My Orders
Maytag Refrigerator Doors
GET YOUR OFFICIAL Maytag PARTS TO ENSURE VICTORY
Popular Maytag Refrigerator Doors
This is a dairy door for your refrigerator. This part covers the products in the dairy bin section. To access this section, simply lift the lid. This dairy door is made entirely of plastic and is transparent. It is almost 10 inches wide, and roughly 6 inches long. In order to make this repair you will not need any tools, as this part will easily clip in and out of place of the hinged holes.
This is a dairy door for your refrigerator. This part covers the products in the dairy bin section. To access this section, simply lift the lid. This dairy door is made entirely of plastic and is transparent. It is almost 10 inches wide, and roughly 6 inches long. In order to make this repair you will not need any tools, as this part will easily clip in and out of place of the hinged holes.
Installation Instructions
David from Crystal River, FL
Broken or missing retainer bars I butter dish
Took the old ones off and installed the new ones. Simple repair
This is a replacement pivot block for your refrigerator. It is made of white plastic and is approximately 4 inches long and 1 inch wide. The pivot block catches and holds the door mullion cover when you close the door. If your refrigerator door will not close properly, you may need to replace the pivot block. This part is sold individually and is an OEM part sourced directly from the manufacturer.
This is a replacement pivot block for your refrigerator. It is made of white plastic and is approximately 4 inches long and 1 inch wide. The pivot block catches and holds the door mullion cover when you close the door. If your refrigerator door will not close properly, you may need to replace the pivot block. This part is sold individually and is an OEM part sourced directly from the manufacturer.
Installation Instructions
Elijah from Killeen, TX
I had several broken appilances broken with parts to be replaced.
I had ordered the parts from Part Select and came with in a week. I ahd a Whrilpool microwave that had a door panel and vent grille that needed to be replaced and that was rplced with ease took less that five minutes to do. My Maytag refridgerator had it kickplate grille replace along with the pivot block that took all of about two minut
... Read more
es. The longest job that took about 5 minutes was my Whirlpool glass oven door that needed to be replaced, but that was pretty ease to replace also with an extra hand from my son. I just didn't want to break another glass door or I would have done it myself plus I was teaching him how to do self reparts.
Read less
Commonly referred to as the flapper assembly, the door mullion is an important part of a double, or triple door refrigerator.
Commonly referred to as the flapper assembly, the door mullion is an important part of a double, or triple door refrigerator.
Installation Instructions
Don from Alpine, TX
Broken Rail-Mullin
The mullin requires only one screw removal, then LIFT the entire mullin upwards. Pop the wire harness loose, and replace with new mullin. Simple job,
This is a replacement dairy compartment door for your refrigerator. The dairy compartment door opens and closes to allow access to the dairy items stored in the refrigerator door. Because it is made of clear plastic, the door can occasionally become cracked and broken. When the door is cracked, it will need to be replaced. The door measures approximately 15 inches in length and 6 inches in width. To replace the door, carefully remove the old door and insert the new door, lipped edge down. This product is sold individually and is OEM part from the manufacturer.
This is a replacement dairy compartment door for your refrigerator. The dairy compartment door opens and closes to allow access to the dairy items stored in the refrigerator door. Because it is made of clear plastic, the door can occasionally become cracked and broken. When the door is cracked, it will need to be replaced. The door measures approximately 15 inches in length and 6 inches in width. To replace the door, carefully remove the old door and insert the new door, lipped edge down. This product is sold individually and is OEM part from the manufacturer.
Installation Instructions
Patricia from Inglewood, CA
Both parts were broken and required replacement.
The broken part was removed and new part installed without any trouble.
The vertical mullion rail with a built-in mullion heater creates a tight seal between the doors of a French-door refrigerator. This helps prevent air leaks and excess moisture buildup. If you notice condensation or an improper door seal, replacing the mullion rail can help restore efficiency. Always disconnect power before installation and ensure compatibility with your model.
The vertical mullion rail with a built-in mullion heater creates a tight seal between the doors of a French-door refrigerator. This helps prevent air leaks and excess moisture buildup. If you notice condensation or an improper door seal, replacing the mullion rail can help restore efficiency. Always disconnect power before installation and ensure compatibility with your model.
Installation Instructions
Michael from FALLBROOK, CA
When right hand door was opened first, and then left hand door, the mullion rail did not move all the way to the "open" position so that if the left hand door was closed after the right hand door the rail would bang against the right hand door and not close all the way until manually pushed into pos
Remove the existing mullion rail:
- Remove the screw from the center hinged cover.
- Remove the mullion rail by pushing upward. The top and bottom hinges slide over tabs attached to the door. I had to bump it gently from underneath.
- Disconnect the three wire connector that's underneath the center hinged cover.
... Read more
Install the new mullion rail by reversing the above steps:
- Connect the three wire connector and snap it into its holder.
- Slide the new part over the top and bottom hinges. Be sure that all three hinges are correctly lined up before sliding the rail over the tabs.
- Push it down far enough that the hole for the screw in the center cover is lined up with its corresponding receptacle in the door.
- Replace the screw.
- Remove the screw from the center hinged cover.
- Remove the mullion rail by pushing upward. The top and bottom hinges slide over tabs attached to the door. I had to bump it gently from underneath.
- Disconnect the three wire connector that's underneath the center hinged cover.
