Inglis Refrigerator Ice Makers | Replacement Parts & Accessories | PartSelect

Popular Inglis Refrigerator Ice Makers

Replacement Ice Maker – Part Number: 4317943
Your Price
$110.05
Replacement Ice Maker
PartSelect Number PS358591
Manufacturer Part Number 4317943
This ice maker (Complete Icemaker Assembly, Whirlpool Icemaker Kit, Ice Maker Assembly, Refrigerator Ice Maker, Icemaker) receives water from the water inlet valve, freezes it, and dispenses it into the ice bucket until the bucket is full. Ice makers will need to be replaced every 3-10 years depending on the frequency of usage, and water quality. You can perform a voltage test with a multimeter or perform an inlet valve test. If you’re unable to make ice, or notice leaks then it may be a sign your ice maker is damaged and could be in need of a replacement. This model measures approximately 11x5 inches, is constructed of plastic and metal, and comes in black/silver. This ice maker is a complete assembly; the whole assembly attaches to the wall of your freezer.
Fixes these symptoms
Ice maker dispenses too little ice
Ice maker dispenses too much ice
Ice maker not making ice

See more...
Installation Instructions
GLENN from ORLAND PARK, IL says,

was not making ice
take out ice bucket, just loosen the top 2 screws, remove the bottom screw, slide ice maker up & out, srewdriver to release wiring harness clip, reverse to put back in. was very simple. did not instal...read more

Ice Bucket – Part Number: WPW10670845
Your Price
$78.08
Ice Bucket
PartSelect Number PS11757044
Manufacturer Part Number WPW10670845
Bucket only. All other parts sold separately. This part holds the ice once it's released from the icemaker.
Fixes these symptoms
Ice maker not making ice
Ice maker won’t dispense ice
Leaking

See more...
Installation Instructions
Robert from Valencia, CA says,

Ice maker's ice tray coating coming off, ice bin had foul odor.
I noticed the coating inside the ice maker, the lining on the surface that the water contacts when making ice, was chipping off. I replaced the ice maker with a new unit and now there's no more bits o...read more

Ice Maker – Part Number: WPW10190965
Your Price
$103.26
Ice Maker
PartSelect Number PS11749920
Manufacturer Part Number WPW10190965
This is an icemaker for your refrigerator/freezer. Take note that this part does not include the front cover, the wire harness, or the shut-off arm. These must be ordered separately or recycled from your old unit. This unit as a whole will allow your appliance to produce ice. This model makes eight radius ice cubes.If your ice maker is no longer making ice, dispensing ice, or if it is leaking, it will need to be replaced.
Fixes these symptoms
Ice maker not making ice
Ice maker won’t dispense ice
Leaking

See more...
Installation Instructions
Jamie from Mitchell, SD says,

Ice maker quit working
First I removed the three screws with a nut driver and then disconnected the wire plug from the old ice maker. I plugged in the new unit and re-installed the screws and instantly the unit started to ...read more

Add-on Ice Maker Kit – Part Number: WPW10715708
Your Price
$85.51
Add-on Ice Maker Kit
PartSelect Number PS11757272
Manufacturer Part Number WPW10715708
This genuine OEM ice maker kit is designed to fit refrigerators that did not originally come with an ice maker. This kit contains everything needed to install the new ice maker on your refrigerator including: the ice maker, ice bin, inlet valve, fill tube, and hardware. If your new ice maker does not function properly after being installed, check the freezer temperature. The freezer must to be around zero degrees Fahrenheit. Remember to disconnect the power and water supply to your refrigerator before beginning this installation. Make sure to check that your model is compatible with this part before ordering. Note: The manufacturer has updated this part. It may differ in appearance but will function the same as the original.
Fixes these symptoms
Ice maker not making ice
Ice maker won’t dispense ice
Leaking

See more...
Installation Instructions
Donald A. from ORLANDO, FL says,

Wanted to install ice maker in my freezer
I was clening my uprght freezer and noticed that it was preped for an icemaker. I first went to the Whilpool website and could not find my part as my freezer was a 2008 model.

I saw PartSel...read more

Icemaker Control Assembly – Part Number: W10190935
Your Price
$113.48
Icemaker Control Assembly
PartSelect Number PS2341896
Manufacturer Part Number W10190935
The “Icemaker Control Assembly” (Module & Motor Assembly, Ice Maker Control Module, Icemaker Module, Refrigerator Ice Maker Module) is what controls the actions of your ice maker. The control turns the timing cams and the ejector blades. It controls most of the basic parts and functions such as the heater, water inlet valve, the cube size, and cube ejection. If your ice maker control is broken it can no longer properly control the ice maker functions. It may not produce any ice, make small ice cubes, or have intermittent operation. This can occur due to normal wear and tear. The icemaker control assembly is attached to the ice maker mold, and is under the white cover. Test the icemaker control assembly by using a multimeter. If this reveals the assembly to be defective, you will need to replace this part. It is approximately 4.25 inches square, beige, and is constructed of plastic and metal. This replacement part features one icemaker control assembly, including the control module and the motor.
Fixes these symptoms
Ice maker not making ice
Ice maker won’t dispense ice
Leaking

