Inglis Refrigerator Lights and Bulbs

Your Price

$6.12

In Stock

Light Bulb - 40W

PartSelect Number PS884734

Manufacturer Part Number 8009

This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are most often used to light the inside of refrigerators and ranges. It features a standard socket base, which means you simply unscrew the burnt-out bulb and screw in the replacement. Depending on the appliance you may require a screwdriver or nut driver to access the light bulb. We recommend you wear work gloves while handling this replacement part.

Fixes these symptoms
No Symptoms for this part

Installation Instructions
judie from mays landing, NJ says,

interior drawers were off their rollers
pulled the washer out and replaces the top roller system on both sides and the replaced the weels and brackets on the bottom drwaer. however i had trouble putting the dish washer back correctly and ha...read more

Your Price

$9.68

In Stock

Light Bulb - 10W

PartSelect Number PS11739347

Manufacturer Part Number WP22002263

This ten watt appliance light bulb is two inches tall. It is used with both washers and dryers.

Fixes these symptoms
No Symptoms for this part

Installation Instructions
Edward from Andover, NJ says,

Dryer was sqeaking loudly when running
I Looked on internet sites for this type of problem.
Most sites said the support rollers could cause this.
I found your site PartSelect and with help of your diagrams of the machine ordered ...read more

Your Price

$41.34

In Stock

Light Socket Kit

PartSelect Number PS371236

Manufacturer Part Number 4387478

The light socket in your refrigerator houses the light bulb and connects it to the power source. If your refrigerator light is not coming on when you open the door, you may need to replace the light socket. Before you replace the light socket, be sure that your light bulb is in working condition, as this may solve the same problem. This light socket kit comes with 2 wire connectors, a light shield, and the new socket. The wire connectors that come with this kit are included so your new socket can replace a variety of old ones. If this light socket is different than your original, you will need to use the connectors to make it fit your refrigerator. Be sure to follow the instructions provided, so this part will fit your refrigerator properly.

Fixes these symptoms
Light not working

Installation Instructions
DANIEL from MINNEAPOLIS, MN says,

Light Would Not Go On In The Refrigerator
First I removed the old lightbulb from the socket and replaced it with a new one to confirm that the bulb was not the problem. I then pryed the socket out with a flat-head screwdriver. I could tell ...read more

Your Price

$38.57

In Stock

Light Cover Lens

PartSelect Number PS11739893

Manufacturer Part Number WP2254920

This part is used to cover up the light bulb.

Fixes these symptoms
No Symptoms for this part

Installation Instructions
Wayne from Helendale, CA says,

Light cover was missing, Lite socket loose
The light cover was missing so the shelf allowed for anything that was pushed back to hit the light, so the light socket broke out of the rear wall. I used expanding foam behind the light socket to gl...read more

Your Price

$37.90

In Stock

Light Cover Lens

PartSelect Number PS11740384

Manufacturer Part Number WP2317782

Fixes these symptoms
No Symptoms for this part

Installation Instructions
Jeff from Tulsa, OK says,

Broken drawer track, broken light lens, inoperative ice maker
The repairs were straight forward. The light lens and pan slide track were a simple matter of slipping the old out and installing the new. The door switch was a bit more tricky to remove. A quick chec...read more

Your Price

$10.25

In Stock

Light Bulb

PartSelect Number PS11765660

Manufacturer Part Number W10887190

This appliance light bulb is used for many Maytag brand refrigerators. This sixty watt light bulb is frosted. Sold individually.

Fixes these symptoms
No Symptoms for this part

Installation Instructions
Mark from Wyoming, RI says,

Freezer cold/reefer hot
Took out all shelves and racks. Pulled out plastic cover. Removed screws holding control unit. Removed unit and accresses defrost circuit board. Replacement is in a cover. One screw would not engage ...read more