My Orders
Crosley Range Ignitions
GET YOUR OFFICIAL Crosley PARTS TO ENSURE VICTORY
Popular Crosley Range Ignitions
This part may differ in appearance, but functions same as original part. : This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
This part may differ in appearance, but functions same as original part. : This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
What this part fixes:
- Element will not heat
- Gas igniter glows, but will not light
- Will Not Start
Installation Instructions
jonathan from Bryson City, NC
No spark at top burners, first one then eventually all 4.
Most of the repair time was spent researching the problem online, locating the spark module inside the range, and selecting the part online. Installation was easy. Key troubleshooting info for me was, if there is no clicking, the spark unit is probably worn-out. I traced the ignition wires from the burners down to the spark module, locate
... Read more
d inside a 2x3" metal housing next to the bottom drawer. I removed 2 screws and out it came. The replacement unit pictured on the PartSelect site was not identical to the original but had the same number of contacts. I ordered the part and it arrived a few days later. The old connectors slipped easily onto the new pins, and I screwed the new unit into the range using the new metal housing. All 4 burners now spark up quickly, and we saved at least $100 on a service call. It was well worth the time and effort -- thanks!
Read less
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
What this part fixes:
- Element will not heat
- Gas igniter glows, but will not light
- Will Not Start
Installation Instructions
scott from centreville, VA
top burners on stove won't ignite ,no clicking noise
remove small panel on right side of stove,then un clip moduke and put wires from old module to new one.
Exact fit nomproblems.
Exact fit nomproblems.
This spark module provides the electrical spark needed to ignite surface burners on a gas range or cooktop, helping ensure safe and reliable burner operation. It is commonly replaced when burners will not light, sparking is weak or inconsistent, or clicking occurs without ignition. This component plays a key role in proper burner startup during normal cooking use. Installation generally involves disconnecting power and gas, accessing the spark module beneath the cooktop, and carefully reconnecting the wiring during replacement; professional installation is recommended to ensure correct and safe operation.
This spark module provides the electrical spark needed to ignite surface burners on a gas range or cooktop, helping ensure safe and reliable burner operation. It is commonly replaced when burners will not light, sparking is weak or inconsistent, or clicking occurs without ignition. This component plays a key role in proper burner startup during normal cooking use. Installation generally involves disconnecting power and gas, accessing the spark module beneath the cooktop, and carefully reconnecting the wiring during replacement; professional installation is recommended to ensure correct and safe operation.
Installation Instructions
Brian from DUDLEY, MA
Stove top spark module broken
Worst part was cleaning my disgusting stove, installation was easy, remember the positioning of the wires from defective module(take picture)
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
Installation Instructions
Julieta from ELMIRA, NY
Gas stove won’t light on half the appliance
First we replaced the wiring harness because a multi-meter said it wasn’t getting power. That was only partially true. The wiring harness was burned looking so we just kept it instead of sending it back. When the spark module got here the burner caps were removed and then the wires were noted where they went on the module and then the pow
... Read more
er and gas were turned off. The spark module was removed and then the stove was tested and we were back in business.
Read less
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
Installation Instructions
Carolyn from Bellingham, MA
Top burners would not light. No "clicking" .
My husband and I replaced the igniter module, following directions we found online. We removed the old one, replaced it with the new one, and thankfully everything is working great!
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
Installation Instructions
David from JACKSONVILLE, FL
Symptom: No clicking spark to any of the burners.
Based on symptom, knew either switches or spark module. Checked continuity to each switch. Knew if only one faulty, entire harness must be replaced. Checked out good. Spark module isolated so replaced it.
This is the part that substitutes for the spark module and also the transformer. It is now all in one board.
This is the part that substitutes for the spark module and also the transformer. It is now all in one board.
Installation Instructions
HERBERT from ISELIN, NJ
stove will not start no spark or gas
part did not fix the problem, may be gas regulater ,well if you are changing this part,not to bad .remove the knobs bottom screws and two side screws front cover flips up and off ,the ignition control is in front of you right side ,remove the one screw that is looking at and everything slides out .i turned off the gas and elec and removed
... Read more
the gas line and carefully laid the stove on it back.made it easier ,good luck
Read less