
RING-TUB W10849477
$
84.58
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Does this part fit my model?
Need help finding your model number?PartSelect Number PS11728126
Manufacturer Part Number W10849477
Manufactured by
Whirlpool
for Maytag, Whirlpool, Kenmore, Admiral
Troubleshooting
This part works with the following products:
Washer.
Part# W10849477 replaces these:
W10578859
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
William
July 27, 2021
What does this part do? Will it stop a leak coming out the bottom of the machine wetting the gear case the washing machine pulley?
For model number 11025132410
Hello William, Thank you for the question. The Tub Ring helps align the Tub and keep it balance. It will not prevent or cause a leak. This issue sounds like a worn Outer Tub Seal. The Seal was only sold as part of the Outer Tub. We looked up the part and it is listed as No Longer Available/Discontinued sorry. There are no part substitutions listed. Our suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers and contact us back with he updated substitution number. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Carl
December 29, 2022
My machine is ready for takeoff jumping all over and I ordered the hangers but believe they are okay. There is about 3/8 of an inch movement from side to side on the tub. Is the tub ring more likely my problem?
For model number MVWC565FW1
Hello Carl, thank you for contacting us. According to our research, the issue is most probably related to faulty suspension, part number PS12347546, and if they are fine then the drive hub kit, part number PS6012095, is the most likely cause. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
John
August 5, 2023
Is this ring supposed to be fluid filled like a conventional balance ring? My washer still shakes badly after hub change, spring changes, and being set level. In the service mode I had it empty and set to low rpm spin and it went off balance immediately.
For model number WTW5000DW1
Hi John, thank you for contacting us. According to our research, the tub ring helps align the tub and keep it balance. It snaps over the top of the tub and creates a splash shield. It is a conventional balance ring. We hope this information helps!
Was this helpful?
Thank you for voting!
Britleigh
August 26, 2023
I have already replaced the suspension rods, and the washer is fine during the wash and rinse cycles now. However, once it starts the spin cycle, it becomes off balanced. It is loud and the drum sounds like it’s banging against the machine as it jumps. Is this the part we need to replace?
For model number WTW5000DW2
Hi Britleigh, thank you for contacting us. If you have already replaced the suspension rods and the washer still shakes during the spin cycle, then you may need to replace the drive hub kit, part number PS6012095, as it is most likely worn out or damaged. We hope this solves your problem!
Was this helpful?
Thank you for voting!
Related Parts:
Roy
October 17, 2023
Is this the balance ring ?
For model number MVWX655DW0
Hi Roy, thank you for your inquiry. The tub ring you mentioned snaps over the top of the tub, helps to align the tub and keep it balance. It also creates a splash shield. We hope this information is useful!
Was this helpful?
Thank you for voting!
James
January 2, 2024
Hello I’m wondering what parts I need for a minor issue I’m having. When the washer is on spin cycle, it sounds like the drum is rubbing on bear metal almost as if a bearings are seized or felt is missing and something is rubbing directly on the drum. Please let me know what you think. Thank you.
For model number WTW5000DW1
Hi James, thank you for your inquiry. Based on the description, the issue is possibly with the clutch kit, part number PS10057144. We would recommend replacing the clutch kit to fix the issue. We hope this helps, good luck with this repair!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Back to Top
You May Also Need
?








Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11728126
Manufacturer Part Number: W10849477
Manufacturer Part Number: W10849477
Brand
Model Number
Description
Back to Top

RING-TUB
$
84.58
In Stock
✖
Stock Status
In Stock
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Washer","title":"Washer","url":"/Washer-Parts.htm"},{"position":2,"name":"W10849477","title":"W10849477","url":""}]