Maytag Refrigerator Dispensers

Maytag Appliance Parts
Shop By Part Type

Popular Maytag Refrigerator Dispensers

Your Price
$29.69
  In Stock
Refrigerator Dispenser Overflow Grille
★★★★★
★★★★★
(16)
PartSelect Number PS11739623
Manufacturer Part Number WP2206670B
This grille is located on the bottom of the ice/water dispenser to catch the overflow. (Black)
Fixes these symptoms
Installation Instructions
Raymond from Coconut Creek, FL
Kitchenaid refrigerator shelf frames were cracking, needed replacement
I had to purchase two shelves and adjustable brackets - though I only needed the slidign glass shelves . Customjer service rep was helpful and pleasant, though the replacements shelves did not bear the Kitchenaid Logo or frosted scheme on glass shelves (I requested and was informed that the replacement shelves would match my Superbra) - Otherwise, parts, when available, were shipped and arrived in well packaged boxes and not damaged. Parts were cheaper than Kitchenaid, though I would call Kitchenaid first to inquire about matching parts prior to ordering from partselect, if that matters to the buyer...Matching shelves may not in fact be available from manufacturer due to age of appliance. Read more...
Your Price
$69.33
  In Stock
Ice Door Kit
★★★★★
★★★★★
(34)
PartSelect Number PS11723180
Manufacturer Part Number W10823377
In this kit you will find the support, the ice door, spring, and delay. The heater ribbon is no longer needed and therefore will not be included with this part. This kit works in the dispenser chute to let ice through when it is being dispensed. If you have the following symptoms such as: door sweating, difficulty opening or closing door, frost buildup, warm freezer section, or problems with ice dispensing, then this is a solution. The tools needed for this repair are a putty knife, needle nose pliers, and 1/4 inch nut driver. Wear work gloves to protect your hands when performing this repair.
Fixes these symptoms
  • Door Sweating
  • Door won’t open or close
  • Freezer not defrosting
  • See more...
Installation Instructions
BILL from BATESVILLE, MS
Front Door Ice Wouldn't Work And Air Going Into Freezer
Thanks to the pictorial diagram, I was able to order correct parts. It was just a matter of removal of broken parts and replacing them. Ice maker now working and air is no longer getting into freezer which was freezing up ice maker. Thanks for timely delivery, now I am able to use ice dispenser, which I haven't used for long time. Thanks Read more...
Your Price
$19.65
  In Stock
Dispenser Grille - Black
★★★★★
★★★★★
(6)
PartSelect Number PS11738664
Manufacturer Part Number WP12999301B
This dispenser grille catches any overflow from the ice/water dispenser.
Installation Instructions
Gabriele from Phoenixville, PA
Dispenser Was Damaged In Dishwasher
I just exchanged it, was really easy. Ordering of your well set up internet page was very easy and the part arrived extremely fast price was very competitive. I am very happy with the service provided. Read more...
Your Price
$31.93
  In Stock
Overflow Grille - White
★★★★★
★★★★★
(12)
PartSelect Number PS11739625
Manufacturer Part Number WP2206670W
This is a genuine Whirlpool dispenser overflow grille for your refrigerator. This part is made of plastic and snaps in under the water and ice dispensers on your refrigerator door. Its function is to catch drips and spills from the dispenser.
Your Price
$8.60
  In Stock
Ice Chute Door
★★★★★
★★★★★
(4)
PartSelect Number PS11738536
Manufacturer Part Number WP12562701
This part is the replacement ice chute door for your refrigerator/freezer. It is a round, black part that is approximately 2 ½ inches in diameter. The dispenser ice chute door opens to let ice through when dispensing into a glass or some other container. If the chute door is broken, your refrigerator may not be able to dispense ice properly. Be sure to disconnect the power from your refrigerator before you begin this repair. This part is sold individually and is an authentic OEM part sourced directly from the manufacturer.
Fixes these symptoms
Installation Instructions
Janet from Edmonds, WA
Water dispenser got stuck on one function, couldn't get water to work
Removed two screws and took off water dispenser front panel. Unplugged wires to old control board and removed it from brackets holding it to inside of dispenser panel. Aligned and pushed new control (with care to only touch the outside edges of board...cannot touch circuitry which will permanently damage it). Was tricky aligning the board and snapping it back on, but finally got it in place. Repositioned dispenser panel and reattached two screws.
Second problem was the Chute and chute seal had broken off from the hinge chute so it wouldn't open or close when dispensing ice. Was pretty tricky to realign the chute seal to the hinge, but with some paitence and manipulation, was able to reconnect them.