See more...
Installation Instructions
Daniel from Suwanee, GA says,

No ice
removed flap door in front of icemaker...removed 3 screws with bolt heads...removed one additional screw with bolt head and ice unit slid out. I removed motor unit (pops out no screws). Replaced and h...read more

Ice Bin Auger Drum – Part Number: 4388736
Your Price
$40.11
Ice Bin Auger Drum
PartSelect Number PS372186
Manufacturer Part Number 4388736
This white ice bin auger drum comes with a washer.
Fixes these symptoms
Ice maker dispenses too little ice
Ice maker not making ice
Ice maker won’t dispense ice

See more...
Installation Instructions
john from seaford, VA says,

Plastic bits dispensed from Ice Dispenser in Door
Removed Ice bin from Fridge

Removed all bolts on bin with nut driver...about six

Removed housing...be careful with spring on crusher/cube control rod

Removed C clamp o...read more

Ice Container – Part Number: WP2196089
Your Price
$78.75
Ice Container
PartSelect Number PS11739219
Manufacturer Part Number WP2196089
This is an ice bin for the ice dispenser in your refrigerator/freezer. The ice bin collects the cubes dropped from the icemaker. Take note that the auger is not included with this container. If your current model is broken or damaged, it will need to be replaced. To make this repair you will need a 1/4-inch nut driver. This bin is white and made entirely of plastic. It is around 18 inches long and 12 inches wide.
Fixes these symptoms
Ice maker won’t dispense ice


Installation Instructions
Gary from Denham Springs, LA says,

Plastic broken around ice maker shaft
I removed the 4 screws from the inside front of the container that held the ice maker shaft in place. This allowed me to remove the old broken container from the front assembly. It was just a matter...read more

Water Fill Cup and Bearing – Part Number: WP628356
Your Price
$25.60
Water Fill Cup and Bearing
PartSelect Number PS11743318
Manufacturer Part Number WP628356
This refrigerator ice maker fill cup dispenses the water into the ice cube mold during the fill cycle. Replacing the water fill cup is a possible solution if you notice that the ice maker is leaking, or not making/dispensing ice. If you notice the fill cup has been damaged or cracked; replace the part straight away. This water fill cup is a genuine OEM part and will fit most refrigerators, but check the list of compatible brands to make sure yours is included before purchasing.
Fixes these symptoms
Ice maker dispenses too much ice
Ice maker not making ice
Ice maker won’t dispense ice

See more...
Installation Instructions
David from Chester, CA says,

The Bearing Cup Assembly was broken and ice would jamb against it during the ice making cycle.
I removed the ice maker from the refrigerator, by removing one screw on the underside bracket and loosening the two screws at the top side, then lifting the ice maker off the loosened screws. I then ...read more

Icemaker Motor Kit – Part Number: 8201515
Your Price
$112.40
Icemaker Motor Kit
PartSelect Number PS733947
Manufacturer Part Number 8201515
This kit includes the module motor, ejector arm, and ice stripper arm. The complete icemaker is sold separately.
Fixes these symptoms
Ice maker not making ice
Ice maker won’t dispense ice


Installation Instructions
ANDREW from DURANGO, CO says,

KITCHEN AID SIDE-BY-SIDE REFRIGERATOR ICE-MAKER stopped working due to a broken motor assembly.
Changing the KITCHENAID MOTOR ASSEMBLY TO THE ICE-MAKER was fairly straightforward. The hardest part was figuring out WHAT was broken and how to fix it. I was determined to save myself hundreds of d...read more

Floating Baffle – Part Number: W10852691
Your Price
$20.96
Floating Baffle
PartSelect Number PS11731223
Manufacturer Part Number W10852691
This ice auger support, also known as a baffle, is a manufacturer-approved replacement part for your refrigerator ice maker. This part can become cracked or damaged, preventing your ice auger from doing its job. This repair requires extensive disassembly; take photos as you go to make reassembly easier. To replace this part, life the ice door out of the way and life the ice arm into the off position. Pull out the ice bucket and use a 1/4 inch nut driver to remove the screws holding the ice container and connecting rod in place. Pry the e-clip and washer off the bottom of the auger assembly. Use a 9/16ths wrench to remove the nut at the bottom of the auger. Pull off the auger teeth assembly and replace the auger support with your new part. Now you can begin reassembling.
Fixes these symptoms
Ice maker won’t dispense ice


Installation Instructions
Lue from Wichita, KS says,

Clogged Ice shoot in freezer door (curshed ice)
First remove the ice container from the freezer
and dump all of the ice. Remove the four
screws holding the front ice container cover. Remove the control arm screw and bracket from the bot...read more