Roper Refrigerator Trays and Shelves

Roper Appliance Parts
Shop By Part Type

Popular Roper Refrigerator Trays and Shelves

Your Price
$34.80
  In Stock
Refrigerator Door Shelf Bin - White
★★★★★
★★★★★
(136)
PartSelect Number PS11739091
Manufacturer Part Number WP2187172
This refrigerator door shelf bin, also known as the door bin, or sometimes just a "bucket", is an authentic manufacturer-certified part made of white plastic and is easy to install. It is used to hold items in the fridge door, like jars, cans, and bottles, and you'll be able to visually see if the part is broken or warped. This particular shelf attaches directly to the fridge door; you should be able to pull out the old bin and snap the new one into place by observing the slots and pushing the bin down into them. You can check if this model is right for your appliance by checking your user manual and model number. The door bin measures about 18 inches wide, 4.5 inches high, by 7 inches deep. This door shelf bin is sold individually, so if your refrigerator takes multiple bins, which many do, you will need to order the appropriate amount of bins.
Fixes these symptoms
Installation Instructions
Charles from Dallas, TX
One of my door bins and filter cap broke.
I searched the model number for my Whirlpool refrigerator on the internet and partselect.com came up so I clicked on it. The site asked for my model number which I typed in and there it was...a picture of my refrigerator in full detail and very well diagramed and labeled. I found the number of the parts I needed, added them to my cart and paid. In a few days (2 I think which is an awsome delivery time) the parts were iin my front door step, very well packaged and in imaculate condition. I took them out of the box and installed them in less than 15 minutes. A parts internet order and repair has NEVER gone as quick and easy as this did. Thankyou Partselect for an awsome job and awsome website and even more awsome delivery time. Very happy and impressed with your service. Keep up the outstanding work!!!!!! Read more...
Your Price
$7.75
  In Stock
Door Shelf Retainer Bar End Cap
★★★★★
★★★★★
(8)
PartSelect Number PS11738927
Manufacturer Part Number WP2156003
The door shelf retainer bar end cap connects to the retainer bar on your refrigerator’s door shelf, and attaches it to the refrigerator door. If your shelf retainer bar has become disconnected, a damaged end cap could be the cause. To remove the end cap, first unhook the release tab on both ends of the retainer bar. Slide out the bar and the end caps, and slide out the defective cap. Now, simply replace the end cap and snap the bar with end caps back in place on the refrigerator door. This part is made of white plastic and is sold individually.
Installation Instructions
Stefanie from Sycamore, IL
broken end cap
Simple....snapped it right on...the important thing is that we ordered it for a reasonable price, and it arrived quickly...within 3 days. thanks!!! Read more...
Your Price
$6.66
  In Stock
Door Shelf End Cap Kit
★★★★★
★★★★★
(11)
PartSelect Number PS371829
Manufacturer Part Number 4388286
This door shelf end cap kit contains two white end caps, two adhesive strips, and an instructions sheet. Each end cap can be used as either for the left side or the right side.
Installation Instructions
JOEL from Boynton Beach, FL
End Cap bracket broken when shelf over-filled.
Brackets rotated outward and lifted to disengage from door. Front metal strip removed from broken bracket. New bracket placed on shelf strip ends and replaced into door mount plastic. Hardest part was caused by manufacturer changing number of part and supplying it as a "kit" with both left and right bracket, as opposed to previously marking each end LS of RS and changing the configuration so that LS became RS. Joelle, in Customer Service was wonderful in figuring out the number change and sending me the correct part after I realized the originally ordered part was for the wrong side. Read more...
Your Price
$109.55
  In Stock
Crisper Cover with Glass
★★★★★
★★★★★
(13)
PartSelect Number PS4082908
Manufacturer Part Number W10508993
This part is also known as a shelf frame. This drawer cover is for refrigerators. Drawer cover has rail brackets under the cover that hold the drawer and allow the drawer to slide in and out on the rails. Follow the instructions in the owner's manual or installation guide when installing this part.
Installation Instructions
Maria from Albuquerque, NM
broken shelves
replaced with new shelves Read more...
Your Price
$84.68
  In Stock
Refrigerator Glass Shelf
★★★★★
★★★★★
(12)
PartSelect Number PS11731733
Manufacturer Part Number W10864399
This is the glass panel only. The frame is sold separately.
Installation Instructions
Sherry from Colorado Springs, CO
Glass Pan Cover / Shelf Broke
First of all, here's a warning to all -- I took the glass shelf / pan cover out to clean it -- with a sponge wet with COLD water and the shelf literally exploded on me. This is the second such incident. Both times I have been lucky and no one was hurt.

