This splutch cam kit is a genuine replacement assembly designed for select Whirlpool, Maytag, and affiliated brand washing machines. It plays a critical role in the wash and spin cycles by engaging the drive motor to rotate the washer basket. The kit includes the clutch assembly, cam ring, spring, basket drive gear, pulley, and mounting n...Read moreut. Replacing this component can resolve issues such as noisy operation, slow or failed spinning, poor agitation, and excessive moisture in clothes after a cycle. In some cases, a burning smell may also indicate a failing clutch. Installation requires basic tools and should be performed with the appliance disconnected from power. Compatibility should be confirmed using your washer’s model number.
This genuine OEM suspension rod kit is designed to support the inner tub of your washing machine and minimize vibrations during wash and spin cycles. If your washer has started making loud banging or knocking noises, it could be a sign that the suspension rods are worn or damaged. Replacing them helps prevent the drum from hitting the cab...Read moreinet and extends the life of your appliance. Each kit includes four suspension rods, springs, and suspension ball cups. It’s recommended to replace all four at once, as they generally wear out at the same rate. This kit fits various washing machine models and offers a reliable fix for noise and stability issues.
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is an 18 ml, or.6 fluid ounces, bottle of touch-up paint. It also features a brush for easy application. This quick-drying, long-lasting paint...Read more is perfect for fixing any nicks, scratches, or chips on the exterior of your appliance. This paint is white in color, and provides a durable finish.
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installation, you will need a flat head screw driver to replace the clamp and a drill to access the screws to remove the front of the washer. Be care...Read moreful if you do not have specific clamp pliers as the clamp could fly off. Once the front of the washer has been removed, take a quick look for water damage or any obvious signs of where the leak is coming from. If it is not obvious, run water to test.
This washing machine cleaner includes three time-release tablets designed to remove odor-causing residues, grime, and buildup from high-efficiency and top-load washing machines. The tablets work by cleaning the tub, pump, and internal components, helping to eliminate unpleasant smells and maintain optimal performance. Safe for use with se...Read moreptic systems, this cleaner is intended for monthly use?simply place one tablet in an empty washer and run a Normal Cycle with hot water or a Clean Washer Cycle. Regular use can help extend the life of the appliance and ensure fresh, clean laundry results. Always follow the instructions provided for best results.
This is a shift actuator, and is designed for use in washing machines. This shift actuator is made to change the mode of the motor between spin and agitate, as well as communicate with the control board how fast the washer is spinning. If the shift actuator in your washer is broken or bad, it can lead to the washer not spinning or agitati...Read moreng correctly and may even show an error code related to that. This shift actuator is made mostly of plastic but does feature a 120V/60HZ/2.8W motor. This actuator is an OEM part and is sold individually.
This agitator assembly is an authentic OEM part that is compatible with various models of washing machines. It consists of a central shaft with a series of fins attached to it. When the washer is operating, the agitator rotates back and forth, causing the clothes to rub against each other and against the agitator itself, which helps to lo...Read moreosen dirt and stains. If the agitator does not move or moves erratically while the washer is running, then this is a sign that it is faulty. You may also hear unusual noises such as grinding or rattling and notice that your clothes are not distributed evenly around the agitator during the wash cycle.
Introducing the Whirlpool Washer Washplate Screw - your reliable solution for fixing broken or loose washplates in your washing machine. This OEM genuine part, compatible with distinct models of Whirlpool, ensures durability and optimal performance. It primarily functions as a washplate hold down bolt, crucial for the smooth operation of ...Read moreyour washer. Please remember to check the model number of your appliance before securing this precision-engineered product. Installation must always adhere to safety guidelines to guarantee a seamless experience. Equip your washer with this quality Whirlpool product and benefit from its long-lasting service.
This is an impact absorber, also known as a sound dampening pad, for washing machines. This sound dampening pad attaches to the top of your washing machine drum to reduce the severity and harshness of vibrations and movement during the washing and spinning cycle, to produce a quieter laundry experience. If your washer is shaking excessive...Read morely during operation, this pad may be worn out or simply missing, and in need of replacement. To replace this pad, you will need a screwdriver or wrench to access the inner portion of your washing machine and remove the old one and install the new one. This OEM pad measures 5-inches by 3-inches and is sold individually.
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to give a fresh new look to any handles or areas that have discoloring due to wear. Make sure to clean the area before you begin and wear a pr...Read moreotective mask for safety. Give the can a good shake and spray a few inches away from the surface. Apply the paint until the area is fully covered as desired. Wait until the paint has dried before using the appliance.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
3
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rose - For model number MVW4505MW0
June 27, 2024
Can I buy a replacement lid?
Hi Rose, thank you for reaching out. Yes, you can buy a replacement lid. The lid for your model is part number PS16745190. If you require assistance to place an order, please contact customer service!
My lid lock broke. What is the replacement part number for this? Or how does this cover under its 10 year maytag warranty.
Hello Elizabeth, Thank you for contacting PartSelect.com. The Lid Lock for this model is listed as PartSelect Number PS17215992. For the warranty we suggest you contact Maytag. We hope this helps!
I need the power cycle push panel on the control panel
Hello Carol, thank you for contacting us. According to our research, the part you are looking for is part number PS16745201. We hope this information helps!
My washing mechine, When you mash the start button it it sensis and then straight to done. what could it be ?
Hello Lester, thank you for contacting us. According to our research, the most probable cause of the stated issue is a faulty lid lock assembly. If the washer cannot confirm the lid is locked, it will refuse to add water or spin and will skip to the end for safety. You may need to replace the lid lock assembly, part number PS16543458, to solve the problem. We hope this sorts out your problem!
Our washer machine goes from sense to done, the lid latch light doesn't come on, where should i look first.
Hi Brandon, thank you for reaching out. We recommend checking the lid lock, part number PS16543458. It must send a "secured" signal for the machine to start. If the internal sensor or solenoid fails, the machine bypasses the cycle and goes directly to “Done,” requiring lid lock replacement to restore the electrical signal needed for the wash and spin phases. We hope this solves your problem!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Noise, grinding sounds. Wash tub stopped turning but motor and cycles kept functioning. Process of elimination, must be the clutch assembly.
71 of 106 peoplefound this instruction helpful.
David from BLOOMINGTON, IN
Easy
30 - 60 mins
Screw drivers, Socket set
Easy, just followed the repair video. Recommend also ordering the drive belt. Bought one locally during my repair.
Was this helpful?
Thank you for voting!
Washer wobble during spin cycle.
35 of 38 peoplefound this instruction helpful.
Jesusa from JEFFERSON CTY, MO
Easy
1- 2 hours
Nutdriver, Screw drivers
Watched a video to get a general idea. Moved washer to garage. Raised lid, supported with s-hook and light chain. Front springs were easy, except no hole for the rod to hang in so used chain and small screwdriver through mounting hole. Back springs were not as easy. Finally removed the back panel to get to the rods. Bingo, much easier an
... Read mored only took 5 min to remove the back panel. reassemble and she works like a charm. Suggest to find a video reflecting your particular brand and model as all are similar but uniquely different. Easy project though.
Read less
Was this helpful?
Thank you for voting!
Replacing shock absorbers on Maytag washer
28 of 32 peoplefound this instruction helpful.
William from JAX BCH, FL
Really Easy
30 - 60 mins
Nutdriver, Screw drivers
Used video provided,but while reinstalling shocks pull the shock absorbers thru holes in washer deck using a stiff wire or a metal coat hanger will also work. This made installation so much easier!
My Orders
