Crosley Washer Panels
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos

Popular Crosley Washer Panels
Your Price
$99.15
In Stock
Bottom Panel - White
PartSelect Number PS975731
Manufacturer Part Number 134321702
This is the replacement bottom panel or access panel for your dryer or washer. It is white in color and is approximately 28 inches wide and 10 inches tall. The access panel can be removed from the bottom of your dryer, so you can access the parts behind it. The main reason that you would want to replace the panel is if it is damaged, or it will not stay attached to the dryer. This part is sold individually and is an authentic OEM part sourced directly from the manufacturer.
Fixes these symptoms
- Leaking
- See more...
Top Panel - White
PartSelect Number PS3490398
Manufacturer Part Number 137371700
Used on front-load washers and dryers.
Top Panel
After I finally got all of the parts (at least the rear brackets and screws) I found that the panel only had one of two holes for the two horizontal screws.
After drilling a new hole in the left rear bracket position, I discovered that the 2 screws could not be threaded into the bracket pilot holes. Theyt froze up at the top of the taper in the threads. I had to increase the size of the hole 1/64" to get the screws in. There also is a trick to getting the bracket through the punched out hole in the panel- you must angle the bracket corner to corner then apply about 10# of preasure to the bracket to force it through the hole.
Other than that, the panel install went pretty well. Now I have to get the front brackets and springs and screws which are on backorder... Read more...
PartSelect Number PS419347
Manufacturer Part Number 134086842
Installation Instructions
RICHARD from RAVENSDALE, WA
No top Panel
(This is reply #2 of 2)After I finally got all of the parts (at least the rear brackets and screws) I found that the panel only had one of two holes for the two horizontal screws.
After drilling a new hole in the left rear bracket position, I discovered that the 2 screws could not be threaded into the bracket pilot holes. Theyt froze up at the top of the taper in the threads. I had to increase the size of the hole 1/64" to get the screws in. There also is a trick to getting the bracket through the punched out hole in the panel- you must angle the bracket corner to corner then apply about 10# of preasure to the bracket to force it through the hole.
Other than that, the panel install went pretty well. Now I have to get the front brackets and springs and screws which are on backorder... Read more...
Related Parts
- All Crosley Washer parts
- Crosley Washer Agitators
- Crosley Washer Bearings
- Crosley Washer Belts
- Crosley Washer Brackets and Flanges
- Crosley Washer Caps and Lids
- Crosley Washer Circuit Boards and Touch Pads
- Crosley Washer Dispensers
- Crosley Washer Doors
- Crosley Washer Drums and Tubs
- Crosley Washer Hardware
- Crosley Washer Hinges
- Crosley Washer Hoses and Tubes
- Crosley Washer Knobs
- Crosley Washer Latches
- Crosley Washer Legs and Feet
- Crosley Washer Motors
- Crosley Washer Pulleys
- Crosley Washer Pumps
- Crosley Washer Seals and Gaskets
- Crosley Washer Springs and Shock Absorbers
- Crosley Washer Switches
- Crosley Washer Transmissions and Clutches
- Crosley Washer Valves
- Crosley Washer Wire Plugs and Connectors