My Orders
KitchenAid Range Igniters
GET YOUR OFFICIAL KitchenAid PARTS TO ENSURE VICTORY
Popular KitchenAid Range Igniters
This gas range oven igniter is a flat-style component designed to initiate the heating process by glowing and igniting the gas for the bake burner. Essential for proper oven function, it ensures consistent and reliable heat for baking and broiling. Compatible with a wide range of models across brands such as Whirlpool, Maytag, KitchenAid, Kenmore, and others, this igniter addresses common issues including no heat, weak flame, uneven cooking, or delayed ignition. If the igniter glows but fails to light the burner, or if the oven doesn’t respond or heat evenly, replacement may be necessary. Before installation, disconnect power, shut off the gas supply, and verify compatibility with your appliance model. Handle the igniter carefully, as it is fragile.
This gas range oven igniter is a flat-style component designed to initiate the heating process by glowing and igniting the gas for the bake burner. Essential for proper oven function, it ensures consistent and reliable heat for baking and broiling. Compatible with a wide range of models across brands such as Whirlpool, Maytag, KitchenAid, Kenmore, and others, this igniter addresses common issues including no heat, weak flame, uneven cooking, or delayed ignition. If the igniter glows but fails to light the burner, or if the oven doesn’t respond or heat evenly, replacement may be necessary. Before installation, disconnect power, shut off the gas supply, and verify compatibility with your appliance model. Handle the igniter carefully, as it is fragile.
What this part fixes:
- Element will not heat
- Gas igniter glows, but will not light
- Little to no heat when baking
Installation Instructions
David from Temple Terrace, FL
Ignitor was bad on upper oven
First I removed the lower tray and all parts covering the ignitor on the upper oven. 2. Then I removed the screws holding down the ignitor and flame distributor. 3. I then had to pull out the oven from the wall and remove the back panel to expose the wires connecting the ignitor. This required the removal of about six screws but they
... Read more
were fairly easy to get to. 4. I disconnected the ignitor from the back panel then went around to the front of the oven and pulled out the ignitor and all of the attached parts. 5. Here's the tricky part. The screws holding the ignitor in place had fused from the heat and then the threads stripped when I tried to remove them. I had to use a dremel tool and cutting wheel to carefully cut the screws off and then went to buy some replacement screws from the hardware store. 6. I replaced them with a nut and a bolt, to hopefully avoid the same problem for later replacement if necessary. 7. I then replaced everything the same way it came out and all is working like new!
Read less
This broil igniter assembly comes with its own metallic mounting bracket and a 7-inch-long dual wire lead with a plastic plug. This part will need to be repaired if your oven element is giving off no heat or very little, or is not heating evenly. You may also notice a smell of gas. The ignitor may still be glowing, but could still have gone bad.
This broil igniter assembly comes with its own metallic mounting bracket and a 7-inch-long dual wire lead with a plastic plug. This part will need to be repaired if your oven element is giving off no heat or very little, or is not heating evenly. You may also notice a smell of gas. The ignitor may still be glowing, but could still have gone bad.
What this part fixes:
- Element will not heat
- Gas igniter glows, but will not light
- Gas smell
Installation Instructions
James from Berwick, ME
Oven wouldn’t heat up properly
My oven has two igniters so I needed to determine which one was the problem.
Using the amp/multi meter I tested the connection between the igniters and the valve, with the oven turned on, to find the bad igniter. Depending on the model of stove you have, the amp reading you need for a properly functioning igniter will vary. My ... Read more lower igniter read 2.7 amps with a rated amp between 3.3 and 3.6. So that was the culprit.
Replacing the igniter was easy. Two screws and a wire connected with a plug. I was able to do the diagnosis and unplug the wire without pulling the oven out. I pulled the drawer out and removed the two screws in a cover behind where the drawer was. You may not be so lucky…I have long arms.
I found removing the oven door made it easier to reach the igniter itself. To remove the door just open it slightly and pull up, it should come off easy…and replace in opposite manner.
Keep track of your screws and put it back together the way you found it except for the igniter that is.
Anyone with moderate technical skill could easily do this repair. The diagnosis is the hard part. I estimate I saved about $200 doing it myself.
Good luck.
Using the amp/multi meter I tested the connection between the igniters and the valve, with the oven turned on, to find the bad igniter. Depending on the model of stove you have, the amp reading you need for a properly functioning igniter will vary. My ... Read more lower igniter read 2.7 amps with a rated amp between 3.3 and 3.6. So that was the culprit.
