EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

Amana Dryer Motors

Popular Amana Dryer Motors

This OEM drive motor is designed to operate the drum in electric and gas dryers by turning the drive belt, enabling proper rotation during drying cycles. Compatible with most Whirlpool-incorporated dryer brands manufactured before 1996, it includes a pre-attached pulley, which is not available separately. If the motor has shorted out or failed, the drum will no longer spin, and replacement is necessary to restore full functionality. Installation requires disconnecting the dryer from its power source before removing the old motor and installing the new one. This component is sold individually and meets original equipment standards for performance and reliability.
This OEM drive motor is designed to operate the drum in electric and gas dryers by turning the drive belt, enabling proper rotation during drying cycles. Compatible with most Whirlpool-incorporated dryer brands manufactured before 1996, it includes a pre-attached pulley, which is not available separately. If the motor has shorted out or failed, the drum will no longer spin, and replacement is necessary to restore full functionality. Installation requires disconnecting the dryer from its power source before removing the old motor and installing the new one. This component is sold individually and meets original equipment standards for performance and reliability.
What this part fixes:
  • Drum Not Spinning
  • Noisy
  • Too hot
Installation Instructions
Mark from Fremont, NE
Wife told me Dryer would make a funny sound, then stop + had an a funny smell as well. The Electric motor that drove the unit was overheating and locking up, It was time to be replace.
The best part of my repair was I had everything back in service in 3 days. And one of these days was to consider just buying a new dryer. Had parts overnited and all parts fit and easy to replace.

1) Removed back - 6 screws
2) Removed dryer vent - 2 screws on top, 3 on bottom
3) Popped the top open
4) Removed Front of dryer cabinet - 2 screws
5) Removed Belt
6) Removed Drum
7) Cleaned up all lint
8) Pop off motor retainers front and back
Here is the tricky part for me.
9) Removed vent fan on back of motor.
I did not know that the back of the fan was square, and you could put an open ended wrench on it to hold it while you also have a vice grip on the front motor shaft. Then its a simple left to loosey operation. I first tryed to turn the fan blade to take it off, but proved to be to tight.
10) Repeat backwards to reassemble

While I had it apart I also replaced the Drum support rollers & Installed a new belt. Not that diffucult of a repair Good Luck, was certainly better than buying a new one at + $300.00 at Black Friday rates.
This idler pulley assembly is sourced from the original manufacturer for use in dryers. The assembly includes the pulley wheel and bracket. It is found near the motor where it provides tension to the dryer belt, allowing it to rotate the drum during the drying cycle. Over time, the pulley wheel and its bearings can wear out leading to squeaking and grinding noises when the drum rotates. The bracket or pulley wheel can also fall out of alignment which can damage the belt and cause it to slip off. Eventually, a faulty idler pulley assembly will prevent the drum from rotating altogether. Depending on your dryer model, you may need to disassemble the dryer to access the pulley assembly. Remove the dryer belt from the idler pulley wheel and detach the assembly from the dryer frame. Position the new assembly in its place and secure it in position. Thread the belt over the pulley and around the dryer drum, ensuring that the grooved side lays flat against the drum. Manually spin the drum to check that the belt is properly tensioned and reassemble your appliance.
This idler pulley assembly is sourced from the original manufacturer for use in dryers. The assembly includes the pulley wheel and bracket. It is found near the motor where it provides tension to the dryer belt, allowing it to rotate the drum during the drying cycle. Over time, the pulley wheel and its bearings can wear out leading to squeaking and grinding noises when the drum rotates. The bracket or pulley wheel can also fall out of alignment which can damage the belt and cause it to slip off. Eventually, a faulty idler pulley assembly will prevent the drum from rotating altogether. Depending on your dryer model, you may need to disassemble the dryer to access the pulley assembly. Remove the dryer belt from the idler pulley wheel and detach the assembly from the dryer frame. Position the new assembly in its place and secure it in position. Thread the belt over the pulley and around the dryer drum, ensuring that the grooved side lays flat against the drum. Manually spin the drum to check that the belt is properly tensioned and reassemble your appliance.
What this part fixes:
  • Drum Not Spinning
  • Noisy
  • Won’t Start
Installation Instructions
Vicky from BLOOMSBURY, NJ
Belt fell off because of belt roller on the tensioner melted, ciezed and fell off
Watched a video on utube, how to repair my 16 month old steam dryer. The hardest part was laying on my belly holding the spring loaded tensioner and slipping the belt on around the blower housing. Only cost me $23. Winning!
This 1/4 horsepower gas or electric clothes dryer motor carries 120 volts, 60 Hz, and 5.5 amps. It also performs 1725 revolutions per minute. This motor is used for some gas and some electric clothes dryers.
This 1/4 horsepower gas or electric clothes dryer motor carries 120 volts, 60 Hz, and 5.5 amps. It also performs 1725 revolutions per minute. This motor is used for some gas and some electric clothes dryers.
What this part fixes:
  • Drum Not Spinning
  • Noisy
Installation Instructions
Bryan from Everett, WA
Dryer would make humming noise and stop running as Motor would overheat.
This was much easier than I expected. I pulled the front covers, released the belt (just move tentioner pulley with fingers to release belt), removed the drum to access the motor. The motor was easy to remove. I loosened then nut in the fan assy using my channel locks (because I did not have a socket that big and then removed the wire harness clip to prepare the motor for removal. The two mounting clips were the tricky part as the fit over a metal ear on each side locked by the spring tension of the clips. It looks like a special tool my be available but I simply used my big straitslot and heavy downward pressure to remove and install. This repair can be completed by anyone with very basic mechanical skills and impress the spouse.
The blower shaft is 1-5/8 inches long, while the drive shaft is 1-1/4 inches long.
The blower shaft is 1-5/8 inches long, while the drive shaft is 1-1/4 inches long.
What this part fixes:
  • Drum Not Spinning
  • Noisy
  • Won’t Start
Installation Instructions
Kelly from Aptos, CA
Our dryer started squealing and would then stop running.
After determining that the dryer motor was the issue I wrote down the part number and logged on to partselect.com.

