My Orders
Inglis Refrigerator Handles
GET YOUR OFFICIAL Inglis PARTS TO ENSURE VICTORY
Popular Inglis Refrigerator Handles
This is a door handle for your refrigerator or freezer, which allows you to easily open and close the door. Take note that the screws are not included when you order this part; you will need to keep the screws from your old handle when making this repair. You are going to need a Phillips screwdriver and either a flat-blade screwdriver or a putty knife for this repair. This handle is white and is nine inches long by almost four inches wide.
This is a door handle for your refrigerator or freezer, which allows you to easily open and close the door. Take note that the screws are not included when you order this part; you will need to keep the screws from your old handle when making this repair. You are going to need a Phillips screwdriver and either a flat-blade screwdriver or a putty knife for this repair. This handle is white and is nine inches long by almost four inches wide.
Installation Instructions
David from Vineyard Haven, MA
freezer door handle started to crack at one end
I removed two screws and the old handle. I installed the new handle with the two screws.
Handle only.
Handle only.
Installation Instructions
Debbie from Eagle, CO
door handle broke off
It would have been nice to know that screws were not included and/or show were screws could be purchased. Thank goodness I was able to reuse the top 2 and had an extra screw in my tool bag that fit the bottom, because the existing screw had been super glued into bottom part of handle.
Handle ONLY.
Handle ONLY.
Installation Instructions
Venus from Fort Lauderdale, FL
screws did not come with the part so make sure you keep the old ones
Delivery was very fast with this product. Just remove old screws and place new handle in place. very simple
White in color sold individually.
White in color sold individually.
Installation Instructions
Ronda from Moore, OK
Leak under Refrig (cracked Water inlet Value)
I bought a refrigeator that was stored in a public storage area. When I initally connected the water source to the refrig, there was a big wter leak under the refrig. The repair was quite easy once you identify the part that is broken. Day 1 (Investigate the leak): I pulled out the refrig. I removed the screws (7) holding the botto
... Read more
m cardboard panel. Once done, I removed the screws (2) holding the inlet value in place. I pulled out the value about inches and inspected what was wrong. (There was a hairline crack in the body of the value caused by the water freezing when it was stored outdoors). I wrote down all the numbers off of the valve and then I ordered my parts online from PartsSelect (plug for company!!!). I also ordered a water filter, since it had cracked as well. I put everything back together in reverse order, and left the water turned off. Day 2 (3 days after ordering parts). Took apart the refrig again, just like Day 1. I read the instructions that came with the Water Inlet Valve and they were "exact". Disconnected the electrical connectors. I had the push-in fitting type of hose connector, so I simply pushed in (not pull!!!) the collet (colored collar around the opening) inward towards the valve and pulled the tubing (4) away from the valve. VOILA!!! Real easy! I compared the old valve and the new valve...yup, correct part! Now the installation was a breeze! I simply reversed the order. Pushed in all the hoses into the correct fittings, reconnected the electrical connectors, and reinstalled the valve to the refrig, and attached the water filter in the front of the refrig. I turned on the water source and checked for leaks. No surprises here!!! The connections held and there were no leaks! I reinstalled the cardboard backing and I pushed back the refrig in place.
Moral of my story: if you are going to store your refrigerator outdoors, drain all the water from the water and ice maker system!!!
Moral of my story: if you are going to store your refrigerator outdoors, drain all the water from the water and ice maker system!!!
Read less
Sold individually.
Sold individually.
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
This freezer door handle is made of plastic and is white in color. This is the handle only. Screws are not included, must be ordered separately.
This freezer door handle is made of plastic and is white in color. This is the handle only. Screws are not included, must be ordered separately.
Installation Instructions
Angelo from NANTUCKET, MA
Broken freezer door handle
Just installed the 4 screws
Handle Only.
Handle Only.
Installation Instructions
Steven from Cypress, TX
We had an accident while moving the refrigerator from one home to another and we broke both handles.
All I did was screw the handles on the front door. I had to re-do the freezer handle because I put that one on upside down. I knew I had done so since I was able to refer back to your handly on-line schematic.
Model Number GC2223GEKW
Model Number GC2223GEKW