Ice Maker WPW10190965 | Official Whirlpool Part | Fast Shipping | PartSelect
Ice Maker – Part Number: WPW10190965
Ice Maker – Part Number: WPW10190965 Ice Maker – Part Number: WPW10190965 https://partselectcom.azureedge.net/Schematics/Maytag/ZIG3BJNW.gif

Ice Maker

Product Description

Ice Maker Specifications

This is an icemaker for your refrigerator/freezer. Take note that this part does not include the front cover, the wire harness, or the shut-off arm. These must be ordered separately or recycled from your old unit. This unit as a whole will allow your appliance to produce ice. This model makes eight radius ice cubes.If your ice maker is no longer making ice, dispensing ice, or if it is leaking, it will need to be replaced.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

Ice maker not making ice, Leaking, Ice maker won’t dispense ice.

This part works with the following products:

Refrigerator.

This part works with the following brands:

Whirlpool, Kenmore, Amana, Maytag, Estate, Crosley, Inglis, KitchenAid, Roper.

Part # WPW10190965 replaces these:

626633, 626661, 626662, W10122506, W10122507, W10122510, W10190965, W10190966, W10190969, W10270037, WPW10190965VP.
Customer Repair Stories
Average Repair Rating: 4.3 / 5.0, 32 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Jamie from Mitchell, SD
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Parts Used:
WPW10190965
Ice maker quit working
First I removed the three screws with a nut driver and then disconnected the wire plug from the old ice maker. I plugged in the new unit and re-installed the screws and instantly the unit started to work. I did have to adjust the water level on the unit ...just turn the small plastic knob (use a slotted screw driver) on the side of the unit counterclockwise to increase the water level (do not turn more than one full turn or you could damage the unit) . It works perfect and saved me lots of money!!
103 of 118 people found this instruction helpful.
Was this instruction helpful to you?
Leopold from Warren, NJ
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Parts Used:
WPW10190965
Water overflow from the tray fusing ice cubes into a glob of ice in the bin below
The old ice maker's protective finish flaked off causing some cubes to stick to the mold and consequently water overflow into the bin below causing ice cubes to fuse into large ice globes. After reading customrs' reviews, the replacement with new icemeker from PartSelect was easy. I unpluged the fridge, loosend two screws on top of ice maker and removed one screw on the bottom, removed old ice maker and inserted the new one in its place. I reused the old wireing harness for new ice maker. It started producing ice within 2 hours and it works flowlessly since. Thank you PartSelect for sending the correct part and informative repair hints on your webside.
55 of 63 people found this instruction helpful.
Was this instruction helpful to you?
Dale from Elk Grove, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Parts Used:
WPW10190965
Needed to replace icemaker
After removing the old icemaker ( 3 screws) I put the new piece right back in place . Just plugged in the wiring that was already in place from the old icemaker, Hung the new ice maker on the two screws left in the wall of the freezer. Be sure and put the arm on the new icemaker prior to hanging it on the wall. tighten the screws and put the white plastic end cap over the exposed rotor end. Turn on the water to the refridgerator and in about two hours you will have ice. Be sure and turn off the water to fridge before undoing the old icemaker and unplug the fridge from elctric outlet during the whole process. Simple
31 of 37 people found this instruction helpful.
Was this instruction helpful to you?
Nancy from Ann Arbor, MI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers, Socket set
Parts Used:
WPW10190965
Old ice maker was leaking
Using the video at http://www.partselect.com/PS358591-Whirlpool-4317943-Replacement-Ice-Maker.htm?SourceCode=14 I was able to swap out the old ice maker and put in the new. It was easy. The trickiest part was working in the tight confines of a full freezer.
21 of 24 people found this instruction helpful.
Was this instruction helpful to you?
James from Edmond, OK
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Parts Used:
WPW10190965
Ice Maker Stopped Making Ice
I first went on line to trouble shoot. Discovered it was the Ice Maker itself then then I entered the part number in your system to purchase the ice maker unit. When the unit arrived I simply took a socket for three bolts unplugged the electrical connection and reversed this for the installation. It was simple. I described to my secretary the process and she told her husband who in turn replaced their icemaker.
16 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Tim from Olivebridge, NY
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Parts Used:
WPW10190965
Ice maker not working.
I had falsely assumed that the ice maker control module was the problem, so I ordered a new one and replaced it. Still no ice. Upon closer examination of the whole unit, I noticed the heating element had a corroded spot, and checked it with a continuity tester, and found it was bad. I ordered a new complete ice maker unit, and it was actually easier to replace the whole unit rather than just the control module, and only cost about $20 more. I was able to return the control module for a full refund. I would highly recommend replacing the whole ice maker if it is not working, rather than just the control module. It is also handy to know that there are little "ports" on the control module for testing all the functions with a multi-tester. One for the motor marked with an "M", "T" for thermostat, "H" for heater, "N" for neutral. Had I known all this from the start, it would have saved me a lot of time and trouble replacing the wrong part!
15 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Richard from Charlotte, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
WPW10190965
would not make ice
removed 3 screws and power wire clip, removed old ice maker, reinstalled new ice make by snaping in power wire clip and the 3 screws that hold ice maker, reinstalled wire bracket/arm that stops ice maker once tray is full of ice. done
12 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Jim from Manitowoc, WI
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
WPW10190965
Water was leaking from bottom of ice tray
After watching the instr. film I found it very easy to do.
This is what motivated me to do the job and save a LOT of money. It was actually the second repair I did.
11 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Brian from Alto, MI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
WPW10190965
Ice Maker stopped producing
Used a voltage meter to detect the problem (used a video from the web to determine how to isolate the problem. I needed to replace the unit, that I had repaired two years ago for $150.00 or more for parts an a service call. The part I ordered came right away and the repair took about 15 minutes.
9 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Vickie from Hays, KS
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
WPW10190965
Icemaker intermittenly makes ice
Watched the website repair & adjustment video, ordered the part which was exactly like the one currently in the fridge. Took only 10 min. to install. Then, 2 hours later we had ice! And still have ice on a consitent basis. Easy fix, life's good!
9 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
13 Reviews
4.8
out of 5
Filter By Rating:
  • 5 Stars
    11
  • 4 Stars
    2
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Model Cross Reference

