Crosley Range Elements and Burners | Replacement Parts & Accessories | PartSelect

Popular Crosley Range Elements and Burners

Your Price
$41.20
Oven Bake Element
PartSelect Number PS438018
Manufacturer Part Number 316075103
Fixes these symptoms
Element will not heat
Little to no heat when baking
Little to no heat when broiling

See more...
Installation Instructions
David from Shawnee, KS says,

Oven woudn't heat
1. Removed two screws, pulled out the element, voltage tested the element and determined it was an open circuit (bad element).
2. Ordered the part from partselect.com
3. Disconnected elem...read more

Your Price
$7.61
Terminal Block Kit
PartSelect Number PS470125
Manufacturer Part Number 5303935058
This part connects the wire harness to the surface element and is used for ranges. The kit includes interchangeable mounting brackets, ceramic wire nuts, heat shrink protective tubing, and wires. If your range/oven is having symptoms such as burner not heating, heating elements not working, burning smell, or if the oven is making a buzzing noise then this could be the solution. The tools needed to replace the kit are wire strippers, a heat gun or hair dryer, and #1 square heard screw driver. Refer to the installation/instructional video for further guidance to accurately replace the element.
Fixes these symptoms
Element will not heat
Will Not Start


Installation Instructions
Steven from Taylors, SC says,

rental property stove only had 2 working burners and bottom drawer off track
first i took out burners then i took out the screws of the termnal block bracket. i then raised the lid on the stoveand clipped the wires on all 4 of the terminal block kits.i then slipped the shrink...read more

Your Price
$19.15
Surface Element - 8 Inch - 220V
PartSelect Number PS2339241
Manufacturer Part Number 316442300
If the burner element on your range will not heat up, or is damaged, it may need to be replaced. This part is 8 inches in diameter, and should not be confused with the smaller 6-inch model. The part is 220 Volts and 4 Turn. The burner element connects to the terminal block inside the range. To do this repair, simply remove the old surface element and replace it with the new part. This product is sold individually. As the surface element is hot when it is on, be sure to unplug the range from the power source before completing this repair.
Fixes these symptoms
Element will not heat
Will Not Start


Installation Instructions
Kathy from Lebanon, IN says,

burner quit working
pull out old burner, lifted range top change the terminal which took about 5 min. close top put new burner in and was ready to go. works great....read more

Your Price
$33.64
Surface Element - 8 Inch - 2600W
PartSelect Number PS2339242
Manufacturer Part Number 316442301
The range surface element provides heat to the cooking surface on top of the range. The element has a universal plug, is 8 inches in diameter, spans 5 coils in width and reaches 2600 watts. Before you begin your repair, ensure that the elements are turned off and have had time to cool. Once you have removed the element this is a good time to ensure the terminal is in good condition (they can wear over time) which may need to be replaced as well. This quick repair requires no tools except gloves for safety, and a small amount of time.
Fixes these symptoms
Element will not heat
Will Not Start


Installation Instructions
David from Encinitas, CA says,

burner shorted out
I followed the directions by clipping wires to old burner socket, splicing the wires to new terminal block, screwing down new "block bracket," and plugging in new burner....read more

Your Price
$15.17
Surface Element - 6 Inch
PartSelect Number PS2582086
Manufacturer Part Number 318372210
This part is sold individually. This is a part for your stove top. The surface element is what your cookware sits on. The element supplies heat at varying temperatures. This may need to be replaced if the coil has shorted out or the terminal block shorted, and this caused the connectors at the end to burn out. The element is set in place by springs. You will need to push the springs in to release the old element. Make sure the drip bowl is lined up with the terminal block and press the new element into place.
Fixes these symptoms
Element will not heat


Installation Instructions
Chhabildas from Charlotte, NC says,

Enement was blew out.
I order the Element and received just in 4 days. It is Real incredible. I just opened the box and replaced the burners....read more

