
$9.62
In Stock
Hose Clamp
★★★★★
★★★★★
(2)
Part #WP285655
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installation, you will need a flat head screw driver to replace the clamp and a drill to access the screws to remove the front of the washer. Be careful if you do not have specific clamp pliers as the clamp could fly off. Once the front of the washer has been removed, take a quick look for water damage or any obvious signs of where the leak is coming from. If it is not obvious, run water to test.
Lid Hinge Mounting Screw – Part Number: WPW10119828
$7.47
In Stock
Lid Hinge Mounting Screw
★★★★★
★★★★★
(2)
Part #WPW10119828
Sold individually. NOTE: The color on the screw may not be the same as the image, but will still function the same.
ACTUATOR – Part Number: W11481722
$76.17
In Stock
ACTUATOR
★★★★★
★★★★★
(9)
Part #W11481722
This is a shift actuator, and is designed for use in washing machines. This shift actuator is made to change the mode of the motor between spin and agitate, as well as communicate with the control board how fast the washer is spinning. If the shift actuator in your washer is broken or bad, it can lead to the washer not spinning or agitating correctly and may even show an error code related to that. This shift actuator is made mostly of plastic but does feature a 120V/60HZ/2.8W motor. This actuator is an OEM part and is sold individually.
Agitator – Part Number: W11550891
$68.86
In Stock
Agitator
★★★★★
★★★★★
(6)
Part #W11550891
This agitator assembly is an authentic OEM part that is compatible with various models of washing machines. It consists of a central shaft with a series of fins attached to it. When the washer is operating, the agitator rotates back and forth, causing the clothes to rub against each other and against the agitator itself, which helps to loosen dirt and stains. If the agitator does not move or moves erratically while the washer is running, then this is a sign that it is faulty. You may also hear unusual noises such as grinding or rattling and notice that your clothes are not distributed evenly around the agitator during the wash cycle.
Washer Washplate Screw – Part Number: W10752187
$7.47
In Stock
Impact Absorber – Part Number: WP8564458
$9.62
In Stock
Impact Absorber
Part #WP8564458
This is an impact absorber, also known as a sound dampening pad, for washing machines. This sound dampening pad attaches to the top of your washing machine drum to reduce the severity and harshness of vibrations and movement during the washing and spinning cycle, to produce a quieter laundry experience. If your washer is shaking excessively during operation, this pad may be worn out or simply missing, and in need of replacement. To replace this pad, you will need a screwdriver or wrench to access the inner portion of your washing machine and remove the old one and install the new one. This OEM pad measures 5-inches by 3-inches and is sold individually.
Washer Drain Hose – Part Number: W11244231
$26.82
In Stock
Washer Drain Hose
★★★★★
★★★★★
(17)
Part #W11244231
The drain hose carries used water from the washer to your house drain.
Spray Paint - 12 oz. - White – Part Number: 350930
No Longer Available
Spray Paint - 12 oz. - White
★★★★★
★★★★★
(3)
Part #350930
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to give a fresh new look to any handles or areas that have discoloring due to wear. Make sure to clean the area before you begin and wear a protective mask for safety. Give the can a good shake and spray a few inches away from the surface. Apply the paint until the area is fully covered as desired. Wait until the paint has dried before using the appliance.

Questions And Answers for MVW4505MW2

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jay - For model number MVW4505MW2
September 6, 2025
How can i get a whole toplid lock
Chris Boyle Profile
Hello Jay, thank you for getting in touch. The lid lock assembly, part number PS17215992, is compatible with your model number. We hope this helps.
$55.29
In Stock
Lid Lock
2 people found this instruction helpful.
Was this helpful?
Thank you for voting!
Mike - For model number MVW4505MW2
July 14, 2025
Push on, starts to sense for 7 seconds, lid does not lock and then done light comes on. I unplug power for min. and try again , sometimes lid locks but after few seconds it goes to done. Water valves never activate . I suspect a power spike during a recent thunderstorm while i was not home, maybe. Washer is 6 mo. Old
Chris Boyle Profile
Hi Mike, thank you for reaching out. We would suggest checking the lid lock first. If it is fine, the issue could be with the control board, part number PS17917531. It acts as the brain of the appliance, managing various functions and ensuring optimal performance of the washing machine. You may need to replace it to fix the issue. We hope this solves your problem!
$136.95
On Order
CNTRL-ELEC
2 people found this instruction helpful.
Was this helpful?
Thank you for voting!
Jim - For model number MVW4505MW2
November 21, 2024
Does it have a lint filter that is cleanable.
Chris Boyle Profile
Hello Jim, Thank you for writing. There is a filter in the bottom of the Outer Drum, PartSelect #: PS16660526. Normally it is self cleaning but over time it can get a build up. We hope this helps!
$20.37
In Stock
FILTER
1 person found this instruction helpful.
Was this helpful?
Thank you for voting!
Kimberly - For model number MVW4505MW2
January 17, 2025
New washing machine making a grinding noise, what could be causing this?
Chris Boyle Profile
Hello Kimberly, thank you for contacting us. A grinding noise in the washer could most probably occur due to a malfunctioning transmission. We would recommend checking the transmission, part number PS16730207, to solve the problem. We hope this helps!
$204.36
In Stock
Gearcase
Was this helpful?
Thank you for voting!
Susan - For model number MVW4505MW2
May 19, 2025
Dryer doesn't put out enough heat to dry the clothes
Chris Boyle Profile
Hello Susan, thank you for your inquiry. A clogged or kinked venting system can reduce airflow and heat output. Inspect the venting system to ensure it's clear and not blocked. If that is not the cause, we would recommend checking the thermistor, part number PS11746740, to solve the problem. A malfunctioning thermistor can most probably cause this problem. We hope this helps!
$32.63
In Stock
Dryer Thermostat Internal bias
Was this helpful?
Thank you for voting!
  • 1
  • 2
  • 3

Common Symptoms of the MVW4505MW2

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Noise, grinding sounds. Wash tub stopped turning but motor and cycles kept functioning. Process of elimination, must be the clutch assembly.
71 of 108 people found this instruction helpful.
  • David from BLOOMINGTON, IN
  • Easy
  • 30 - 60 mins
  • Screw drivers, Socket set
Easy, just followed the repair video. Recommend also ordering the drive belt. Bought one locally during my repair.
Was this helpful?
Thank you for voting!
Washer wobble during spin cycle.
35 of 38 people found this instruction helpful.
  • Jesusa from JEFFERSON CTY, MO
  • Easy
  • 1- 2 hours
  • Nutdriver, Screw drivers
Watched a video to get a general idea. Moved washer to garage. Raised lid, supported with s-hook and light chain. Front springs were easy, except no hole for the rod to hang in so used chain and small screwdriver through mounting hole. Back springs were not as easy. Finally removed the back panel to get to the rods. Bingo, much easier an d only took 5 min to remove the back panel. reassemble and she works like a charm. Suggest to find a video reflecting your particular brand and model as all are similar but uniquely different. Easy project though.
Was this helpful?
Thank you for voting!
Replacing shock absorbers on Maytag washer
28 of 32 people found this instruction helpful.
  • William from JAX BCH, FL
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
Used video provided,but while reinstalling shocks pull the shock absorbers thru holes in washer deck using a stiff wire or a metal coat hanger will also work. This made installation so much easier!
Was this helpful?
Thank you for voting!