This part works with the following models:

PartSelect Number: PS11749920
Manufacturer Part Number: WPW10190965
Brand
Model Number
Description
Kenmore
106.55122700
Refrigerator - Kenmore Refrigerator Model 106.55122700 (10655122700, 106 55122700) Parts
Kenmore
10650212010
Refrigerator
Kenmore
10650212011
Refrigerator - REFRIGERATOR
Kenmore
10650222010
Refrigerator
Kenmore
10650223010
Refrigerator
Kenmore
10650228010
Refrigerator
Kenmore
10650229010
Refrigerator
Kenmore
10650342010
Refrigerator
Kenmore
10650343010
Refrigerator
Kenmore
10650343011
Refrigerator - REFRIGERATOR
Kenmore
10651102110
Refrigerator
Kenmore
10651103110
Refrigerator
Kenmore
10651103111
Refrigerator - REFRIGERATOR
Kenmore
10651109110
Refrigerator
Kenmore
10653532300
Refrigerator
Kenmore
10653534300
Refrigerator
Kenmore
10653542300
Refrigerator
Kenmore
10653544300
Refrigerator
Kenmore
10654586401
Refrigerator
Kenmore
10654596401
Refrigerator
Kenmore
10655386401
Refrigerator
Kenmore
10655396401
Refrigerator
Kenmore
10655546402
Refrigerator
Kenmore
10656186501
Refrigerator
Kenmore
10656196501
Refrigerator
Kenmore
10656586501
Refrigerator
Kenmore
10656596501
Refrigerator
Kenmore
10656612500
Refrigerator
Kenmore
10656619500
Refrigerator
Kenmore
10656622500
Refrigerator