Replacing the igniter was easy. Two screws and a wire connected with a plug. I was able to do the diagnosis and unplug the wire without pulling the oven out. I pulled the drawer out and removed the two screws in a cover behind where the drawer was. You may not be so lucky…I have long arms.
I found removing the oven door made it easier to reach the igniter itself. To remove the door just open it slightly and pull up, it should come off easy…and replace in opposite manner.
Keep track of your screws and put it back together the way you found it except for the igniter that is.
Anyone with moderate technical skill could easily do this repair. The diagnosis is the hard part. I estimate I saved about $200 doing it myself.
Good luck.
Read less
This oven bake igniter is a crucial component for gas ovens with Direct Spark Ignition (DSI) systems, designed to ignite the gas to light the bake burner. It is a genuine OEM part compatible with a variety of stove, oven, and range models. Before installing the igniter, ensure that both the house circuit breaker and gas supply are turned off for safety. Wear work gloves to protect your hands during installation. It's important to verify compatibility with your specific model before purchasing, as there can be slight variations in part sizes and shapes across different models.
This oven bake igniter is a crucial component for gas ovens with Direct Spark Ignition (DSI) systems, designed to ignite the gas to light the bake burner. It is a genuine OEM part compatible with a variety of stove, oven, and range models. Before installing the igniter, ensure that both the house circuit breaker and gas supply are turned off for safety. Wear work gloves to protect your hands during installation. It's important to verify compatibility with your specific model before purchasing, as there can be slight variations in part sizes and shapes across different models.
What this part fixes:
- Gas igniter glows, but will not light
- Little to no heat when baking
- Will Not Start
Installation Instructions
Mark from HOLLAND, MI
Faulty ignitor
Remove bottom plate take screws and hex head nuts remove wire unscrew ingnitor reverse process with new ignitor very easy
This can be used for either the bake igniter or broil igniter in your appliance. NOTE: The part may differ in appearance but will function the same as the original.
This can be used for either the bake igniter or broil igniter in your appliance. NOTE: The part may differ in appearance but will function the same as the original.
What this part fixes:
- Element will not heat
- Gas igniter glows, but will not light
- Gas smell
Installation Instructions
Robert from plymouth, NH
The broiler would work but the stove would not lite. I saw the igniter getting to a glow on the broiler and lite but the stove it would not so I figured the igniter might be shot.
1st I opened door to stove and removed the wire racks. Then removed lower panel to get to igniter. Then I had to slide stove away from wall. Remove panel on back for accesss to wires. The new part had a plastic connector and the original just used wire nuts for the connection. So I cut off connector and stripped 1/2 inch of the end. Remov
... Read more
ed wire nuts from old igniter. Back into the oven removed 2 screws pulled out old igniter. Installed new igniter with 2 screws stuck wires through small hole to rear. Back around to back of stove. Connected wires with wire nuts.(I did not see any differnce in wires and dont think it matters) put everything back together and fires that baby up. I am gonna say 15-30 min job
Read less
Is your oven not cooling like it used to? You might need a new blower, a crucial component that circulates air to safeguard controls, wiring, and other parts from overheating. We understand how important it is to keep your oven in top shape, and that's where the genuine OEM Whirlpool Blower comes in. Specially designed for wall oven installations, it helps bring your oven back to peak performance, ensuring effective and efficient cooling. This blower isn?t just for Whirlpool appliances?it's the perfect match for a wide array of models from KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef too. But remember, ovens can have subtle differences, so it's a good idea to match the part to your model's specifications. This way, you can be confident it?s the perfect fit for your oven's needs. Installing your new blower requires a little care. Please disconnect the power first because safety should always come first. And don?t forget to wear work gloves to protect your hands. So, ready for your oven to cool like it's brand new again? Choose the genuine OEM Whirlpool Blower, the key to maintaining a safe, balanced temperature within your oven while extending its longevity.
Is your oven not cooling like it used to? You might need a new blower, a crucial component that circulates air to safeguard controls, wiring, and other parts from overheating. We understand how important it is to keep your oven in top shape, and that's where the genuine OEM Whirlpool Blower comes in. Specially designed for wall oven installations, it helps bring your oven back to peak performance, ensuring effective and efficient cooling. This blower isn?t just for Whirlpool appliances?it's the perfect match for a wide array of models from KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef too. But remember, ovens can have subtle differences, so it's a good idea to match the part to your model's specifications. This way, you can be confident it?s the perfect fit for your oven's needs. Installing your new blower requires a little care. Please disconnect the power first because safety should always come first. And don?t forget to wear work gloves to protect your hands. So, ready for your oven to cool like it's brand new again? Choose the genuine OEM Whirlpool Blower, the key to maintaining a safe, balanced temperature within your oven while extending its longevity.