Your Price
$96.23
Oven Bake Element
PartSelect Number PS3633414
Manufacturer Part Number 318255006
The 3000W bake element is located on the bottom of the oven cavity to supply heat for baking. The element terminals are male quarter inch spade connectors and have push-on wire terminals. If your oven is not heating evenly, the element will not heat, or there is little to no heat when baking, you may need to replace the element. This genuine OEM bake element. Please remember to disconnect the power to your oven before you start your repair.
Fixes these symptoms
Element will not heat
Little to no heat when baking
Oven not heating evenly

See more...
Installation Instructions
Van from Sanford, NC says,

oven element broken
The repair was simple; first I removed the 2 screws from the old element and disconnected the wires and then I inserted the new element reconnected the wires and replaced the screws . The repair was e...read more

Your Price
$38.87
Bake Element
PartSelect Number PS11744404
Manufacturer Part Number WP74010750
This bake element is for the bottom of your oven. The bake element supplies heat for baking. If you find there is little to no heat when baking, a burned out bake element, or food is taking too long to cook, these symptoms could be solved by replacing the bake element. Before starting this replacement, make sure the range is unplugged from the power source or shut off from the house circuit breaker. The tools needed is a Phillips screwdriver. For safety reasons, make sure to wear gloves.
Fixes these symptoms
Element will not heat
Little to no heat when baking
Oven is too hot

See more...
Installation Instructions
Heather from Huntsville, AL says,

The element broke in two pieces after food dried on it.
First, I unplugged the oven. Then, I removed the two screws that hold the element in place. After that, I gently pulled the element toward the front of the oven until the wires were exposed. I disc...read more

Your Price
$27.93
6-Inch Coil Burner Element
PartSelect Number PS2368974
Manufacturer Part Number 318372211
This element is a genuine OEM replacement part, has looped terminal ends, comes with a black medallion center, and fits most electric ranges. All burners are made of a heating wire that produces heat from electricity. Remove the non-functional burner element from the terminal block (or receptacle). Use a multi-meter to check for continuity. Check the end of the terminals for corrosion or heat damage. If there is corrosion or heat damage, replace the whole terminal block or receptacle at the same time you replace the damaged coil. Before you start this repair, make sure that the element is turned off and cool to the touch.
Fixes these symptoms
Element will not heat
Will Not Start


Installation Instructions
Matthew from Columbus, IN says,

Burners on 53 year old range kept going out
When we bought our home less than a year ago, we had three functional burners on our 40" wide 50's classic Kelvinator (not close to standard size these-a-days). After a few months of use, two more bur...read more

Your Price
$10.02
Surface Burner Receptacle Kit
PartSelect Number PS1570190
Manufacturer Part Number 12001676
The tools you will need to replace the surface burner receptacle kit on your range include a Phillips screw driver, and a pair of wire strippers. Before doing this repair, make sure to disconnect your appliance from the power supply and wear work gloves to protect your hands. The surface burner receptacle kit comes with a ceramic block, high temperature wire nuts, a metal bracket, and wires. Plastic parts can over heat and melt in your range, that is why this part includes ceramic and high temperature wiring. This part functions as the connection between the wire harness and the surface element in your range.
Fixes these symptoms
Element will not heat
Will Not Start


Installation Instructions
Richard from Carthage, NC says,

Stove top element not working due to bad receptacle.
Turned off the power at the breaker box, cut the wires approximately 5 inches from the bad receptacle and removed it after removing one screw. Stripped back the wires about 1/2 inch and attached the n...read more

Your Price
$35.34
Surface Burner Cap - Black
PartSelect Number PS2581740
Manufacturer Part Number 316261804
The surface Meduim 9.5K burner cap is located on the top of the burner head and is used in ranges and ovens. The burner cap helps spread out the burner flame for even heating, and protects the burner head from cooking spills. Without the cap you can have a burning gas torch. If your cap is missing or is discolored, replacing this part can solve the issue. This part comes in the color black. Remember to unplug your range from the power source and allow surface to cool before installing this part. Refer to the manual provided by the manufacturer for further installation instructions.
Fixes these symptoms
No Symptoms for this part