My Orders
Inglis Refrigerator Doors
GET YOUR OFFICIAL Inglis PARTS TO ENSURE VICTORY
Popular Inglis Refrigerator Doors
This is a replacement dairy compartment door for your refrigerator. The dairy compartment door opens and closes to allow access to the dairy items stored in the refrigerator door. Because it is made of clear plastic, the door can occasionally become cracked and broken. When the door is cracked, it will need to be replaced. The door measures approximately 15 inches in length and 6 inches in width. To replace the door, carefully remove the old door and insert the new door, lipped edge down. This product is sold individually and is OEM part from the manufacturer.
This is a replacement dairy compartment door for your refrigerator. The dairy compartment door opens and closes to allow access to the dairy items stored in the refrigerator door. Because it is made of clear plastic, the door can occasionally become cracked and broken. When the door is cracked, it will need to be replaced. The door measures approximately 15 inches in length and 6 inches in width. To replace the door, carefully remove the old door and insert the new door, lipped edge down. This product is sold individually and is OEM part from the manufacturer.
Installation Instructions
Patricia from Inglewood, CA
Both parts were broken and required replacement.
The broken part was removed and new part installed without any trouble.
This part is the replacement compartment door for your refrigerator. It is made of clear plastic and is approximately 9 inches by 6 inches. The compartment door snaps into the walls of the dairy compartment on the refrigerator door itself and operates on a hinge so that it can open and close. The main reason to replace the compartment door is if yours is cracked, broken, or missing. To replace the compartment door, carefully remove the hinges, then attach the new door into the hinges. This part is sold individually and is an OEM part.
This part is the replacement compartment door for your refrigerator. It is made of clear plastic and is approximately 9 inches by 6 inches. The compartment door snaps into the walls of the dairy compartment on the refrigerator door itself and operates on a hinge so that it can open and close. The main reason to replace the compartment door is if yours is cracked, broken, or missing. To replace the compartment door, carefully remove the hinges, then attach the new door into the hinges. This part is sold individually and is an OEM part.
Installation Instructions
john from NORWOOD, MA
replaced cracked compartment door
removed old and installed new compartment door by hand.
This Refrigerator Dairy Door is a genuine replacement cover designed to protect dairy items stored in the door bin, such as butter, cheese, and yogurt. Made from clear, durable plastic, it helps maintain a slightly cooler environment within the compartment to preserve freshness. The approximate dimensions are 11" wide by 7" high, with technical specifications listed as about 11.75" L x 5.25" W x 5.75" H. Installation is simple—just snap the cover into place on the designated bin.
This Refrigerator Dairy Door is a genuine replacement cover designed to protect dairy items stored in the door bin, such as butter, cheese, and yogurt. Made from clear, durable plastic, it helps maintain a slightly cooler environment within the compartment to preserve freshness. The approximate dimensions are 11" wide by 7" high, with technical specifications listed as about 11.75" L x 5.25" W x 5.75" H. Installation is simple—just snap the cover into place on the designated bin.
Installation Instructions
Mark from DEARBORN, MI
Our old plastic dairy door had a broken part and it kept coming undone
The new door just popped into place. Took seconds to complete. Fast delivery too.
This door trim is used in refrigerators and is connected to the door handle. If the mounting tap is broken or there is discolouration from usage, it is best to replace this part to ensure it works well and looks good. The tools needed for this repair is a small screwdriver. To repair, first pull out the old door trim by placing the screwdriver in the gap between the trip and door handle and pushing upwards. Once you remove the old trim, you can replace it with the new door trim by aligning the slots on the trim with screws on the door. Slide the door trim down to install it. Remember to unplug appliance from the power source as a safety precaution before installation. For further installation instructions, refer to the manual guide provided by the manufacturer.
This door trim is used in refrigerators and is connected to the door handle. If the mounting tap is broken or there is discolouration from usage, it is best to replace this part to ensure it works well and looks good. The tools needed for this repair is a small screwdriver. To repair, first pull out the old door trim by placing the screwdriver in the gap between the trip and door handle and pushing upwards. Once you remove the old trim, you can replace it with the new door trim by aligning the slots on the trim with screws on the door. Slide the door trim down to install it. Remember to unplug appliance from the power source as a safety precaution before installation. For further installation instructions, refer to the manual guide provided by the manufacturer.
Installation Instructions
Gary from COLUMBUS, OH
The door shelf brace was missing.
I snapped the two end caps into the shelf rail and pushed it into place on the bottom of the inside door.Tolls were not needed as it was a perfect fit.
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
Installation Instructions
Cynthia from Atlanta, GA
Used frig was missing these items
Just installed them with my hands - very easy. I also found the website easy to navigate and find the parts I needed. Delivery was great also - good job!
Enhance your refrigerator with this robust and versatile door trim for Whirlpool appliances. This door shelf rail is designed to hold items conveniently on the door, adding additional storage space to your fridge. Despite the similarity in parts appearance, slight variations may occur, meaning some models may need the trim to be cut for a perfect fit. However, installation is a breeze, as this part easily snaps into place on the door. Please refer to your owner's manual for step by step installation guidance. Be assured that this is a genuine OEM part designed to work optimally with certain Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef models, enhancing the functionality and lifespan of your appliance.
Enhance your refrigerator with this robust and versatile door trim for Whirlpool appliances. This door shelf rail is designed to hold items conveniently on the door, adding additional storage space to your fridge. Despite the similarity in parts appearance, slight variations may occur, meaning some models may need the trim to be cut for a perfect fit. However, installation is a breeze, as this part easily snaps into place on the door. Please refer to your owner's manual for step by step installation guidance. Be assured that this is a genuine OEM part designed to work optimally with certain Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef models, enhancing the functionality and lifespan of your appliance.
This is a decorative front cover that is made of plastic that covers the opening to where the icemaker is located and disables contact by the user while the icemaker is engaged.
This is a decorative front cover that is made of plastic that covers the opening to where the icemaker is located and disables contact by the user while the icemaker is engaged.
Installation Instructions
Deneen from Oneonta, AL
Ice was missing ice door
This was very easy to install. Part Select had very fast shipping and reasonable prices. I love this website they have everything you need for your appliance. My ice door was very easy to install. I popped it into the grooves on the ice maker. It took about 30 seconds. THANKS PART SELECT YOU ARE GREAT!!!!!! :-)