What this part fixes:
- Element will not heat
- Gas igniter glows, but will not light
- Will Not Start
Installation Instructions
Daniel from Needham, MA
spark igniter was weak and not lighting the flame.
Open top oven door and remove the 2 front screws which hold the burners and controls to the frame. DO NOT lift the burners more than an inch or so to look inside. You WILL bend the gas lines in the back if you do. Pull out stove from the wall, shut off gas supply and disconnect hose if needed to have room to work. Remove top back panel an
... Read more
d remove the 3 wires connecting the top burner assembly and also remove the 2 gas lines. Now you will be able to remove the burner assembly safely. Flip it over and try to unscrew the screw holding the igniter. When you fail, drill it out and get a small metal screw to replace it. The metal is soft and the screw is hard, so drill carefully. The rest is easy, put in the new igniter and screw. and put it back together.
Read less
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
This gas range oven spark igniter electrode is a critical component that creates the spark needed to ignite the gas for baking or broiling. It also detects the presence of a flame as part of the Direct Spark Ignition (DSI) system, ensuring safe and reliable operation. Common signs that this part may need replacement include intermittent ignition, repeated clicking without lighting, or the oven failing to heat. Installation typically involves disconnecting power and gas, removing the old electrode, and securing the new one in place.
This gas range oven spark igniter electrode is a critical component that creates the spark needed to ignite the gas for baking or broiling. It also detects the presence of a flame as part of the Direct Spark Ignition (DSI) system, ensuring safe and reliable operation. Common signs that this part may need replacement include intermittent ignition, repeated clicking without lighting, or the oven failing to heat. Installation typically involves disconnecting power and gas, removing the old electrode, and securing the new one in place.
This part is used to light the oven for the bake or broil.
This part is used to light the oven for the bake or broil.
What this part fixes:
- Element will not heat
- Gas igniter glows, but will not light
- Gas smell
Installation Instructions
John from Chicago, IL
Oven stopped working/Slow to ignite
Although the ignitors glowed brilliant yellow I learned from an expert there are 2 fail modes. 1. that they break and don't glow well enough to ignite the gas or 2. they get resistive over the years and do not pass enough current to open the valve. This is important to know because the current passes through the ignitor before it gets t
... Read more
o the valve. If the ignitor resists too much then the valve never gets enough power to open. As evidence you get slow ignitions until one day it stops altogether.
There are 2 ignitors in this oven. one for the broiler and 1 for the oven. The broiler is exposed so easily removed. For the oven you need to remove the flame spreader cover and the flame spreader. Need a good screw driver for all the screws in the oven because they get corroded from the hostile environment and also the factory torques them in pretty good when new. It is hard to get leverage leaning into an oven without leaning on the oven door which could unhinge it. With a good screw driver and getting a good seat into the screw you can break it loose. Then some muscle power to get it out. 1 screw refused to come out all the way so I grabbed it with some pliers and pulled and twisted it out. A trick I learned from my days as a mechanic is to use valve lapping compound on the screw driver. The diamond dust bites into the screw for a grip on those really bad ones.
The last tricky part is you have to remove the back cover on the oven, unplug the wires and pull the ignitor out through the oven. When you see the wires in the back you will see insulation packing.
Hint: If your smart you will tie a string to the wires before you pull it though so it is easier to pull the new ignitor wires back the same way. Else you need to use a stick to feel your way through the insulation packing to find the wires.
Hardest part of this job is undoing the screws. The rest is easy.
There are 2 ignitors in this oven. one for the broiler and 1 for the oven. The broiler is exposed so easily removed. For the oven you need to remove the flame spreader cover and the flame spreader. Need a good screw driver for all the screws in the oven because they get corroded from the hostile environment and also the factory torques them in pretty good when new. It is hard to get leverage leaning into an oven without leaning on the oven door which could unhinge it. With a good screw driver and getting a good seat into the screw you can break it loose. Then some muscle power to get it out. 1 screw refused to come out all the way so I grabbed it with some pliers and pulled and twisted it out. A trick I learned from my days as a mechanic is to use valve lapping compound on the screw driver. The diamond dust bites into the screw for a grip on those really bad ones.