... Read more
Install the new mullion rail by reversing the above steps:
- Connect the three wire connector and snap it into its holder.
- Slide the new part over the top and bottom hinges. Be sure that all three hinges are correctly lined up before sliding the rail over the tabs.
- Push it down far enough that the hole for the screw in the center cover is lined up with its corresponding receptacle in the door.
- Replace the screw.
Read less
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
This part is the replacement compartment door for your refrigerator. It is made of clear plastic and is approximately 9 inches by 6 inches. The compartment door snaps into the walls of the dairy compartment on the refrigerator door itself and operates on a hinge so that it can open and close. The main reason to replace the compartment door is if yours is cracked, broken, or missing. To replace the compartment door, carefully remove the hinges, then attach the new door into the hinges. This part is sold individually and is an OEM part.
This part is the replacement compartment door for your refrigerator. It is made of clear plastic and is approximately 9 inches by 6 inches. The compartment door snaps into the walls of the dairy compartment on the refrigerator door itself and operates on a hinge so that it can open and close. The main reason to replace the compartment door is if yours is cracked, broken, or missing. To replace the compartment door, carefully remove the hinges, then attach the new door into the hinges. This part is sold individually and is an OEM part.
Installation Instructions
john from NORWOOD, MA
replaced cracked compartment door
removed old and installed new compartment door by hand.
Discover the power of optimal convenience and storage capacity with this flip-up door shelf from renowned brand Whirlpool. Designed to revolutionize your kitchen organization, the door gathers smaller food items into a compact space. Just a flip of the shelf can maximize storage, allowing you to conveniently place larger, taller items right below. This item is a genuine OEM part promising compatibility with selected models of Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef. For the best usage experience, follow the instructions in the owner's manual when installing this part. Elevate your home with sought-after, superior-quality kitchenware from Whirlpool.
Discover the power of optimal convenience and storage capacity with this flip-up door shelf from renowned brand Whirlpool. Designed to revolutionize your kitchen organization, the door gathers smaller food items into a compact space. Just a flip of the shelf can maximize storage, allowing you to conveniently place larger, taller items right below. This item is a genuine OEM part promising compatibility with selected models of Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef. For the best usage experience, follow the instructions in the owner's manual when installing this part. Elevate your home with sought-after, superior-quality kitchenware from Whirlpool.
Installation Instructions
Cynthia from Atlanta, GA
Used frig was missing these items
Just installed them with my hands - very easy. I also found the website easy to navigate and find the parts I needed. Delivery was great also - good job!
This flipper assembly is for refrigerators.
The flipper assembly creates an airtight seal between the doors on a French-door refrigerator.
Safely store any food that could deteriorate while the power is off and unplug the refrigerator before installing this part. Wear work gloves to protect your hands.
This flipper assembly is for refrigerators.
The flipper assembly creates an airtight seal between the doors on a French-door refrigerator.
Safely store any food that could deteriorate while the power is off and unplug the refrigerator before installing this part. Wear work gloves to protect your hands.
Installation Instructions
George from Washingtonville, NY
Broken top mount mullion, broken pin and deli tray lid
Parts arrived quick and installed easy. One reveiwer said his wife did theinstall and that was my inspiration. Thank you.
Introducing the Whirlpool Compartment Door - a clear, sturdy and reliable option for protecting the dairy section of your refrigerator. This genuine OEM part ensures an excellent fit and seamless aesthetic for several Whirlpool fridge models. It provides robust protection, safeguarding your dairy products and enhancing the storage efficiency of your refrigerator. The perfect replacement part that is simple to install with the aid of your owner's manual, enhancing the longevity of your appliance. Please verify the part's compatibility with your model before purchase, considering potential small size and shape variations. Choose the Whirlpool Compartment Door for a quality, durable solution to meet your refrigerator needs.
Introducing the Whirlpool Compartment Door - a clear, sturdy and reliable option for protecting the dairy section of your refrigerator. This genuine OEM part ensures an excellent fit and seamless aesthetic for several Whirlpool fridge models. It provides robust protection, safeguarding your dairy products and enhancing the storage efficiency of your refrigerator. The perfect replacement part that is simple to install with the aid of your owner's manual, enhancing the longevity of your appliance. Please verify the part's compatibility with your model before purchase, considering potential small size and shape variations. Choose the Whirlpool Compartment Door for a quality, durable solution to meet your refrigerator needs.
This Refrigerator Dairy Door is a genuine replacement cover designed to protect dairy items stored in the door bin, such as butter, cheese, and yogurt. Made from clear, durable plastic, it helps maintain a slightly cooler environment within the compartment to preserve freshness. The approximate dimensions are 11" wide by 7" high, with technical specifications listed as about 11.75" L x 5.25" W x 5.75" H. Installation is simple—just snap the cover into place on the designated bin.
This Refrigerator Dairy Door is a genuine replacement cover designed to protect dairy items stored in the door bin, such as butter, cheese, and yogurt. Made from clear, durable plastic, it helps maintain a slightly cooler environment within the compartment to preserve freshness. The approximate dimensions are 11" wide by 7" high, with technical specifications listed as about 11.75" L x 5.25" W x 5.75" H. Installation is simple—just snap the cover into place on the designated bin.
Installation Instructions
Mark from DEARBORN, MI
Our old plastic dairy door had a broken part and it kept coming undone
The new door just popped into place. Took seconds to complete. Fast delivery too.