I input the number into the search box and there was the exact motor I needed.

The price was fair and the delivery quick so I figured I would give yuo guys a shot and see how it goes.

The part showed up on time and as expected. It was well packed and most importantly - it was the CORRECT part.

I disassembled the dryer which involved removing the lint trap, pulling out the blower fan and removing the motor cover. The motor was held in with 2 metal screws and wiring harness.

I took the belt off of the tensioner and pulled out the old motor. The motor was mounted with 2 clips which snapped off with ease. Reassembly was a breeze since the motor fit perfectly- the entire transplant operation took all of about 35 minutes.

I crossed my fingers, turned on the gas, plugged it in and........SUCCESS!

Since the dryer was down for over a week the backlog of laundry was piled pretty high. This replacement motor would immediately be put to the test.

It has been 5 days of non-stop drying and no squeeks, no squeels and nothing but dry clothes!

Thanks to Part Select for getting everything right the first time. It made a potentially very bad experience turn out as good as I could have ever hoped.
This drive motor rotates the drum by turning the belt.
This drive motor rotates the drum by turning the belt.
What this part fixes:
  • Noisy
Installation Instructions
Don from Elma, IA
Dryer would'nt start / drum wouldn't turn
Unplugged Dryer; used screwdriver to push in and release two clips that hold top to front, tilted top back and removed two screws holding front to sides. Disconnected door switch and removed front .
Reached in above motor to remove belt from around pulley and tensioner wheel, Pulled drum and belt out of machine.
Removed approximately 10 screws around perimeter of blower housing and removed cover to access blower wheel. Removed outer lock ring from shaft and clamp from blower wheel hub, and removed blower wheel.
Took out tensioner assembly.
Disconnected wiring connector from motor.
Removed three screws that held blower housing to bottom and removed retainer around rubber motor mount at pulley end of motor. Lifted out motor, blower housing and vent pipe as one unit.
Removed 2nd outer lock ring from motor shaft.
Rotated motor frame 45 degrees to free the rubber mount from the blower housing.
Screwed new pulley onto new motor shaft and cleaned blower housing and vent pipe.
Assembly is reverse of disassembly.
Inspected and lightly greased the glides and inspected the idler wheels before reinstalling drum.

Dryer works perfectly.

Five to ten minutes also spent unscrewing and replacing timer knob and hinge pins on lid of matching washer Crosley cw22b5v.

Very simple repair.
Original Equipment Manufacturer

MAKE THIS REPAIR A GUARANTEED WIN

OVER 2 MILLION PARTS TO ENSURE VICTORY

Amana Dryer Drive Motor
Part #WPW10448901
$250.63
In Stock
This dryer drive motor provides the rotational power needed to spin the drum and blower wheel, ensuring proper tumbling and airflow during drying cycles. Equipped with a pulley, it drives the belt that turns the drum while also powering the blower for efficient ventilation. A failing motor can cause issues such as the dryer not starting, humming without turning, stopping mid-cycle, or producing unusual noises. Replacing this part restores smooth operation and reliable performance. Installation typically involves disconnecting power, removing the front panel, and securing the new motor in place.
This dryer drive motor provides the rotational power needed to spin the drum and blower wheel, ensuring proper tumbling and airflow during drying cycles. Equipped with a pulley, it drives the belt that turns the drum while also powering the blower for efficient ventilation. A failing motor can cause issues such as the dryer not starting, humming without turning, stopping mid-cycle, or producing unusual noises. Replacing this part restores smooth operation and reliable performance. Installation typically involves disconnecting power, removing the front panel, and securing the new motor in place.
$53.20
In Stock
$256.95
On Order
This part is an induction drive motor for a dryer. This is an OEM replacement part sourced directly from the manufacturer. This part has a body and two shafts. One shaft is for the drive belt and the other is for the blower wheel. The drive shaft rotates the drive belt that spins the dryer drum to dry your clothing while producing air flow through the drum by rotating the blower wheel. If the motor cannot be turned by hand, it may be defective and should be replaced. Before ordering this part, check the door switch and thermal fuse to be sure those parts are not the issue with the dryer.
This part is an induction drive motor for a dryer. This is an OEM replacement part sourced directly from the manufacturer. This part has a body and two shafts. One shaft is for the drive belt and the other is for the blower wheel. The drive shaft rotates the drive belt that spins the dryer drum to dry your clothing while producing air flow through the drum by rotating the blower wheel. If the motor cannot be turned by hand, it may be defective and should be replaced. Before ordering this part, check the door switch and thermal fuse to be sure those parts are not the issue with the dryer.
Amana Dryer Motor-drve
Part #W10489550
$197.25
Special Order
Amana Dryer Motor
Part #WP35001080
   No Longer Available
Installation Instructions
THOMAS from LAS VEGAS, NV
Motors Went Bad
Due to the fact that there were access covers, it went a lot faster and easier. Washer had just two bolts and wire harness, and poof it was done (10-15 min). . . . . Now the dryer had a lot more screws to take off (mainly for covers/plates/panels), but after that, two clips and wire harness, it was done (30-35 min). . . . . . But the best part of the whole deal was the quick service I got from you guys. I had my part sooner than quoted and the cost and warranty were great. . . . . . Thanks for everything, tom horito