The last tricky part is you have to remove the back cover on the oven, unplug the wires and pull the ignitor out through the oven. When you see the wires in the back you will see insulation packing.
Hint: If your smart you will tie a string to the wires before you pull it though so it is easier to pull the new ignitor wires back the same way. Else you need to use a stick to feel your way through the insulation packing to find the wires.
Hardest part of this job is undoing the screws. The rest is easy.
Read less
Discover the genuine OEM Surface Ignitor, specifically designed for optimal performance with certain Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef models. While seemingly identical to other parts, the unique size and shape of this surface burner spark electrode set it apart. Ideal for ranges, this surface burner ignitor does a crucial job, producing the spark that lights your surface burner. it is critical to ensure safety by unplugging the range and shutting off the gas supply before installing this part. Wearing work gloves will protect your hands during installation. Rest assured that this product is manufactured by Whirlpool, one of the most reputable names in the industry.
Discover the genuine OEM Surface Ignitor, specifically designed for optimal performance with certain Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef models. While seemingly identical to other parts, the unique size and shape of this surface burner spark electrode set it apart. Ideal for ranges, this surface burner ignitor does a crucial job, producing the spark that lights your surface burner. it is critical to ensure safety by unplugging the range and shutting off the gas supply before installing this part. Wearing work gloves will protect your hands during installation. Rest assured that this product is manufactured by Whirlpool, one of the most reputable names in the industry.
This surface igniter provides reliable ignition by generating the heat needed to light the burner safely and efficiently. Proper ignition improves cooking performance and safety. Replacing a worn igniter restores fast, consistent burner operation.
This surface igniter provides reliable ignition by generating the heat needed to light the burner safely and efficiently. Proper ignition improves cooking performance and safety. Replacing a worn igniter restores fast, consistent burner operation.
Installation Instructions
Ronald from ROSEVILLE, CA
Surface ignitor not working on one burner
Disconnect power and turn off gas. Remove all grills, knobs and burners. Under the burners are 2 Phillips head screws. Remove all 10 screws. Remove surface plate. Remove the one igniter with problem. There is a small metal clip holding it in place. Remove the wire. Install new ignitor and reverse all steps above.
Discover a comprehensive solution for your kitchen appliance repair needs with the Whirlpool Gas Oven Ignitor. Compatible with various Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef stoves, ovens, or ranges, this authentic ignitor is designed to be user-friendly. Boasting a gas oven igniter feature with a female plug end, the item simplifies the process of lighting your oven broil burner. To ensure safety, do not forget to shut off your house circuit breaker and gas supply in advance. Also, prefer wearing work gloves prior to its installation. Rely on this Whirlpool Gas Oven Ignitor to effortlessly ignite your culinary adventures.
Discover a comprehensive solution for your kitchen appliance repair needs with the Whirlpool Gas Oven Ignitor. Compatible with various Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef stoves, ovens, or ranges, this authentic ignitor is designed to be user-friendly. Boasting a gas oven igniter feature with a female plug end, the item simplifies the process of lighting your oven broil burner. To ensure safety, do not forget to shut off your house circuit breaker and gas supply in advance. Also, prefer wearing work gloves prior to its installation. Rely on this Whirlpool Gas Oven Ignitor to effortlessly ignite your culinary adventures.
Installation Instructions
Glenn from PITTSBORO, NC
Broiler burner fails to ignite
Unplug range
Shut off gas supply
Remove rear panel screws and panel with nut driver
Disconnect power plug from broiler element igniter
Open upper oven door
Remove screw from the front of the gas burner.
Remove screw using nut driver from rear of gas burner
Remov ... Read more e gas burner from oven and pull cord through from rear panel
Using nut driver, remove igniter from mount on gas burner
Install new igniter on mount on gas burner using nut driver
Reinstall is reverse of disassembly
Connect power and turn gas back on. Test igniter by activating broil on upper oven
Shut off gas supply
Remove rear panel screws and panel with nut driver
Disconnect power plug from broiler element igniter
Open upper oven door
Remove screw from the front of the gas burner.
Remove screw using nut driver from rear of gas burner
Remov ... Read more e gas burner from oven and pull cord through from rear panel
Using nut driver, remove igniter from mount on gas burner
Install new igniter on mount on gas burner using nut driver
Reinstall is reverse of disassembly
Connect power and turn gas back on. Test igniter by activating broil on upper oven
Read less