I am REALLY impressed with the detailed drawings I found on PartSelect.com's website. Without these drawings it would have been difficult for me (my husband and son put the parts in, I did the ordering) to know what parts to order. Service was EXCELLENT. I would definitely do business with this company again. Great work!
Read more...
Your Price
$34.04
  In Stock
Dispenser Grille - Black
★★★★★
★★★★★
(5)
PartSelect Number PS11739626
Manufacturer Part Number WP2206671B
This black dispenser grille catches any overflow from the ice/water dispenser.
Installation Instructions
Chris from Plymouth, MN
Grille had permanent water marks
I discovered recently that the grille was removable. The protective coating had been removed because of using a scrub brush to remove hard water stains. It looked horrible and was very hard to keep clean. The new one works fantastically!! No tools required at all. I feel stupid not having done this sooner. Read more...
Your Price
$35.48
  In Stock
Overflow Grille - Black
★★★★★
★★★★★
(2)
PartSelect Number PS11739639
Manufacturer Part Number WP2207007B
This part is located at the base of the dispenser bay catches small spills and allows them to evaporate. The drip tray is removable for easy cleaning.
Installation Instructions
joe from Bel Air, MD
Lower hinge on door, watrer filter and ice/water tray
The notches that create the closing power on the lower hinge was worn out. A few bolts at the top of the door and it was off. One nut to hold the plastic hinge and it was on. Door works perfectly now. Water filter was a breeze and the tray where the ice and water dispenser is was even easier. Parts came incredibly fast and after an order for $75 total and my repairs were done. Read more...
Your Price
$33.81
  In Stock
Dispenser Grille
★★★★★
★★★★★
(5)
PartSelect Number PS11743632
Manufacturer Part Number WP67005636
This drip tray, also known as an overflow grille, is a manufacturer-approved replacement part for your refrigerator. The drip tray catches drips of water from the ice and water dispenser. To replace this part, simply pull out the existing overflow grille, and slide the new one into place.
Installation Instructions
Jeff from Lafayette, LA
Two of the plastic ice/water dispenser hooks were broken from a previous PROFESSIONAL repair and kept falling off.
I ordered a new dispenser and replaced it. It arrived via FEDEX in two days and it took about 10 minutes to replace. Read more...
Your Price
$51.74
  In Stock
Ice Dispenser Door Motor
★★★★★
★★★★★
(8)
PartSelect Number PS11749796
Manufacturer Part Number WPW10184813
This part shuts and opens the ice door on the ice dispenser chute.
Fixes these symptoms
  • Door won’t open or close
  • Ice maker won’t dispense ice
  • See more...
Installation Instructions
James from Valrico, FL
Ice wouldn't dispense from the door.
Simple. Removed the outer ice/water dispenser cover with two screws on the bottom, then removed the ice door mechanism and replaced the small sealing door and door motor. Reassembled and tested . Works perfect. Replacing the door was neccessary as the foam gasket was worn and probably leaking air even though the motor was the real problem. I would absolutely recommend changing the door anytime you have to replace any other part. PartSelect is amazing...ordered the parts on Friday, had them in-hand on Sunday...all for less than $3.00 shipping. Will do business with again. Read more...
Your Price
$19.65
  In Stock
Ice Door Assembly
★★★★★
★★★★★
(8)
PartSelect Number PS11743244
Manufacturer Part Number WP61005883
This ice door assembly is a little over three inches in diameter. It is all white in color and it is made entirely of plastic.
Fixes these symptoms
  • Door Sweating
  • Door won’t open or close
  • Ice maker won’t dispense ice
  • See more...
Installation Instructions
Philip from Plantation, FL
Ice dispenser cover flap was broken.
First I unpluged the refrigerator, then I removed the drip shelf (slides out). Then removed the two screws hidden by the drip shelf. Then I removed the control panel by pulling out on the bottom then lifting slightly to to expose the ribbon cable. The circuit boards you see at this point will deliver an electrical shock if the refrigerator is plugged in. I disconnected the ribbon cable form the control (front) panel. Next I removed three screws that hold the chute assembly in place and worked the chute away from the door. Pay attention to the placement of the water line before you remove the chute. The bad flap fell out at this point but it is easy to fiqure out how to place the new one. When putting the chute back in place make sure the arm holding the flap is aligned in the groove of the solenoid plunger and not just setting on top. (I had to do this twice because the chute would not open the first time I put it back together). About a 30 min job because I took it apart the first time to see what was broken. I only needed the flap, the arm it mounts to an the solenoid were not broken. Easy to do and only cost about $16.00 with shipping for the part. Read more...

Related Parts