My Orders
Roper Refrigerator Handles
GET YOUR OFFICIAL Roper PARTS TO ENSURE VICTORY
Popular Roper Refrigerator Handles
This handle end cap kit, also known as a door handle end cap, includes both the upper and lower door handle caps for freezers and fresh food compartment handles. Used in refrigerators and freezers, the end cap covers the rear of the door handles. If your door does not close or open properly, this kit can solve the issue. *Please note: The handle is not included because they must be ordered separately. The only available color is chrome, the rest have been discontinued. Please refer to the diagram provided by the manufacturer for instructions.
This handle end cap kit, also known as a door handle end cap, includes both the upper and lower door handle caps for freezers and fresh food compartment handles. Used in refrigerators and freezers, the end cap covers the rear of the door handles. If your door does not close or open properly, this kit can solve the issue. *Please note: The handle is not included because they must be ordered separately. The only available color is chrome, the rest have been discontinued. Please refer to the diagram provided by the manufacturer for instructions.
Installation Instructions
Stephanie from Tucson, AZ
End Cap on refrigerator handle broke
I unscrewed the top broken end cap and bottom end cap (had to match-up the chrome pieces), attached the handle to both of the new end caps, and using a phillips screw driver, screwed them back on to the refrigerator. Very easy.
The blow-up illustration I used to order the part, it was very helpful.
The blow-up illustration I used to order the part, it was very helpful.
Handle only.
Handle only.
Installation Instructions
Debbie from Eagle, CO
door handle broke off
It would have been nice to know that screws were not included and/or show were screws could be purchased. Thank goodness I was able to reuse the top 2 and had an extra screw in my tool bag that fit the bottom, because the existing screw had been super glued into bottom part of handle.
Handle ONLY.
Handle ONLY.
Installation Instructions
Venus from Fort Lauderdale, FL
screws did not come with the part so make sure you keep the old ones
Delivery was very fast with this product. Just remove old screws and place new handle in place. very simple
This white refrigerator door handle is designed for top-freezer models and offers a secure, comfortable grip for opening and closing the appliance. Measuring approximately 19-1/2 inches in length, it can be trimmed to fit your specific refrigerator. Ideal for replacing broken or worn handles, this part installs easily with basic tools. Please note that mounting screws are not included and must be purchased separately. Always confirm compatibility with your appliance model before installation.
This white refrigerator door handle is designed for top-freezer models and offers a secure, comfortable grip for opening and closing the appliance. Measuring approximately 19-1/2 inches in length, it can be trimmed to fit your specific refrigerator. Ideal for replacing broken or worn handles, this part installs easily with basic tools. Please note that mounting screws are not included and must be purchased separately. Always confirm compatibility with your appliance model before installation.
Installation Instructions
David from Newport, RI
bottom of the door handle had rusted out and fallen off, among other things.
I forgot to order all the parts i needed, and when I placed a second order for the remaining parts on the same day, PartSelect contacted me and asked if I wanted to consolidate the order and save on shipping. I thought this was very thoughtful. Anyway, the lower door handle was very easy to replace, I just cut the handle to the correct
... Read more
length with a hacksaw, put the new end cap on, and screwed it in. The inside shelf end caps were a snap too. Just remove the old ones and snap the new ones in place. Done!
Read less
White in color sold individually.
White in color sold individually.
Installation Instructions
Ronda from Moore, OK
Leak under Refrig (cracked Water inlet Value)
I bought a refrigeator that was stored in a public storage area. When I initally connected the water source to the refrig, there was a big wter leak under the refrig. The repair was quite easy once you identify the part that is broken. Day 1 (Investigate the leak): I pulled out the refrig. I removed the screws (7) holding the botto
... Read more
m cardboard panel. Once done, I removed the screws (2) holding the inlet value in place. I pulled out the value about inches and inspected what was wrong. (There was a hairline crack in the body of the value caused by the water freezing when it was stored outdoors). I wrote down all the numbers off of the valve and then I ordered my parts online from PartsSelect (plug for company!!!). I also ordered a water filter, since it had cracked as well. I put everything back together in reverse order, and left the water turned off. Day 2 (3 days after ordering parts). Took apart the refrig again, just like Day 1. I read the instructions that came with the Water Inlet Valve and they were "exact". Disconnected the electrical connectors. I had the push-in fitting type of hose connector, so I simply pushed in (not pull!!!) the collet (colored collar around the opening) inward towards the valve and pulled the tubing (4) away from the valve. VOILA!!! Real easy! I compared the old valve and the new valve...yup, correct part! Now the installation was a breeze! I simply reversed the order. Pushed in all the hoses into the correct fittings, reconnected the electrical connectors, and reinstalled the valve to the refrig, and attached the water filter in the front of the refrig. I turned on the water source and checked for leaks. No surprises here!!! The connections held and there were no leaks! I reinstalled the cardboard backing and I pushed back the refrig in place.
Moral of my story: if you are going to store your refrigerator outdoors, drain all the water from the water and ice maker system!!!
Moral of my story: if you are going to store your refrigerator outdoors, drain all the water from the water and ice maker system!!!
Read less
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
This freezer door handle is made of plastic and is white in color. This is the handle only. Screws are not included, must be ordered separately.
This freezer door handle is made of plastic and is white in color. This is the handle only. Screws are not included, must be ordered separately.
Installation Instructions
Angelo from NANTUCKET, MA
Broken freezer door handle
Just installed the 4 screws
Handle Only.
Handle Only.
Installation Instructions
Steven from Cypress, TX
We had an accident while moving the refrigerator from one home to another and we broke both handles.
All I did was screw the handles on the front door. I had to re-do the freezer handle because I put that one on upside down. I knew I had done so since I was able to refer back to your handly on-line schematic.
This refrigerator handle provides a secure, comfortable grip for opening and closing the door. Finished in a warm biscuit tone, it restores proper function and appearance when the original handle becomes loose, cracked, or damaged.
This refrigerator handle provides a secure, comfortable grip for opening and closing the door. Finished in a warm biscuit tone, it restores proper function and appearance when the original handle becomes loose, cracked, or damaged.
Sold individually.
Sold individually.
Screws NOT included.
Screws NOT included.