Crosley Range Circuit Boards and Touch Pads

Crosley Appliance Parts
Shop By Part Type

Popular Crosley Range Circuit Boards and Touch Pads

Your Price
$27.72
  In Stock
Overlay - Black
★★★★★
★★★★★
(1)
PartSelect Number PS2581726
Manufacturer Part Number 316220725
Installation Instructions
Theodore from PLAINFIELD, NJ
F 10 code OvenClock/Timer
After watching video on YouTube. It was very easy. I remove 6 screws from back panel then disconnect wires from clock removed 4 screws from clock. Replace new Clock put 4 screws.6 screw on panel. Plug in Gas Range. Job completed. Read more...
Your Price
$30.74
  In Stock
Overlay - White
★★★★★
★★★★★
(1)
PartSelect Number PS2581725
Manufacturer Part Number 316220722
Overlay only. Board is NOT included.
Your Price
$27.24
  In Stock
Overlay - Black
PartSelect Number PS2581771
Manufacturer Part Number 316419141
This is the overly only. Control board is NOT included. Black in color. Genuine OEM part.
Fixes these symptoms
Installation Instructions
Robert from Slidell, LA
Bake element blew out
Removed and replaced bake element. Discovered that oven control module had also blown out. Ordered and replaced new control unit. Stove placed back in service. Read more...
Your Price
$34.09
  In Stock
Overlay
PartSelect Number PS2581770
Manufacturer Part Number 316419140
Your Price
$275.91
  In Stock
Spark Module
★★★★★
★★★★★
(3)
PartSelect Number PS11753037
Manufacturer Part Number WPW10331686
This is the part that substitutes for the spark module and also the transformer. It is now all in one board.
Fixes these symptoms
  • Little to no heat when baking
  • Will Not Start
  • See more...
Installation Instructions
HERBERT from ISELIN, NJ
stove will not start no spark or gas
part did not fix the problem, may be gas regulater ,well if you are changing this part,not to bad .remove the knobs bottom screws and two side screws front cover flips up and off ,the ignition control is in front of you right side ,remove the one screw that is looking at and everything slides out .i turned off the gas and elec and removed the gas line and carefully laid the stove on it back.made it easier ,good luck Read more...
Your Price
$27.25
  In Stock
Overlay - White
★★★★★
★★★★★
(1)
PartSelect Number PS2581767
Manufacturer Part Number 316419137
Your Price
$197.74
  In Stock
Electronic Control Board
★★★★★
★★★★★
(3)
PartSelect Number PS2378933
Manufacturer Part Number 316557205
This part controls the functions of your oven such as bake, broil, timed bake and the clock.
Fixes these symptoms
  • Little to no heat when baking
  • Oven is too hot
  • Touchpad does not respond
  • See more...
Installation Instructions
Tilden from Young Harris, GA
Electronic Timer/Control Board malfunction
The part ordered and received was a direct replacement for the faulty electronic control board. I disconnected the electrical service, removed the back panels, disconnected the electrical connectors (after drawing a diagram with the wire colors clearly identified) before removing the holding screws. I removed the front legend cover from the old part and installed in on the face of the new electronic board. I installed the electronic board, connected the wires and connectors, installed the rear panels and tested the burners and the oven elements. All of the functions worked properly with the new electronic control board and an oven thermometer confirmed the oven temperature to be correct at several settings. The lady-of-the-house is now HAPPY. Read more...
Your Price
$31.44
  In Stock
Overlay - White
PartSelect Number PS2581766
Manufacturer Part Number 316419134
Your Price
$42.24
  In Stock
Overlay - White
PartSelect Number PS3495603
Manufacturer Part Number 316419354
NOTE: Control board is NOT included. Overlay only.
Your Price
$42.17
  In Stock
Clock Timer Overlay - Black
★★★★★
★★★★★
(1)
PartSelect Number PS978025
Manufacturer Part Number 316419303
Fixes these symptoms
Installation Instructions
Nicholas from McHenry, IL
When I was cleaning the oven the plastic clock timer overlay melted.
I removed the back panel on the stove. Then I removed the switch plate, and pulled the melted plastic overlay off and replaced it with the new one. Read more...

Related Parts