My Orders
Crosley Range Trim
GET YOUR OFFICIAL Crosley PARTS TO ENSURE VICTORY
Popular Crosley Range Trim
NOTE: The trim has been re-designed and no longer requires the screws. The dimples on the bottom hold them in place instead.
NOTE: The trim has been re-designed and no longer requires the screws. The dimples on the bottom hold them in place instead.
Installation Instructions
William from HADLEY, PA
Broken Trim Pieces
Remove vent trim from oven and set oven glass to the side. Next remove handle from vent trim (two screws). Next place handle on new vent trim. Place glass in place, (it is held in place by bottom of oven door and vent trim). next place side trim in place and place that side of the vent trim and loosely tighten screw holding trim into
... Read more
place at top of the glass. Next place the other trim into place under the vent trim and tighten the screws on both sides.
Read less
NOTE: The trim has been re-designed and no longer requires the screws. The dimples on the bottom hold them in place instead.
NOTE: The trim has been re-designed and no longer requires the screws. The dimples on the bottom hold them in place instead.
Installation Instructions
William from HADLEY, PA
Broken Trim Pieces
Remove vent trim from oven and set oven glass to the side. Next remove handle from vent trim (two screws). Next place handle on new vent trim. Place glass in place, (it is held in place by bottom of oven door and vent trim). next place side trim in place and place that side of the vent trim and loosely tighten screw holding trim into
... Read more
place at top of the glass. Next place the other trim into place under the vent trim and tighten the screws on both sides.
Read less
This white right-hand side oven door trim is a functional and aesthetic component designed to frame the outer edge of the oven door. Positioned along the door’s right side, it enhances insulation, helps retain heat, and protects the glass panel from damage. Its durable construction ensures long-term performance while contributing to a clean, finished appearance. Replacing a cracked or damaged trim restores the door’s structural integrity and visual appeal. Installation requires partial disassembly of the oven door and may involve removing screws or panels to access the mounting points.
This white right-hand side oven door trim is a functional and aesthetic component designed to frame the outer edge of the oven door. Positioned along the door’s right side, it enhances insulation, helps retain heat, and protects the glass panel from damage. Its durable construction ensures long-term performance while contributing to a clean, finished appearance. Replacing a cracked or damaged trim restores the door’s structural integrity and visual appeal. Installation requires partial disassembly of the oven door and may involve removing screws or panels to access the mounting points.
Installation Instructions
Philip from Vandalia, MI
Replace shattered outer door glass
This is not the best design. You'll need to have an extra set of hands to hold the trim pieces in place. Remember the glass is positioned outside [on top of]the trim pieces. Be careful as the trim pieces are rather brittle and can be hard to locate in their proper position. Position glass in the holding tabs at the bottom, hold glass ag
... Read more
ainst the trim pieces and gently position door handle over glass and trim.The handle holds everything together. No instructions are shipped w/ parts.
Read less
Screws are not included with the trim. Must order screws separately.
Screws are not included with the trim. Must order screws separately.
Installation Instructions
Philip from Vandalia, MI
Replace shattered outer door glass
This is not the best design. You'll need to have an extra set of hands to hold the trim pieces in place. Remember the glass is positioned outside [on top of]the trim pieces. Be careful as the trim pieces are rather brittle and can be hard to locate in their proper position. Position glass in the holding tabs at the bottom, hold glass ag
... Read more
ainst the trim pieces and gently position door handle over glass and trim.The handle holds everything together. No instructions are shipped w/ parts.
Read less
Trim only in white. Screws not included.
Trim only in white. Screws not included.
Installation Instructions
Jeffrey from Orange, CA
Rusted lower trim
Tried to do it myself and broke the left trim piece. Use two people!
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
This door trim kit provides a clean, finished look for your oven door while protecting the edges from wear. Designed as a three-sided frame for the sides and bottom, it enhances both the appearance and durability of the appliance. Replacing damaged or worn trim helps restore the oven’s overall look and ensures a secure, polished finish.
This door trim kit provides a clean, finished look for your oven door while protecting the edges from wear. Designed as a three-sided frame for the sides and bottom, it enhances both the appearance and durability of the appliance. Replacing damaged or worn trim helps restore the oven’s overall look and ensures a secure, polished finish.
Installation Instructions
Robert from WATERTOWN, MA
Broken Handle
1. Order part
2. Remove 2 top screws holding vent cover and carefully remove
cover
3. Open door all the way and lift, door will come of the microwave
4. Set door on a flat surface facing down
5. You will need a flat screwdriver,carefully set the screwdriver
between the door and the black plastic and ... Read more pry out completely
6. Remove screws holding handle. (This will be a good time to clean
the inside of this door)
7. Attach new handle tighten screws
8. Put black plastic back in door and press on all around make sure
that is set in place
9. Re-install door and vent.
2. Remove 2 top screws holding vent cover and carefully remove
cover
3. Open door all the way and lift, door will come of the microwave
4. Set door on a flat surface facing down
5. You will need a flat screwdriver,carefully set the screwdriver
between the door and the black plastic and ... Read more pry out completely
6. Remove screws holding handle. (This will be a good time to clean
the inside of this door)
7. Attach new handle tighten screws
8. Put black plastic back in door and press on all around make sure
that is set in place
9. Re-install door and vent.
Read less