The shelf was easily identifiable by part number based on model number. Easy to locate the model number on plate above top shelf inside refrigerator (right hand side in my case).

Only had to carefully set glass shelf in frame -- no issues. I was able to use a screwdriver to remove the shelf support stud and basically pop the replacement back in with no issue.

Thank you Parts Select for your simplified system to order replacement parts, and the speed with which it was received.
Read more...
Your Price
$8.91
  In Stock
Door Shelf End Cap Set
★★★★★
★★★★★
(16)
PartSelect Number PS370794
Manufacturer Part Number 4386917
This door shelf end cap set contains two white end caps. Each end cap can be used as either the right or the left side. These end caps also come with adhesive strips and an instructions sheet.
Installation Instructions
David from Newport, RI
bottom of the door handle had rusted out and fallen off, among other things.
I forgot to order all the parts i needed, and when I placed a second order for the remaining parts on the same day, PartSelect contacted me and asked if I wanted to consolidate the order and save on shipping. I thought this was very thoughtful. Anyway, the lower door handle was very easy to replace, I just cut the handle to the correct length with a hacksaw, put the new end cap on, and screwed it in. The inside shelf end caps were a snap too. Just remove the old ones and snap the new ones in place. Done! Read more...
Your Price
$43.36
  On Order
Door Shelf Retainer Bar
★★★★★
★★★★★
(14)
PartSelect Number PS11754563
Manufacturer Part Number WPW10421486
End caps are sold separately.
Installation Instructions
Julie from Oak Park, MI
Drawers were cracked, trim had fallen off.
No need for tools. Read more...
Your Price
$36.53
  In Stock
Door Shelf
★★★★★
★★★★★
(8)
PartSelect Number PS11740306
Manufacturer Part Number WP2309941
This authentic Whirlpool refrigerator part is a door shelf rail. It snaps into your refrigerator door and prevents items from sliding or falling out when your open the door. It is made of plastic and is approximately 17 inches in length by 5 inches in width. To replace this part, simply snap out the old door shelf rail and install the new one.
Installation Instructions
Tammy from SHERMAN, TX
Shelf was broken on one side.
The repair was super easy. It took all of 10 seconds. From ordering the part to repair, I would use part select 100%! Excellent company with excellent parts. Thank you! Read more...
Your Price
$11.01
  In Stock
Door Shelf End Cap - Left or Right Side
★★★★★
★★★★★
(4)
PartSelect Number PS11739204
Manufacturer Part Number WP2195916K
Sold Individually.
Installation Instructions
patricia from collinsville, IL
the door trim was bent and broken and would not hold items in place
I only needed to set the endcap and trim piec es in place, no tools involved Read more...
Your Price
$7.90
  In Stock
Shelf Support Stud
★★★★★
★★★★★
(8)
PartSelect Number PS11738899
Manufacturer Part Number WP2149540
Sold individually.
Installation Instructions
Jerry from Fostoria, OH
Broken front roller set and a snapped shelf support.
While moving our refrigerator when remodeling the kitchen, the front roller assembly shattered from age. The original set was made of nylon and age made it very fragile. Also to make the move easier, we removed the shelves. In the process the lower shelf support stud snapped.

When the parts came the first thing repaired was the shelve support stud. Very easy job to do, just take the pliers and rotate the broken stud counterclockwise a quarter turn and remove. Put new stud in the hole in the same position as the removed stud and gently, but firmly rotate the stud a quarter turn clockwise until it seats.

The front roller assembly requires a socket set, block of wood about 1/2 - 1" thick flashlight and 4’ level. First, remove the front grill by opening both doors of the side by side and pulling the grill out of its left and right side anchors. Close the doors. Place the block of wood under the front support near the center. Remove the leveling screw from the old assembly and install it loosely in the new assembly as the new assembly has no leveling screw. This will now allow you to remove the old assembly by removing the remaining screw in the roller assembly on the front refrigerator support and turning the roller assembly slightly counterclockwise and pulling out the front. You may have to wiggle it, as it sits in a slot on the side support of the refrigerator. To install, place the new assembly in the same position as the old, locate the slot with the flashlight and push the roller set tab into the slot. Attach the support screw and tighten while holding the assembly in place. It is a good idea to replace both rollers at the same time. The same rollers will fit both sides. Now level the refrigerator by tightening the leveling screw until the front rollers now touch the floor. Next, place the level on the top of the refrigerator diagonally but not on top of the door supports. Turn the leveling screws until the bubble is in the center when the level is set in either diagonal position. Replace grill and you done.
Read more...

Related Parts