Roper Refrigerator Brackets and Flanges

Roper Appliance Parts
Shop By Part Type

Popular Roper Refrigerator Brackets and Flanges

Your Price
  In Stock
Control Bracket
110 Reviews
PartSelect Number PS11739027
Manufacturer Part Number WP2180226
This is a control bracket for your refrigerator, and may also be known as the dispenser control bracket. The function of this part is to hold the micro switches and the light socket in the freezer dispenser section in place. Its measurements are roughly 9 inches long and 5 inches high, and this model comes in white. The tools you will need in order to do this repair include a Phillips screw driver, a quarter-inch nut-driver, and a pair of needle-nose pliers. If your ice dispenser is not working properly, your bracket could be the problem.
Fixes these symptoms
  • Ice maker not making ice
  • Ice maker won’t dispense ice
  • Not dispensing water
  • See more...
Installation Instructions
Front Door Ice Wouldn't Work And Air Going Into Freezer
Thanks to the pictorial diagram, I was able to order correct parts. It was just a matter of removal of broken parts and replacing them. Ice maker now working and air is no longer getting into freezer which was freezing up ice maker. Thanks for timely delivery, now I am able to use ice dispenser, which I haven't used for long time. Thanks Read more...
Your Price
  In Stock
Bracket, Dispenser
PartSelect Number PS11740253
Manufacturer Part Number WP2304673
Installation Instructions
Sean from Boise, ID
Water dispenser hose tip broken.
The part to fix this was a $50.00 part.
I purchased this Bracket Dispenser for $6.00 and it fit on My fridge perfectly. I just used the screw hole that was a little higher on the water dispenser. Simply cut off the broken end / or Buy a new Hose (Cost at Lowes about $6.00) guide hose along the bracket and use a socken set to reinstall the screw. Water is not squirting on people any more.
Your Price
  In Stock
Gate Support - Right Hand
PartSelect Number PS364082
Manufacturer Part Number 4357293
This gate support is designed to support the gate or fence on your vertical freezer. This part is designed for the right-hand side and differs from the left-hand side gate support. Be sure to note which side of your gate support is damaged before ordering this part. This product is sold individually. It is white in color and is made entirely of plastic. The gate support is approximately 6.5 inches in length and slightly less than an inch in width. This is an OEM part sourced directly from the manufacturer.
Your Price
  In Stock
Kickplate Support Clip
5 Reviews
PartSelect Number PS11746875
Manufacturer Part Number WP944224
Sold individually.
Installation Instructions
Edward from Mequon, WI
Kickplate support Clips failed
Replacing the support clips was simple. But since the replacements were the same as the ones that had failed, I modified them by epoxying metal strips on each side of the fingers which had failed. Without this mod I think they would have failed very shortly like the original ones did. This added a half hour to the repair. Read more...
Your Price
  In Stock
Fan Motor Retainer/Bracket
PartSelect Number PS11738921
Manufacturer Part Number WP2155590
Your Price
  On Order
PartSelect Number PS11739921
Manufacturer Part Number WP2256087
Your Price
  In Stock
PartSelect Number PS11731157
Manufacturer Part Number W10850503
Your Price
  In Stock
PartSelect Number PS11751981
Manufacturer Part Number WPW10284485
PartSelect Number PS11751982
Manufacturer Part Number WPW10284487

Related Parts